CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel
(23 reviews)
Price: $30.53
In Stock
CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel
Item # CE26233-34GA
Our Price: $30.53
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (23)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE26233-34GA
- Bunks
- Bunk Bracket
- 6 Inch Tall
- 7 Inch Tall
- Galvanized Steel
- 5 Inch Wide
- CE Smith
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).
Features:
- Heavy-duty brackets let you mount a bunk board on your boat trailer
- Ideal for big bunk boards, such as 3x8 or 4x8
- Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board
- 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames
- Ensures alignment of the bunk board mounting holes
- Requires (2) 1/2" diameter U-bolts (sold separately) for installation
- 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation
- Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately)
- Galvanized steel resists rust and corrosion
- Suitable for saltwater exposure
- Made in the USA
Specs:
- Quantity: 2 brackets
- Overall dimensions:
- 85-Degree bracket dimensions: 6" tall x 5" wide
- 95-Degree bracket dimensions: 7" tall x 5" wide
- Distance between trailer mounting holes (center to center): 3-9/16"
- Distance between bunk board mounting holes (center to center): 1-1/16"
- Plate thickness: 1/4"
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
26233GA C. E. Smith Heavy-Duty, 6-Inch, Vertical, 85-Degree Bunk Board Bracket for Angled Crossmembers - Galvanized Steel
26234GA C. E. Smith Heavy-Duty, 7-Inch, Vertical, 95-Degree Bunk Board Bracket for Angled Crossmembers - Galvanized Steel
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel - CE26233-34GA
Average Customer Rating: 4.8 out of 5 stars (23 Customer Reviews)
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).by: Emile06/07/2023
Exactly what I needed for boat trailer repair fast checkout and shipping!
by: Mark O02/26/2020
Thanks so much for following up on this. The parts all fit as expected.
by: Richard09/02/2020
Used these brackets to install new doubled 2x8 vertical bunk supports. Brackets worked great. Easy to intall, extremely well made and far far stronger than what my 2,000-lbs 19 foot bayboat needs, which is a good feeling.
by: Brad11/01/2022
order received missing some pieces. Overall your company is good and mistakes happen but in future it would be good to expedite the parts to buyer instead of sending by slow boat.
Katrina B.
11/8/2022
We apologize for any inconvenience. When it comes to reshipping out missing or damaged items, we will always use the original shipping method you had purchased in your original order. You are always welcome to expedite your reshipment.
by: Andrew07/10/2019
Great service. The product I ordered was on backorder and the sales staff kept me informed of dates the product would be available. Thanks to Carol C., I am 100% satisfied with etrailer.
by: James 10/05/2019
We live in a coastal community in NC and I contacted two different Marine supply companies who claimed to have the bunk brackets I needed (angled)and they did not. One even claimed that there was no such thing. Well, I found your site and I'm happy to say you had them and I recieved them as ordered. Great service and I would recommend your business to my friends.
by: Michael 09/19/2020
I received my trailer lense not my brackets yet. I know there on their way . The lense turned out great.
by: Dan 05/01/2021
Great and solid Bunk brackets. Thank you for the quick delivery
by: Terry10/29/2018
fit and worked as advertised, extended the life of my boat trailer.
by: Andy B08/24/2017
Parts are exactly as described in add. Fast shipping, first time ordering from etrailer and will buy again for hard to find parts.
by: Frank05/16/2021
Heavy duty parts that worked for my app lication
by: drs04/04/2017
These brackets are a well thought out product and worked great!
by: Lyle 09/06/2022
Worked perfectly
by: Alan 02/06/2021
Did the job, and rigidly held up the bunks for my 2,200-lb wooden Lyman boat.
by: Frank09/08/2018
Nothing but good service from this company. Give them a try
by: Tim Barry02/05/2015
Great shipping speed, accurate descriptions. Will do business with again
by: Emilio 06/19/2021
Bracket for my boat came in great quality . and fast shipping.
by: Mike 05/27/2021
Excellent product and service!
by: Donald 10/07/2021
Good quality and fast delivery.
by: Troy 07/21/2023
by: Mitch 08/18/2022
by: David R07/07/2022
by: Christopher 12/03/2021
23
23
See what our Experts say about this CE Smith Boat Trailer Parts
- Brackets To Install Bunks on 2010 Karavan # KBE-1250-46 Boat TrailerWe do not have a way of determining which bunk brackets your Karavan trailer might use, but I may have a solution. If you have one already you could take photos and throughly measure it so we can look at our inventory of parts. In the mean time I have posted a link that shows many of our bunk brackets. I hope this is helpful.
view full answer... - Will CE Smith Galvanized Vertical Bunk Brackets Fit A 2003 Performance Trailer?The CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel # CE26233-34GA is a universal fit bracket, so as long as the dimensions fit, you will be able to use them for your 2003 Performance Trailer. Each bracket has a slight tilt to accommodate each side of the support. Mounting brackets stand 7 inches and about 6-3/4 inches tall depending on which bracket. The brackets are 5 inches wide and the mount holes are 3-9-/16 inches on center. The vertical holes...
view full answer... - Height from Base of CE Smith Heavy Duty, Vertical Bunk Brackets to Top Mounting HoleFrom the base of the the CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set # CE26233-34GA to the center of the top hole measures 6-1/8 inches.
view full answer... - U-Bolt Recommendation for the CE Smith Heavy Duty, Vertical Bunk Brackets # CE26233-34GAThe correct U-bolts to go along with the CE Smith Heavy Duty, Vertical Bunk Brackets # CE26233-34GA that you referenced are the CE Smith U-Bolts # CE15283GA-4.
view full answer... - U-Bolt Kit for Use with CE Smith Heavy Duty Vertical Bunk Brackets CE26233-34GAAlong with CE Smith Heavy Duty Vertical Bunk Brackets # CE26233-34GA you can use the u-bolt kit # CE15283GA-4 which is shown in the linked video.
view full answer... - Replacement Bunk Brackets for 13-Foot TrailerI have added a link to our page with each of our bunk brackets on it. Each of the brackets we have available are made of galvanized steel, such as # CE26233-34GA and # CE10100G, or zinc-plated steel, such as # DL21742, which are designed to resist corrosion and avoid rotting out.
view full answer... - How Do CE Smith Heavy Duty, Vertical Bunk Brackets CE26233-34GA Get Installed?You are correct. You will want to mount the longer 95 degree bracket of the CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set # CE26233-34GA on the lower section of the angled crossmember on your boat trailer, and the 85 degree bracket on the higher section of the crossmember. In addition you will need 1/2" diameter U-bolts to secure the brackets to the crossmember. If your crossmember is 3" x 3" then I recommend the CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16"...
view full answer... - Installing the CE Smith Heavy Duty Vertical Bunk Brackets When you install the CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel # CE26233-34GA the brackets will give you the appropriate bend, so you will drill mounting holes after marking and removing the bracket. When installing the bunk board once the mounts are secured, you can drill directly through the board as you stated.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark O.
3/8/2021
great no problems. Strong, Sturdy.