bing tracking image
  1. Camper Jacks
  2. etrailer
  3. Fifth Wheel Camper
  4. Leveling Jacks
  5. Stabilizer Jacks
  6. Landing Gear
  7. Sidewind Jack
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

Item # RVLG-8HDL
Our Price: $218.45
Camper Jacks
Shipping Weight: 64 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4". 1-800-940-8924 to order etrailer camper jacks part number RVLG-8HDL or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (539)
  • Q & A (0)
  • Photos
  • Used (2)

etrailer Camper Jacks - RVLG-8HDL

  • Fifth Wheel Camper
  • Leveling Jacks
  • Stabilizer Jacks
  • Landing Gear
  • Sidewind Jack
  • 7001 - 8000 lbs
  • 2 Jacks
  • 36 Inch Lift
  • etrailer
  • Weld-On
  • Steel

Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".


Features:

  • Landing gear set lets you raise and lower your trailer
    • Ideal for 5th-wheel trailers and RVs
  • Connecting rod allows for simple, tandem operation
  • Footplates offer stability and prevent sinking
  • Durable, black powder coated outer tubes and zinc-finished inner tubes provide excellent corrosion resistance
  • Manual hand crank included
    • 12V DC motor (LC142178 - sold separately) is available


Specs:

  • Leg height:
    • Retracted: 32-3/4"
    • Extended: 53-1/4"
  • Total lift: 36-1/2"
    • Screw travel: 20-1/2"
    • Drop leg travel: 16"
  • Combined weight capacity: 8,000 lbs
  • Gear ratio 3:1
  • Distance between legs:
    • 44-1/2" When positioned as close together as possible
    • 72" When positioned as far apart as possible
  • Footplate dimensions: 8" long x 6-1/8" wide
  • Adjustment hole spacing on drop leg: 1" from center of hole to center of hole
  • Distance from bottom of upper weld stop to top of lower weld stop: 15-1/2"
  • Distance from top of upper weld stop to bottom of lower weld stop: 17-1/2"
  • 1-Year warranty


Dimension of Landing Gear Set

Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



RVLG-8000 Ram Landing Gear Set - 20-1/2" Screw Travel - 8,000 lbs

RVLG-HDL Replacement Manual Crank Handle for Ram 5th Wheel Landing Gear

Installation Details RVLG-8HDL Installation instructions



Customer Satisfaction Score:


Customer Reviews

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs - RVLG-8HDL

Average Customer Rating:  4.7 out of 5 stars   (537 Customer Reviews)

Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".

by: 10/20/2022

The product itself was great. It fit right in to the brackets from our old landing gear. We were able to use our existing motor as a cross fit with this gear. The gear box was even better than Lipperts as it was not plastic.
The only issue we had with this was shipping. We ordered the part same day as our water pump because we were told it was in stock. Low and behold they changed ship date numerous times, with the excuse it was not easy to pick. Anyhow, two weeks later we finally got the part we ordered.

Tera

10/21/2023

So far so good, have not had any issues with this landing gear. It has proved to be equal to the Lippert system that broke on us.

Etrailer Expert

Mike L.

11/9/2023

@Tera We're happy to hear your # RVLG-8HDL replacement landing gear is still working well for you!


by:

I have a 2000 komfort 26FS. It has original landing gear that was made by Atwood.Parts to repair are apparently no longer available. Did alot of research and this kit seemed to be a good replacement. It is a exact replacement. Took some time to get it installed as my 5th wheel has a wall and frame right next to landing gear. Original motor bolted up with replacement of original screws which were half inch to short. Four days to get delivered to Oregon. I would have given a five star review but I was missing square tubing that runs from gear box to other leg. Tubing is clearly pictured in discription photos.

Bud

8/29/2023

Its been a year since I installed the landing gear and could not be happier. One of the best repairs Ive made with quality parts. Thank you etrailer.com.



by:

The fifth star is for the fantastic etrailer Customer Service Team! They are always helpful with questions and guidance. I have a 1998 Terry 5th wheel, and this gear was practically a direct fit. The gearbox mounts either horizontally or vertically, the legs feel heavy duty and appear powder coated; they function smoothly. The feet, handle, and clips are all quality pieces. Sadly, the telescopic cross bar between the legs wasn’t coated and mine was rusty. Also, the gearbox was loose, bouncing around with the heavy metal parts in the manufacturer’s box, chipping the gearbox. All in all, I am very happy with the functionality/price. Plus, now when I get a little older, I have the option of adding the electric motor. Again, thx to Customer Service.

