Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line

See what our Experts say about this Hydrastar Accessories and Parts

• Parts Needed To Covert Electric Drum Brakes On Triple Axle Texas Pride Car Hauler To Hydraulic Disc
  I was able to determine that your 9,000lb axles on your Texas Pride Trailer will accept the Dexter Axle Oil Hub # 008-430-03. It uses the same Outer Bearing # 25580, Inner Bearing # 387A and this will use the Oil Seal # 10-51 which is the same 2.875 inner diameter as your grease seal. You will need the Oil Cap Kit # RG04-270 for the new hubs. And the Kodiak Synthetic Bearing Oil # XLPROLUBE can be used with all manufactures. The Kodiak Disc Brake Kit # K2R1058D11E will provide you with...
  view full answer...
• Triple Axle Brake Line Kit for Use with Demco Surge Actuator part # DM8204311
  Yes the triple axle brake line kit part # HS496-253 is the correct brake line kit for your trailer with the Demco actuator part # DM8204311.
  view full answer...
• Best Disc Brake Actuator for Triple Axle Drum Brakes
  For just the actuator by itself the correct Hydrastar is the part # HS381-8066 that you referenced as it's pressure rating is correct for drum brakes and is rated for up to three brake axles. For a kit that includes the needed junction box, 7-way connector, a junction box for easy wiring and other various terminals for an easy install you'd instead want the part # HS381-9066 as all of that is included with this kit. Then for a triple axle brake line kit we have the Hydrastar kit part...
  view full answer...
• Trailer Disc Brakes are Slow to Respond when Connected to a 2010 Dodge Ram w/Integrated Controller
  Dodge says their integrated trailer brake controller is compatible with the electric over hydraulic brake systems, but we have found their compatibility to be hit and miss at best. There are a few things that can cause slow response in the trailer brakes. First make sure everything is wired correctly and that there are no weak or bad grounds. Grounds should be attached to clean and corrosion free bare metal surfaces. Make sure there is no corrosion in the vehicle and trailer side connectors.Wiring...
  view full answer...
• Converting Electric Brakes To Electric Over Hydraulic Disc Brakes On Triple Axle Trailer
  Yes, we have the HydraStar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 1/4" Main Line, # HS496-153. We also have a 25 foot long kit, # HS496-253. With either kit, I recommend use with the HydraStar Vented Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi, # HBA16. This will convert the electric system over to a hydraulic system with the electric motor that pushes the plunger into the hydraulic master cylinder as you brake. I assume you have 3500 lb axles, and if...
  view full answer...
• Converting 2016 Diamond C 10k Axle Trailer and Iron Panther 7K Axle Trailer to Disc Brakes
  The D100G axles on your 2016 Diamond C trailer are 10,000 lb axles. Based on the manufacture date you need the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter # K2R1058D11E which fits the # 008-430-03 hub made after May 2013. If you need hydraulic brake lines I recommend the Hydrastar Hydraulic Brake Line Kit # HS496-252 or # HS496-253. I'm not sure if you have tandem or triple axles so I gave you the option for both. For an actuator and...
  view full answer...
• Recommended Idler Hubs To Add Slip On Disc Brake Kit To Toy Hauler With Triple 7000lb Axles
  You sure would! For your Toy Hauler with triple 7000lb axles the Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased # AKIHUB-865-7-2-EZ-K you were looking at will work perfectly with the Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs # K2R712. Since you have triple axles you will need six of the idler hubs and three of the disc brake kits. Now you have the electric over hydraulic actuator needed, but did not mention...
  view full answer...
• Parts Needed to Convert a Triple Axle Trailer from Electric Drum to EOH Disc Brakes
  The best braking system for towing a trailer that has brakes would be an Electric-Over-Hydraulic (EOH) system like what you are referencing. I do have a solution for you, but we do not have any of the products that you mentioned. Hydraulic disc brakes are superior to drum brakes and when you couple them with the accurate braking of a proportional brake controller like the Tekonsha P3 # 90195 it is hard to find a system that is more efficient. What I recommend doing is using an EOH actuator...
  view full answer...
• Can I Use the Dexter DX Brake Actuator To Convert Drum Brake to EOH On Triple Axle Trailer
  The Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes part # K71-650 will work well to actuate your drum brakes on the triple axle trailer when you switch over to electric over hydraulic brakes. You will also need a brake line kit. The longest brake line kit we have available is HydraStar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line part # HS496-253. I do not believe this line kit will be long enough but I do not know how far back your axle. If...
  view full answer...
  
