Videos
for Camco
Help Articles
for Camco
Expert Answers
for Camco
You have a good eye as the black tubing sections are plastic for the Camco Gen-Turi RV Generator Exhaust System #CAM44461. It's just the curved pipe section that is made out of stainless steel.
view full answer...In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,…
view full answer...The Camco RV Refrigerator Vent Cover #CAM42163 is likely a fit for your roof vent base since it fits a base with a 5-1/4" x 24" base. These vent covers are designed specifically to fit Dometic and Norcold vents so you…
view full answer...The propane fitting adapter part #204129-MBS that you referenced has the propane flow through from the 1/4 male NPT side to the Type 1 fitting side.
view full answer...Hi Christopher, There unfortunately isn't a guide to tell us the exact part numbers for the vents, skylights, etc. on your Passport. We offer a variety of plumbing vents and 12v fan vents but we unfortunately do not offer skylights. If you want…
view full answer...For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…
view full answer...The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…
view full answer...Hey Chris, it sounds like all you'd need to connect the MB Sturgis Propane Extension Hose for Small Appliance #100284-144-MBS to the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 is the MB Sturgis…
view full answer...We do have the part you need, but it's different than the one you mentioned. I checked with Leer, and the correct replacement prop rod for the Leer Hard Tonneau Cover #LE42FR on your 2018 Ford F-250 is the following: - Replacement Prop Rod…
view full answer...Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…
view full answer...Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…
view full answer...The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…
view full answer...
What our customers are saying:
"very easy to shop"