Most Popular Exposed Racks
Videos
for Exposed Racks
Help Articles
for Exposed Racks
Expert Answers
for Exposed Racks
You'll be pleased to hear the base of the: -Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475 measures 32" before the bar starts to curve upwards. I have also attached an image showing this measurement for you to…
view full answer...I may have a solution for you, however the Inno Truck Bed Cargo Rack #INRT101-79 referenced in your question is designed specifically for certain model truck beds, so it might not be the best fit for your utility trailer. For your trailer, I…
view full answer...I was able to go out to our warehouse and measure the height of the bend on the vertical support on the Malone TopTier Load Bar Kit for Utility Trailers #MPG493. The bend starts at 41.5", the middle of the bend is at 43.5" and it…
view full answer...The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs #T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you…
view full answer...Some roof racks have a higher static capacity, meaning it can hold more weight when vehicle is not in motion compared to when the vehicle is in motion. This is not the case with the Malone TopTier Load Bar Kit for Utility Trailers #MPG493. I…
view full answer...From what I could find, the Harbor Freight trailers do say not to exceed 45 miles per hour in the owners manual. That being said, the tires they use are not rated very high and may be the limiting factor. The trailer you have looks to use a 5 on 4…
view full answer...To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support…
view full answer...I am not exactly sure which width you are referring to on the Rhino-Rack Heavy-Duty Bar Roof Rack 65" #Y01-140B, so I will give you a few dimensions. The tracks running front to back on the roof measure 63" long and the internal track is…
view full answer...Thanks so much for reaching out to us about the Exposed Racks setup. When you say freedom panels, does your 2019 Wrangler have a sky one touch roof? Also, is it a 4-door model?
view full answer...Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…
view full answer...The Inno Feet for Square Crossbars are offered in a few different heights, 5.5" part #IN72FR, 7.5" part #INSD, and 9-7/8" part #INMDK. In order to see which is the best option for a 2019 Jeep Wrangler Unlimited with Sky Roof,…
view full answer...Definitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to…
view full answer...
What our customers are saying:
"very easy to shop"