Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
(31 reviews)
Price: $16.04
In Stock
Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
Item # 721585
Retail:$17.57
Our Price: $16.04
You Save: 9%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (31)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Suspension Parts - 721585
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 2 Inch
- 5-1/16 Inch Tall
- 9/16 Inch Diameter
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
Rear hanger works with trailer suspension systems that have 2" slipper springs.
Features:
- Configured as rear hanger
- Provides attachment point for leaf spring
- Hanger suspends spring from trailer frame by providing a resting place for the slipper end of the spring
- Designed for trailers with 3,500-lb to 9,000-lb axles
- Fits 2" wide slipper springs
- Works with 9/16" diameter bolt (sold separately)
Specs:
- Overall dimensions: 6" tall x 4" deep
- Inner width: 2-3/16"
- Height (from top of hanger to center of bolt hole): 5-1/16"
TSW 1585 Rear Hanger for 2" Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
Replaces 721585
Video of Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Trailer Suspension - Leaf Spring Suspension - 721585 Review
Today we're going to take a look at the 5-1/6" tall rear hanger for 2" wide slipper springs. This rear hanger will work with a trailer suspension system that has 2" wide slipper springs. This is configured as a rear hanger. This is designed to suspend the spring from the trailer frame by providing a resting place for the slipper end of the spring. It is designed to work with a 9/16 diameter bolt. We do sell that separate on our website. It's part number 166079.
Happened to pull that part number. There's your bolt and the nut that's included. Basically that would just go through the hole right down here, come through the other side and you put your nut on there and tighten it down. Now this is designed for trailers with 3,500-pound to 9,000-pound axles. The height they give on this for the rear hanger is 5-1/6". That measurement is from the center of the hole to the top.
If we take our ruler, go center to the top, that will get you your 5-1/6 measurement. That should do it for the review on the 5-1/6" tall rear hanger for 2" wide slipper springs.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole - 721585
Average Customer Rating: 4.7 out of 5 stars (30 Customer Reviews)
Rear hanger works with trailer suspension systems that have 2" slipper springs.by: S. Claude02/14/2024
Why are you asking? Apparently you don't read what was emailed to you, about me wanting to return this product. It was the wrong part. I felt ripped off by etrailer. But I found a wonderful wielder/engineer that modified it and and created the hanger part needed to make the repairs.
by: Jessie11/11/2022
Great product fits my need perfectly. The previous owner had bent the frame and bracket. I liked that this product has welded support in the center. With the extra support welded in the bracket and with me not planning on overloading the trailer as the previous owner had done to cause the damage, I feel this will be a permanent fix
by: Jared04/14/2023
Wish you would give measurements of the part in detail.
Jared
4/26/2023
Width, I bought the Bolt which was recomended by the website that said others who bought this bracket also bought this bolt. Well the bolt was definatly not for the bracket.
by: Jerry 06/27/2023
good product good follow through
by: Jerry 06/26/2023
excellent product
by: GAM04/24/2018
The welds on these hanger slipper rub rails were terrible. Low penetration and total loss of the shield gas on one long weld. Note the hanger in the picture and video on eTrailer web site has the weld on the wrong side of the rub rail; but my 2 came in with the weld on the correct side. I'll need to re-weld all however due to total lack of quality control. Shipping packing was terrible and half of these hangers were outside the box.
by: Bruce11/29/2018
Very fast shipping. Exactly what I needed. I have a old Redi Haul tilt bed that I use as a utility trailer. Need to move the axle back about a foot.
by: Andrew 10/24/2019
I ordered these hangers from parts store and they kept saying each day they aren't in yet. I waited almost two weeks still not here..!