Etrailer Expert

Rebecca N.

7/7/2023

It looks great installed on the 5th wheel. It does sound like it was knocked around a little. I will have our Customer Service team reach out. Using a little Rustoleum on the gear box will help.



by:

Landing gear fit perfect on my 2011 Rockwood fifth wheel. I was even able to use my original motor.

Richard P.

10/15/2023

Flawlessly. Landing gear was better then original but these came with grease fittings where old ones did not have them. No problems with installation. We used RV this year for 8 weeks with no problems.

Etrailer Expert

Andrew N.

11/7/2023

@RichardP That's great to hear!


by:

This landing gear worked well with my 5th wheel trailer. I had to do a little bit of grinding to get them to set correctly but nothing too bad. Shipping was very fast and I spoke with 3 different people to get info and everyone of them were really nice and helpful. Will be definitely ordering from here again!

Michael

2/14/2024

Product is still holding up well after a year. I only move my trailer about once a year.



by:

This was my first time installing a replacement pair of jacks on a 30' Excel gooseneck trailer, it was intuitive and straight forward. Was unable to figure out how to mount up my existing Atwood electric motor to operate this gear head but will deal with that after a job I need to use this for.



by:

Seems to be good quality, perfect replacement for the 30+ year old Attwood landing gear that wore out. Installation was fairly quick and easy, with two small issues. First, had to sand down a plastic spacer between gear box and drive bar for bolt to fit. Second, I have to replace the screws that hold motor to gear box, threads on new gear box start 1/4 in back making old screws too short.
I was impressed that the jacks have two grease zerks and came well greased.



by:

Very fast shipping. Packaged excellent. I put them in with no problem at all. I had to flip the grease zerks around because my lead/follow legs are reverse (motor on the opposite side). Easy to do.



by:

First I normally don’t write reviews. Customer service deserves 10 stars great information and product knowledge. I am very pleased with quality of product. Installed just like videos of course every camper is different but all information was helpful. Quality of product is a lot better than original factory set. Plus was my motor bolted right up like customer service said.
Would recommend
2009 Crossroad Cruiser

Ronald C.

10/26/2023

No problem at all



by:

Worked great! Actually used them to adjust solar panels.



by:

All around great experience, new jacks fit perfect! with a great price and great quality etrailer.com will be my go to choice



by:

8000 lb landing gear set perfect, came in time with all parts Thanks to Lori great company



by:

This product is exactly what I needed to replace the original installed landing gear on my 2010 Outback fifth wheel. The product was delivered in an unbelievable time frame and in excellent condition keeping in mind it was heavy and cumbersome. The service was outstanding and worthy of praise to any campers who may be looking for parts to any trailer on the market. I will certainly express my pleasure with your service and products to anyone that may ask or need help.



by:

Appears to be good quality. Fit in the existing mounts. Drop leg is a bonus over what was previous.



by:

Perfect fit on my 2001 coachmen catalina 10 minutes and done. And the price is very good A plus thank's

Michael

12/3/2022

Outstanding, after one year etrailer Camper jacks are still working perfectly on my 2001 coachmen Catalina no problem at all.



by:

Product was packaged very well. Installation was a breeze, all parts were there!



by:

These guys are awesome to fill the void, bridge every gap. If it wasn't for etrailer, I don't know what I would do, except keep on praying to God, ask for a better way. These guys AND GALS ARE GREAT!

Corinne

10/7/2023

These jacks, I have ordered 3 times over &amp they work out great thank you, no problem with them ever.

Etrailer Expert

Mike L.

10/23/2023

@Corinne We're glad your # RVLG-8HDL RV landing gear is working well for you!


by:

Since I was told this was made in China, I was afraid the quality of the metal would be poor, but they are heavy and sturdy.

For the price I highly recommend this landing gear set.



by:

Replacement jacks work better than the original legs. Highly recommend these legs. Was easy to install



by:

Installation went smooth, hardest part was troubleshooting the old landing gear. This was an exact replacement for our O.E.M. landing gear which had stripped out the bolt. Great price, fast shipping, very satisfied.



by:

Shorter than original not as heavy duty as oem the small bolts that connect both jacks are really cheap. With that being said it works after some grinding it fits. Time will tell on the over all durability



by:

This landing gear worked out perfectly!

