Replacing Hangers with 3 Mounting Holes on a 1990 Escort Boat Trailer
Question:
I have a 1990 escort boat trailer. I am trying to replace the suspension hangers but can not find them anywhere. Mine has 3 holes on the top. I can only find ones with 2 holes.
asked by: Renee
Expert Reply:
We do have a few hangers with 3 holes in the top, like parts # CE14016G and # CE14017G, but they are for 1-3/4" wide slipper springs. The former is 2-1/4" tall while the latter is 1-3/4" tall. If these match your current hangers then look no further! These are for bolt-on installations but all of our other hanger options are weld-on applications.
Otherwise you may be better off to choosing a different hanger from the linked selection and have it welded by a professional to your trailer. Just be sure that the hanger fits the same size leaf spring you have and that it is the appropriate height.
Products Referenced in This Question
CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 1-3/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 9/16 Inch Diameter
- 2-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE14017G Review
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer connector bracket
- Q&A: Installation Bolts for the CE Smith Hanger Bracket part # CE14017G
- Shop: Dexter Shackle Bolt for Double Eye Springs - 9/16" Diameter - 2-7/8" Long - Qty 1
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Q&A: Can Trailer Suspension Hangers be Bolted On
- Q&A: Recommended Slipper Spring and Hanger to Make Trailer Functional
- Q&A: What Is the Mounting Hole Diameter on the CE Smith Front Hanger Bracket # CE14016G
- Search Results: trfa916dlnz
- Video: Review of etrailer Trailer Leaf Spring Suspension - 3 Leaf Slipper Radius End 1500 lb Axle - e99SR
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Search Results: slipper spring bracket
- Search Results: off road suspension
- Article: Trailer Wiring Diagrams
- Search Results: slipper springs
- Search Results: 5 leaf slipper springs
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - 007-126-01
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE14016G Review
- Q&A: What is the Difference Between Double Eye Leaf Springs and Slipper Leaf Springs
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Video: Review of etrailer 4 Leaf Slipper Spring - e69SR
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Q&A: Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
- Search Results: spring mounting hardware
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)