Malone Utility Trailer TopTier Load Bar Kit Review and Installation Video

Some roof racks have a higher static capacity, meaning it can hold more weight when vehicle is not in motion compared to when the vehicle is in motion. This is not the case with the Malone TopTier Load Bar Kit for Utility Trailers #MPG493. I…

Yes, with the Kuat Pivoting assembly part #PVD20B swung out all the way you would be able to fully swing open the rear door of your Sprinter. We had a customer with a similar Sprinter send us a picture where you can see that it would give the…

It sounds like your Big Tex trailer did not come with brakes. Based on this, to convert your trailer with no brakes, to adding electric brakes, on your Big Tex 35SA trailer, the first thing you need is a left and right brake kit. You could use the…

The Malone TopTier Load Bar Kit for Utility Trailers part #MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part…

To add a third brake light to a trailer is pretty simple, but does require an adapter to convert the signal. Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a…

I was able to go out to our warehouse and measure the height of the bend on the vertical support on the Malone TopTier Load Bar Kit for Utility Trailers #MPG493. The bend starts at 41.5", the middle of the bend is at 43.5" and it is…

We checked with Malone and the uprights of the Malone Top Tier Load Bar Kit #MPG493 are 16 gauge and the load bars are 14 gauge. The uprights are right at 1-1/2 inch by 1-1/2 inch.

I did contact Malone on your behalf and they confirmed you could use the Malone TopTier Load Bar Kit for Utility Trailers #MPG493 for a 5-1/2" foot trailer application. That said, they did have a specific note of caution that they stand behind…

If you have a utility trailer then we do offer a kit that allows you to mount crossbars onto them, the Malone Crossbar Conversion Kit for Standard Utility Trailer part #MPG475 which are then compatible with the Malone SeaWing Kayak Roof Rack part…

I may have a solution for you, however the Inno Truck Bed Cargo Rack #INRT101-79 referenced in your question is designed specifically for certain model truck beds, so it might not be the best fit for your utility trailer. For your trailer, I…

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…