Ross

9/2/2023

This product is still working great, and I would definitely recommend it!



by:

Had to do some modification, cutting and welding but am very happy. The issue was the fact that my fifth wheel is over 40 years old



by:

I appreciate the quick service. Ordered on Thursday got it on Monday and installed it on Tuesday. The landing gear was easy to install and works great.



by:

You saved a camping trip by getting the parts to me a day earlier than you said so great job, I was able to do the repairs in time to go camping tomorrow!!! The parts were the exact replacements and works great now! Thanks again


25
536
Show More Reviews

See what our Experts say about this etrailer Camper Jacks

  • Replacement Crank Handle for Ram 5th Wheel Landing Gear Compatibility With 2007 Fleetwood Nitrous TT
    I don't have any way of determining if the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL will work with your 2007 Fleetwood Nitrous Hyperlite TT Toy Hauler or not, unfortunately. The Replacement Crank Handle # RVLG-HDL is designed to be a replacement for Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-8HDL. The part where # RVLG-HDL connects to the landing gear is 1/2" while the outer sleeve has a diameter of 3/4". I recommend...
    view full answer...
  • Outside Leg Dimensions of etrailer.com Landing Gear for 1995 Skyline Layton Fifth Wheel
    The Landing Gear Set w/ Handle - 20-1/2" Travel - 8,000 lbs # RVLG-8HDL has an outer tube width of 2-1/2 inches. As long as the weld stop locations shown in the attached photo work, you will have no issues making this a direct replacement and reusing your current brackets.
    view full answer...
    Image 1 for Image 2 for
  • Determining The Correct Replacement Landing Gears For A 2012 Genesis Supreme Vortex
    There unfortunately isn't a guide to tell us the weld stop spacing in your 2012 Genesis Supreme Vortex so you'll first want to measure so we can see if there's a compatible replacement without have to cut off your current mounting brackets and and weld on new ones. The Landing Gear Set w/ Handle # RVLG-8HDL you were looking at has a 15-1/2" distance from bottom of upper weld stop to top of lower weld stop and a 17-1/2" distance from top of upper weld stop to bottom of lower weld stop. Once...
    view full answer...
    Image 1 for
  • Replacement for Atwood MPD 71125 5th Wheel Landing on 5th Wheel Camper
    Since Atwood is no longer in the landing gear business it is basically impossible (unfortunately) to get just a replacement leg. The part number that you gave me actually is a document that shows the various parts for Atwood landing gear, but nobody has information as to what those replacement parts are the equivalent of. Because of this I recommend replacing the landing gear on your 5th wheel trailer. This gives you some peace of mind that you won't have to replace any parts in the near...
    view full answer...
  • Can Trailer Landing Gear Legs be Welded Directly to Frame
    Trailer landing gear sets like the etrailer.com # RVLG-8HDL that you referenced are designed to bolt onto brackets that are welded to the frame. In terms of function or capacity there is no particular reason you couldn't just weld the legs directly to the frame instead but I don't recommend doing this for a couple of reasons. First the actual install process is going to be a lot more in depth than just bolting to existing brackets or even welding on new ones for the legs. You will need...
    view full answer...
  • Landing Gear Replacement for 2021 Forest River Wolf Pack 365 Pack 16
    Yes, based on the distance between the welded on brackets of your camper the etrailer landing gear set part # RVLG-8HDL will fit on your 2021 Forest River Cherokee Wolf Pack. The motor normally used with this kit is the part # LC142178. If the motor you have looks like this (most likely it will) then it would work with this.
    view full answer...
  • Bracket Dimensions of the etrailer RV Landing Gear System # RVLG-8HDL
    Good news! I was able to go out to the warehouse and measure the etrailer landing gear # RVLG-8HDL for you. I found that the distance between the weld stops from the outside to outside is 17-1/2 inches and from the inside to the inside of the weld stops is 15-1/2 inches. I have linked a dimensional diagram to this page for you to better see where I measured. I have linked this product to this page for your convenience.
    view full answer...
    Image 1 for
  • What Is the Warranty of the Landing Gear Set with Handle RVLG-8HDL
