Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".
Features:
Specs:
Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Average Customer Rating: 4.7 out of 5 stars (544 Customer Reviews)
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".Perfect replacement, works great, excellent shipping time and service. Just wish I had got the electric motor that goes with the legs.
Ordered this from etrailer instead of other sites as I knew the shipping would be faster. Sure enough I got the item in 4 days on Thursday and Installed it on Sunday. Very quick and easy. Took longer to get all my tools and set up items together than the actual work. The item was a exact fit with installation being feeding the legs through the holes in the floor down from the inside and installing the 4 clamping bolts to hold them in, the gear box on the lead leg and the cross bar and motor. Now it purrs like a kitten when activated instead of clanking and creaking and blowing fuses. Actual install time was probably 1.5 hours taking my time and injecting extra grease into the gears and lead screw. These replacement units have a grease fitting for both which is great and should allow them to last forever! Being a safety freak I used a 3 ton jack with a 4X6 placed long ways to catch the I beams under the trailer then placed 3 ton car jacks under the frame also and for extra safety backed my truck bed under the tongue for extra security while I worked. The price was crazy great, the fit was excellent and the shipping was fast as usual. less money in parts and 2 hours of work probably easily saved me a grand over taking it to a RV repair shop! Thanks etrailer. Saved me again!
Well it happened while out enjoying the AZ mints. My landing gear quit working. Returned home in time, to rebuild my landing gear. I got on line, checked etrailer.com, they had the landing gear that fits 90% of all 5th wheels. I purchased the set, arrived a day early, all the parts were complete in the box. It was a perfect fit, so easy to install. I greased all the gears, even the crank box gears, painted the cross bar.
As everything I order from eTrailer the landing gear worked perfectly.
Support was great at telling me exactly what I needed for my model of 5th wheel. Product arrived in a couple of days. The landing gear kit came with all parts necessary and fit perfectly.
DO NOT get thrown by the low price of this unit. The RVLG 8000 works great. I have a 40’ 5th wheel and it was a very simple and direct replacment of the old one. The ordering was very easy and was received within a couple days. The whole replacement only took me (by myself) about 2 hours. This replaced the stock unit which was rated for 5500lbs lift this one is 8000lbs lift which worked much better. This unit also has grease fittings so you can easily keep them lubed. I also took the gear box apart and drilled and taped a grease fitting into it.
Very good product I highly recommend it and etrailer.
The jacks are of excellent quality. They arrived on time and in good shape. I was a little disappointed that the square drive shaft was unpainted, but that is not a deal breaker. A can of spray paint will take care of that.
Douglas
7/31/2023
Jacks are working great!!
Box was beat up and missing a few things. Called and told them about the missing items. They shipped me the parts no questions asked. Definitely will buy from them again
I called to order a new landing gear set for my 2004 Cougar by Keystone fifth wheel camper. The old landing gear had stripped the bevel gears, with this new gear set I was able to remove my old gear and install the new landing gear. The install was easy and was done within 30 minutes, I also reinstalled y old motor and it bolted right up to the new gearbox.
My call to etrailer was a great customer service experience and I will be looking into my future purchases from them. I have also already recommended etrailer to my friends for their purchase needs. I give them 5 out of 5 stars!!!
These units were spot on
Easy install and a nice upgrade
Always etrailer comes though
I will refer any and all my friends here
Replaced a pair of Atwood's with these. These were about 3" longer than the Atwood's and weld stops were in different places but I just welded them in. They have nice big feet and are very heavy. Atwood electric motor bolted right in. Overall very happy with the landing gear, as it was cheaper than just the replacement driver leg Atwood that was broke.
After my drive leg went out on my 5th wheel (bent acme screw and stripped worm gear), My choice was to either purchase (a) an OEM Lippert part that was rated for 5000 lbs/pair or (b) purchase this entire set rated at 8000 lbs/pair for $100 less and get two brand new legs, a new drive shaft, new gear box, and new feet for the legs. I did not even know about this option until I spoke with two customer service agents and this was recommended as a less-expensive upgrade.
The install was easy with a few jacks and jack stands, so thanks Jamie and Amy for the help locating and purchasing the correct replacement parts!
Failed 18 months after purchase, only comes with a 1 year warranty. The landing gear jammed up, it will no longer go up or down. I have greased the fittings but under ANY load they do not work.
Katrina B.
6/27/2022
It is unfortunate that your landing gear has jammed within such a short amount of time. I have sent your information over to our customer service department for them to better assist you.
Perfect fit and works perfectly
Worked perfectly to replace my damaged jacks on 2021 Keystone 31MB. Thanks etrailer for the speedy delivery and great installation instructions.
Better than the OEM jacks. Super price and excellent service with fast delivery. The jacks have 2 grease fittings on each jack. Something the OEM jacks didn’t have.
Excellent fit,fastest delivery ever. The Rv repair shop wanted $140 an hr plus $405 for their landing gear ... oh plus tow because I couldn't get it hooked to truck....
So I saved over $600 easily, these legs are better quality and less expensive. I had them installed in2 hrs
Perfect fit and an easy install, my gears were messed up and blowing fuses, this fixed my problem.
Shipped quickly. It was a perfect match for my failed landing gear. It took less than 3 hours to install. etrailer's price was excellent. Very happy with this purchase
Just what I ordered. I was hoping for instructions for the correct install order for the cross member, spacer and reduction gear. Would seem fairly simple until you try to get it all to fit together. Thank you YouTube!!
Chris
1/19/2023
A year in and one full season of use I am still very happy with the jacks landing gear!
Super easy to install. Had to replace non motor side, so figured I would just replace both with a new set.
The drive shaft was bent significantly. I don't think it could have happened normally during shipping, as it took quite a strong press to straighten it sufficiently. Also, the crossover bar was too short for my Hitchhiker II, so used my old one. Also the gearbox was not compatible with my Venture motor so had to use the old one.
Fast response super quick Delivery, should slide right into place….
awesome products, awesome prices and awesome service
Friendly customer service, shipping was extremely fast. Product was exactly what I needed installed and worked fine
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bradley R.
2/2/2020
The landing gear has worked flawlessly for a year. The only recommendation I have is that the zerk fitting be moved down an inch or so. They are useless because the square tube that goes between the two to activate the slave side is in the way. I had to remove the zerks so they wouldnt rub. Not a deal breaker. The Jacks are great and well built.