Fulton Jack Repair Kit Availability

Question

Question:

I have a Fulton trailer jack on Shorelandr Profile 2000. The top gear broken, handle spins. the mount has TWO center bolts, I can not find similar on your site is it possible there is replacement you can sugeest. I know its a Fulton jack, however I can not model #

asked by: CPAV

0

Expert Reply:

There are one Fulton Jack repair kit available that could potentially work for you. You will need to get some measurements from the gears in your jack in order to know which one would work for you.

I attached a picture that has all of the dimensions for the Replacement Bevel Gear Kit # F0933302S00. This kit is for 800-1,200 lb jacks.

The other kit for 1,500-2,500 lb jacks is no longer available.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Bevel Gear Kit #F0933306S00 is for applications. The #F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Since your jack is as old as it is and…

view full answer...

Answer 2

It is likely based on the capacity of the jack that you will need bevel gear kit, #F0933302S00, that you have referenced. You may be able to find more information about the jack by looking at the cap or for numbers near the bottom of the…

view full answer...

Answer 3

I pulled the Fulton Bevel Gear Kit, #F0933302S00, from the warehouse and measured the bevel gears for you. The gears are 1-1/8 inches outer diameter x 15/32 inch thick with a 1/2 inch inner diameter. The groove pin is 3/16 of an inch in diameter x…

view full answer...

Answer 4

Installing the #F0933302S00 gears is fairly easy but without proper guidance I can see how it would be pretty difficult, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin. Remove the pin.…

view full answer...

Answer 5

The Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part #MJ-1000B-GR have a 1/2&quot; inner diameter and 1-1/8&quot; outer diameter.

view full answer...

Answer 6

We do not offer a gear kit specifically for the Reese 74410 trailer jack but there is a good possibility that the Replacement Bevel Gear Kit for Fulton Jacks, #F0933302S00, will work for you. I have included a picture which lists the dimensions of…

view full answer...

Answer 7

I spoke with my contact at Fulton about the issue you are having with your 1500 pound Magnum trailer jack. His first thought was that the tongue weight could be too high and this could make it difficult to get the wheel to rotate or pivot. It is…

view full answer...

Answer 8

Based on the 1-1/8" diameter x 1/2" thick measurements you provided of your current gears, the Replacement Fulton Gear Kit #F0933302S00 would be the correct gear kit for your older Fulton jack as it includes two bevel gears that…

view full answer...

Answer 9

Thank you for providing the photo of your Fulton jack handle as well as the clear description of the compatibility issue you've encountered with the jack repair kit you purchased, part #F0933302S00. My contact at Fulton was able to confirm…

view full answer...

Answer 10

Could you possibly get me the brand of landing gear that you have? It's nearly impossible to pick out the gear kit based on dimensions of the bevels but with more info that can help narrow down the search.

view full answer...

Answer 11

We do not have a rebuild kit for the Pro Series jack it sounds like you have part #PSEJ10000101 so best option would be a replacement jack.

view full answer...

Answer 12

We do carry a few Replacement Bevel Gear Kits. like #F0933302S00, for Fulton jacks. These kits can be match by the manufacture and production year. There is a date code that should be stamped in the outside tube near the bottom of the jack. If you…

view full answer...

Fulton Jack Repair Kit Availability

Product Page this Question was Asked From

Continue Researching