    The Landing Gear Set w/ Handle part # RVLG-8HDL have a one year warranty and they are designed to replace existing landing gear legs with 15-1/2" between the weld stops (inside to inside). I suspect this is what you have as it's an industry standard measurement therefore they should fit a 2006 Mckenzie Dune Chaser Toy Hauler Fifth Wheel Series M-38FKS just fine.
    view full answer...
  • Will the Landing Gear part # RVLG-8HDL Fit my 2007 Keystone Laredo
    The Landing Gear Set w/ Handle part # RVLG-8HDL is a very common replacement. The biggest thing to check is the distance from the outside to the outside of the weld stops or inside to inside of the attachment straps to ensure that it measures 17.5". If it does this will be a good fit for you. This kit does come with the gear box attached but it can easily be removed if you choose to attach your own. If you have different measurements pleae get the model number off of the landing gear and...
    view full answer...
  • Recommended Replacement Landing Gear Set For A 2003 Jayco Eagle Fifth Wheel
    The Landing Gear Set w/ Handle # RVLG-8HDL that you're interested in sounds like to be a perfect match for you! This landing gear set has an overall width of 6-1/8" including the foot pad, and the legs itself measure 2-1/2" wide like your current landing gear. Additionally, this landing gear has a combined weight capacity of 8,000-lbs, and provides a total leg travel of 36-1/2". Attached is a diagram depicting the above measurements for you to check out, as well as a product review video.
    view full answer...
    Image 1 for Image 2 for
  • How To Find Correct Replacement Landing Gear Legs for a 2013 Jayco Eagle 26.5HT Fifth Wheel
    In order to find out what the correct replacement landing gear set would be for a 2013 Jayco Eagle 26.5HT Fifth Wheel, you'll need to measure your existing legs, the weld stop spacing that is. If it's 15-1/2" inside to inside and 17-1/2" outside to outside, which is a standard, then you can use the Landing Gear Set with Handle part # RVLG-8HDL. If you have a different measurement please just let me know what that is, otherwise you can browse our selection below.
    view full answer...
  • How to Determine Replacement Landing Gear for 2007 Weekend Warrior LE3305
    To find the correct landing gear for your 2007 Weekend Warrior LE3305 you'll only need to know the distance between the weld stops that your current landing gear is attached to. From there you can choose the lift and weight capacity of your landing gear and if you want a manual or electric motor. Standard measurements for weld stops are 15-1/2 inches from inside to inside and 17-1/2 inches from outside to outside. Those dimensions are the same used on top sellers such as the Landing Gear...
    view full answer...
  • How To Confirm Fit of the Landing Gear Set with Handle part # RVLG-8HDL
    The Landing Gear Set w/ Handle part # RVLG-8HDL will work on any trailer with the industry standard spacing of 15-1/2" when measuring between the weld stops on the landing gear leg. I don't have any sort of database to reference old part numbers unfortunately. In regards to motor compatibility, most of these use a standard design so this should not be a problem.
    view full answer...
  • How To Determine The Correct Landing Gear For A 2007 Sportsmen Sportster Toy Hauler 5th Wheel
    To determine the correct landing gear for your 2007 Sportsmen Sportster Toy Hauler 5th Wheel you'll want to measure the weld stops on your current landing gear and find a matching set. You can technically choose one with different weld stop measurements but would then have to do some welding so it's best to match what you already have. The Landing Gear Set w/ Handle # RVLG-8HDL you were looking at has a 15-1/2" distance from bottom of upper weld stop to top of lower weld stop and a 17-1/2"...
    view full answer...
    Image 1 for
  • How To Determine the Correct Replacement Landing Gear For A 2010 Dutchman Denali 260RKX 5th Wheel
    To find the correct landing gear for your 2010 Dutchman Denali 260RKX fifth wheel you'll need to know the distance between the weld stops that your current landing gear is attached to. If we can find a matching measurement then you can easily swap out the legs without having to cut off the old brackets and weld on new ones. From there you just need to choose the correct capacity and if you want a manual or electric motor. Standard measurements for weld stops are 15-1/2 inches from inside...
    view full answer...
    Image 1 for
  • How to Know if Landing Gear Set # RVLG-8HDL Will Fit 2001 Sunnybrook 31BWFS
    In order to pick out a direct replacement for the landing gear on your 2001 sunnybrook 31bwfs we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Tandem Landing Gear Set # RVLG-8HDL. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Set for Forest River Cardinal Fifth Wheel
