Videos
for Flint Hill Goods
Help Articles
for Flint Hill Goods
Expert Answers
for Flint Hill Goods
The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…
view full answer...From the top of the Draw-Tite Max-Frame Trailer Hitch Receiver #75270, when installed on your 2007 Honda Odyssey, to the ground is going to be approximately 12-3/4". Adding on a 350lb wheelchair and 56lb carrier #FHG99ZR is definitely going to…
view full answer...The Curt Cargo Carrier #C18113 will definitely work with the etrailer #e25TR on your 2024 Outback. Keep in mind, you will be limited to the 350 lb max tongue weight of the hitch or the max tongue weight of your vehicle. Whichever is lower is what you…
view full answer...While we do not have a custom fit hitch for your Freightliner MT45 we do have several heavy duty weld-on hitches that could work for you. I have included a link to all of them for you. Based on your frame width you could use #41990 which is 44 inches…
view full answer...The Clearsource Ultra RV Water Filter System #CS87FR really is designed for "weekend warriors" such as yourself, who would only be using it occasionally, and are not living in the camper full time. It is very easy to set up and take down,…
view full answer...The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…
view full answer...I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…
view full answer...The overall height of the Timbren Spring Kit part #TGMRCK25D is 6-1/4 inches.
view full answer...The Draw-Tite Front Mount Trailer Hitch Receiver #65022 is rated for a 5,000 lb trailer and 500 lbs of tongue weight, and the amount of time isn't a factor. So you wouldn't be able to move a 10,000 lb trailer even if it is swift, as you are…
view full answer...You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…
view full answer...There is a hidden hitch for your 2022 Land Rover Range Rover, from Stealth Hitches. These are great because not only is the crosstube hidden, but you can completely remove the receiver or ball mount when you aren't using it so your Land Rover…
view full answer...With the trailer only weighing 2,200lbs you'd be looking at roughly a 220lb tongue weight if the trailer was fully loaded. I have two different trailer dolly options depending on your needs. If you want a standard no-frills option the Flint Hill…
view full answer...
What our customers are saying:
"very easy to shop"