Videos
for Timbren
Help Articles
for Timbren
Expert Answers
for Timbren
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…
view full answer...Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.
view full answer...Yes, the Timbren Rear Suspension Enhancement System #TGMRCK35S can still be used on your 2007 Chevy Silverado even though its been lifted. You'll just need to install a spacer to get the gap between the Timbren and the axle around 1" to…
view full answer...First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…
view full answer...For a 6" or 8" axle, I'm not seeing anything for that unfortunately - however, for your 14K livestock trailer, I recommend checking out the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01. This system will work…
view full answer...The brackets on the SumoSprings Trailer Helper Springs #SS26MV are 1-1/2" wide so they will fit evenly across the humps on your spring pads. I do not recommend cutting down the spring and you will be able to use these even with only having…
view full answer...Yes, for your 2024 Toyota Tundra using the Air Lift LoadLifter 5000 Air Helper Springs #AL84JQ you're going to need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL #AL52420 so the bags aren't being pulled apart.
view full answer...The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…
view full answer...I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.
view full answer...For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…
view full answer...The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want the…
view full answer...
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."