I order from etrailer.com on Tues about 3;30 pm and the parts were at my front door by 1;00 pm on Thursday . Excellent service!
by: Marshall 02/12/2023
Great buying experience. Jaime was very helpful
by: Douglas 01/14/2023
Thanks did receive the hanger should work fine. Thanks
by: Greg P07/23/2013
This solved my problem with larger size tires. Heavy Duty.
by: Michael 08/07/2020
Item is as expected and heavy duty
by: Jesse 06/10/2023
by: Greg01/29/2019
Works as advertised
by: Hector 10/21/2023
by: Audencio05/23/2020
Very very nice thanks
by: Sara 06/22/2023
by: Richard 10/06/2022
by: Timothy 09/17/2022
by: Andrew 09/19/2022
by: Derek 02/06/2023
by: Jack 05/16/2024
by: Anthony 08/03/2021
by: Gere01/12/2023
by: Ray 12/23/2023
25
31
Show More Reviews
See what our Experts say about this etrailer Trailer Suspension Parts
- Hanger That Will Allow Hollywood Racks Sport Rider Bike Rack To Be Stored Vertically & Tight On WallI do have a possible solution for you as the engineers at Swagman said their X Mount Bike Carrier Storage Rack # S80940 is only capable of supporting a ball mount by the vertical hanger. You would have to position your Hollywood Racks Sport Rider SE Bike Rack # HLY84FR into the horizontal tube which you already identified would stick out to far. The Rear Hanger # 721585 would allow you to bolt it to your wall and is going to be more than strong enough to support the weight of your bike...
view full answer...
- Boat Trailer Slipper Spring InstallationIt sounds like you are using a bolt-on spring hanger like Redline # 721585 on your boat trailer. Trailer suspensions will never "behave" when they are unloaded the same way they do when carrying the weight they are designed for. If the 1/2-inch of play you are referring to is in the bolt on hanger, then you will want to secure it by welding. If the play is in the end of the slipper spring then this may not be an issue. As long as your springs and hangers are of the same width and appropriate...
view full answer... - Distance from Top of Mounting Bracket Down to Spring Bracket of Slipper Spring HangerThe distance from the top of the mounting surface of the Rear Hanger for 2" Wide Slipper Springs # 721585 down to bracket that the spring would rest on is 2-3/8 inches.
view full answer...
- Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SEThe front hangers in kit # APS6SE are # 721584. They measure 3-3/4 inches from the top to the center of the mounting hole. The hole is 9/16 inches in diameter. The holes that are in the top are not for bolting the hanger. They are there to mount the hangers using button welds. Very few hangers are designed to be bolted on. The rear hangers in the kit are # 721585. They measure 5-1/6 inches tall from the top to the center of the 9/16 inch diameter hole. It also features the 2 holes for...
view full answer...
- Which 2-inch Hanger is Used for the Rear hanger Slipper Springs?On 3,500 to 9,000 lb axles with 2-inch wide slipper springs, the Hanger for 2" Slipper Spring 5-1/16" Tall, part # 721585, can be used as the front, center and rear hangers.
view full answer... - Availability of Rear Hanger for 2 inch Wide Slipper Spring and Complete Hanger KitFor a rear hanger for a 2 inch wide slipper spring we have the part # 721585 which is 5-1/16 inches tall. Then for a complete kit like you mentioned needing you'd want the part # APT6SE which comes with a 12 inch equalizer.
view full answer... - Are there Bolt On Spring Hangers?Sorry about your troubles but we do have a some spring hangers that can be attached with 9/16" bolts. I have listed a few of them below: Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only item # 93003-3X Rear Hanger for 2" Wide Slipper Springs - 5-1/16" Tall - 9/16" Bolt Hole item # 721585 Front Hanger for 2" Wide Slipper Springs - 3-9/16" Tall - 9/16" Bolt Hole item # 721584 Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt...
view full answer... - How To Measure For Replacement Rear Hanger for 2019 Jayco Pinnacle Fifth WheelWe have several options and I think we can locate what you need with a little more information provided. Unfortunately we not have the abilty to pull OEM build sheets to identify what part numbers were used to build a Jayco Pinnacle. But we have options such as the Rear Hanger for 2" Wide Slipper Springs, # 30-28 that is 5-1/4" Tall with a 5/16" bolt hole and if you let me know the needed measurements and what size springs you have we can locate a solution. Please note the attached image.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Mike S
Expert Research:
DeAnne T
Expert Research:
Jameson C
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
4/15/2023
What measurement would have made it easier to know if this hanger would work for you?