    I have some really great options for complete landing gear sets to use on a Forest River Cardinal Fifth Wheel, the Landing Gear Set with Handle part # RVLG-8HDL for example is super cost effective and it comes with everything you need. In regards to fit, it should work but I do recommend checking that the weld stops on your existing landing gear legs are 15-1/2' apart inside to inside.
    view full answer...
  • Compatibility of Replacement Crank Handle
    The Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear # RVLG-HDL is designed to be a replacement handle for Landing Gear Set # RVLG-8HDL. Replacement handles attach to landing gear in a number of ways so they need to be matched with their manufacturer. For example, # LC119226 is a replacement manual crank for Lippert Components landing gear. Once you take a look at the manufacturer of your landing gear, just go to the link I've attached which has each of our available...
    view full answer...
  • Difference Between Landing Gear Sets
    The only difference between the two landing gear sets you referenced is that Landing Gear # RVLG-8HDL comes with a handle and # RVLG-8000 does not. Apart from that they are the exact same landing gear sets, with 20-1/2" of travel, an 8,000 lb weight capacity, 44-1/2" between the legs when they are as close as possible and 72" when as far apart as possible. This landing gear is designed to fit the standard weld stop measurements of 15-1/2" inside to inside of weld stops and 17-1/2" outside...
    view full answer...
  • What is the Difference Between etrailer 8,000 lb Landing Gear Sets
    You are right on the money with the differences between the two etrailer landing gear sets; the only difference is that one comes with the manual hand crank (handle) and the other does not: - Manual Hand Crank: Landing Gear Set with Handle - 36-1/2" Lift - 8,000 lbs # RVLG-8HDL - Without Manual Hand Crank: Landing Gear Set - 36-1/2" Lift - 8,000 lbs # RVLG-8000 Both will have a 1-year warranty as they are the same part. I have added a link to a video review for you to check out as well.
    view full answer...
  • Difference Between 8,000 lb Landing Gear RVLG-8HDL & RVLG-8000
    The only difference between these two 8,000 lb landing gear sets - other than price - is that one comes with the crank handle and the other does not come with the handle. - Comes With Crank Handle: Landing Gear Set w/ Handle # RVLG-8HDL - Comes Without Crank Handle: Landing Gear Set # RVLG-8000 Apart from that, these are 100 percent the same landing gear.
    view full answer...
  • Can The Gearbox For The etrailer Landing Gear Set Be Mounted Horizontally
    The gearbox # RVLG-RDBOX for the Landing Gear Set w/ Handle # RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place match up perfectly for both positions (pictured below).
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Dimensions of etrailer Brand RVLG-8HDL and RVLG-8000 Replacement 5th Wheel Landing Gear
    The only difference between the # RVLG-8HDL and the # RVLG-8000 is that the # RVLG-8HDL includes the manual crank handle, while the # RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of 53-1/4 inches The tabs for the mounting straps measure 17-1/2 inches from the top of the top most tab to the underside of the lower tab. From the underside of the top tab to the top of the lower tab is 15-1/2 inches. I've shown these dimensions...
    view full answer...
    Image 1 for
  • Difference Between etrailer Landing Gear Jacks RVLG-8HDL and RVLG-8000
    The difference is that the # RVLG-8000 does not come with a handle and the # RVLG-8HDL does come with one. Aside from that it's the exact same jacks. We don't offer replacement legs for them so if you need new legs best toption is the # RVLG-8HDL which will give you a new gear box as well.
    view full answer...


< Previous
123. . .5



Do you have a question about this Camper Jack?


Used Items Available
Used Picture for Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
Used Picture for Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

Condition: Surface Scratches

Notes: Item has cosmetic scratches and dings.

Our Price: $208.11
Add to Cart
Secure Checkout
Used Picture for Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

Condition: Installed

Notes: Item has been installed/test fit and has cosmetic dings/scratches.

Our Price: $217.99
Add to Cart
Secure Checkout

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Randy B
Installed by:
Randy B
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Michael B
Updated by:
Michael B
Employee Amanda M
Written by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.