Replacement Bevel Gear Kit for a Fulton Swivel Trailer Jack

Question

Question:

I would like to purchase a Replacement Bevel Gear Kit for a Fulton sidewind swing jack but am uncertain which kit is correct. The looks similar to the TJ12000101 model. The jack body has a 2inch outside dia. round tube 15 1/2inch long. The pull pin is 3/8inch dia. Thanks for your help.

asked by: Jim

0

Expert Reply:

We have the Fulton Replacement Bevel Gear Kit, part # F0933302S00. This will fit Fulton marine and RV jacks up to an 800-lb weight capacity. The Fulton jack model numbers it fits is TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100 and others.

We no longer carry the gears that will fit the TJ1055, TJ1057, TJ1222, TJ1255, TJD125, TJ122F, XP15/L/W/WC and XPF15L. These gears were mainly for 1,500 to 2,500 pound jacks.

I would go by weight capacity and, if your jack has a sticker or cap with the serial number, go by that as well.

expert reply by: Michael H

0

Answer 1

Thank you for providing the photo of your Fulton jack handle as well as the clear description of the compatibility issue you've encountered with the jack repair kit you purchased, part #F0933302S00. My contact at Fulton was able to confirm…

view full answer...

Answer 2

It is likely based on the capacity of the jack that you will need bevel gear kit, #F0933302S00, that you have referenced. You may be able to find more information about the jack by looking at the cap or for numbers near the bottom of the…

view full answer...

Answer 3

I pulled the Fulton Bevel Gear Kit, #F0933302S00, from the warehouse and measured the bevel gears for you. The gears are 1-1/8 inches outer diameter x 15/32 inch thick with a 1/2 inch inner diameter. The groove pin is 3/16 of an inch in diameter x 1…

view full answer...

Answer 4

The Replacement Bevel Gear Kit #F0933306S00 is for applications. The #F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Since your jack is as old as it is and you…

view full answer...

Answer 5

Installing the #F0933302S00 gears is fairly easy but without proper guidance I can see how it would be pretty difficult, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin. Remove the pin.…

view full answer...

Answer 6

The Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part #MJ-1000B-GR have a 1/2" inner diameter and 1-1/8" outer diameter.

view full answer...

Answer 7

Could you possibly get me the brand of landing gear that you have? It's nearly impossible to pick out the gear kit based on dimensions of the bevels but with more info that can help narrow down the search.

view full answer...

Answer 8

I spoke with my contact at Fulton about the issue you are having with your 1500 pound Magnum trailer jack. His first thought was that the tongue weight could be too high and this could make it difficult to get the wheel to rotate or pivot. It is also…

view full answer...

Answer 9

We do not offer a gear kit specifically for the Reese 74410 trailer jack but there is a good possibility that the Replacement Bevel Gear Kit for Fulton Jacks, #F0933302S00, will work for you. I have included a picture which lists the dimensions of…

view full answer...

Answer 10

Based on the 1-1/8" diameter x 1/2" thick measurements you provided of your current gears, the Replacement Fulton Gear Kit #F0933302S00 would be the correct gear kit for your older Fulton jack as it includes two bevel gears that are…

view full answer...

Answer 11

There are one Fulton Jack repair kit available that could potentially work for you. You will need to get some measurements from the gears in your jack in order to know which one would work for you. I attached a picture that has all of the dimensions…

view full answer...

Answer 12

It is not possible to identify the correct replacement gear set for your Fulton tongue jack based just on your description. My technical contact at Fulton confirmed you will need to find the jack's part number, usually stamped into the outer…

view full answer...

Replacement Bevel Gear Kit for a Fulton Swivel Trailer Jack

Product Page this Question was Asked From

Continue Researching