Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
Question:
Will this axel fit my 4x8foot harbor freight trailer?
asked by: Joseph
Expert Reply:
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you will have a perfect fit. You will want to note that the hub face to hub face will be 60 inches.
If those dimensions are not a fit, then you may want to consider using the CE Smith Trailer Axle w/ Idler Hubs - EZ Lube Spindles - 5 on 4-1/2 - 57-1/2" Long - 1.8K # CE33201GA-HUB which have spring centers at 46-1/2 inches on center.
Your trailer carrying capacity will depend on all the components and not only the axle, so the weakest component weight rating will be your maximum trailer weight.
Products Referenced in This Question
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 25mm hub
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Video: Review of Dexter Trailer Leaf Spring Suspension - U-Bolt Kit For 2000 lb Round Axle - APUBR-10
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: Review of etrailer Trailer Axles - 60 Inch Long 2K Idler Axle - e48GR
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Q&A: Replacement Axle for Harbor Freight Utility Trailer
- Q&A: Should Trailer Axle have Bend In it that Faces Downward
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Search Results: thin line
- Search Results: haul master
- Search Results: 480x12 tire and rim
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Search Results: over under
- Search Results: drop axle
- Search Results: lowering kit
- Q&A: Recommended Replacement Axle for Harbor Freight Folding Trailer 62671
- Video: Review of etrailer by AxleTek Trailer Axles - 2 K Trailer Axle with Idler Hubs - e82GR
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Roof Rack
- Shop: Truck Bed Bike Rack
- Video: Review of Malone Trailers - Crossbar Conversion Kit - MPG475
- Video: Malone Utility Trailer TopTier Load Bar Kit Review and Installation
on Trailer Leaf Spring Suspension