• Converting Three 7,000 Pound Dexter Axles to Electric Over Hydraulic Brakes
  I can certainly help you out with a disc brake set up on your trailer. The first thing we need to find out in order to select the correct parts would be the inner and outer bearing numbers stamped into the sides of the bearings in the hubs you have now. With that information I can ensure that we get you the right parts. I would also need to know the bolt pattern of the wheels and what kind of braking system the trailer currently has. Also, do all 3 of the axles have brake mounting flanges?...
  view full answer...
• Disc Brake and Actuator Kit Recommendation for 2016 Grand Design Momentum 397th
  Your trailer has 7k Lippert axles on it so the disc brake kit you would need is the three sets of # K2HR712D for the disc/rotor and caliper kits. This won't be super cheap but it will give you the best option for converting to disc. For an electric over hydraulic actuator kit you then would want the part # HS381-9067 which will give you everything needed except for brake lines. For that you then would want the part # HS496-253.
  view full answer...
• Parts Needed To Convert a 2017 K-Z Durango Gold G384RLT From Drum to Disc Brakes
  I have attached for you below a list of parts that you will need to convert your 2017 K-Z Durango Gold G384RLT 5th Wheel Trailer from electric drum to hydraulic disc brakes. If my research is correct, you have two 7,000 lb Dexter Axles but if this is not the case please just let me know. Dexter Disc Brake Kit part # K71-694-695-12 (Grease) or part # K71-694-695-13 (Oil) Dexter DX Series Electric Over Hydraulic Brake Actuator part # K71-651 HydraStar Hydraulic Brake Line Kit part # HS496-253
  view full answer...
• Longest Hydraulic Brake Line Kit For Tandem Axles Available
  Yes, I do believe we have exactly what you're looking for. Check out the: -Hydrastar Hydraulic Brake Line Kit # HS496-253. This kit has a 25' long brake line, includes a 6' long brake line - 3/16", (4) 4-1/4' long brake lines - 3/16", (6) 18" male/male rubber flex lines, (3) 3/16" brass, round T-fitting, (2) 3/16" brass union fitting, (1) 3/16" brass, round X-fitting, 1/2" nylon hose clamps, 3/16" nylon hose clamps & self-tapping screws. Attached is a review video for you to check out...
  view full answer...
• Recommendation on Switching Vacuum Over Hydraulic Brakes to Electric Over Hydraulic Brakes
  Since the braking power is still hydraulic, you should have no issues converting from a vacuum over hydraulic system to an electric over hydraulic (EOH) system. The electric over hydraulic actuator will take the place of the vacuum that pressurized the existing brakes. Now, since you have disc brakes already installed on your trailer, I recommend the HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi, # HBA16. The HydraStar actuator will allow you to apply the brakes...
  view full answer...
• How To Determine A Correct Disc Brake Actuator For A 40 Trailer
  The longest brake line kit we offer is theHydrastar Hydraulic Brake Line Kit # HS496-253 which is 25' long, and uses a 3/16" main line. In order to determine the correct replacement disc brake actuator , you'll need to know the GVWR of your trailer, the size of hitch ball it will need to accept, and how it needs to mount. For instance, the Titan Zinc-Plated Actuator w/ Electric Lockout # T4750820 has a maximum weight capacity of 12,500-lbs, will accept a 2-5/16" hitch ball, and will bolt...
  view full answer...
• Parts Needed To Convert from Electric Drum to Hydraulic Disc On Trailer with 9K Axles
  In order to convert from electric drum brakes to hydraulic disc brakes on your 2017 Texas Pride Car Hauler Trailer you will need the following parts: Kodiak Disc Brake Kit part # K2HR958QD11 HydraStar Marine Electric Over Hydraulic Actuator Kit part # HS381-9067 Kodiak Hydraulic Brake Line Kit part # HS496-253 The HydraStar Actuators are a favorite here at etrailer as they have proven time and time again to be very reliable and perform extremely well.
  view full answer...
• Hydraulic Brake Actuator and Brake Lines for Drum Brakes to Homemade Trailer
  The Titan Zinc-Plated Brake Actuator # T4079200 can supply brakes to a triple axle trailer and Dexter Heavy Duty Suspension Kit # K71-360-00 will work as a suspension kit for 1-3/4" wide, double eye springs on triple axle trailers. Actuator # T4079200 will work so long as the GVWR of your trailer is no more than 8,000 lbs as that is what it is rated for. The brake line kit that can work for you is the Kodiak Hydraulic Brake Line Kit - Triple Axle # HS496-253 which measures 24 feet long. I...
  view full answer...
• Parts Needed to Convert Triple Axle Trailer with Drum Brakes to Electric Over Hydraulic
  You'd need a set of 10k rated hydraulic drum brakes like the part # 23-404-405 per axle and then also a kit with the EOH actuator and electronics like the Hydrastar # HS381-9066 and the brake line kit # HS496-253 and you'd have everything you need to convert your trailer with three 10k rated axles with drum brakes to electric over hydraulic drum brakes.
  view full answer...
• Disc Brake Kit Needed for a 2015 Cyclone 4200 with Triple Dexter Axles
  I reached out to my contact at Dexter Axle who gave me the spindle information for your specific axle. The compatible disc brake kit that I recommend going with is part # K2HR712D from Kodiak. My contact did mention that this axle originally came with electric brakes so you will need a brake line kit as well since it sounds like you already have an actuator. I have linked our available brake line kits. All you have to do is filter through the selection for the best fit for your trailer...
  view full answer...
• Parts Needed to Convert 9k Trailer Axles of Texas Pride Car Hauler to Electric Over Hydraulic
  We have all the parts you need to convert the 9k axles of your Texas Pride car hauler to electric over hydraulic but it's not the kit you mentioned. What you'd need is: Kodiak Disc Brake Kit part # K2HR958QD11 HydraStar Marine Electric Over Hydraulic Actuator Kit part # HS381-9067 Hydraulic Brake Line Kit part # HS496-253 This will give you the correct hub/drums, the same Hydrastar actuator that is widely considered to be the best, and all of the needed brake lines.
  view full answer...
• Is Larger Diameter Brake Line Required when Switching from Drum to Disc Trailer Brakes
  You would only need to switch to a larger diameter brake line if the braking response was slow. You can go to a larger line if you wanted but it won't be necessary. We have 1/4 line kits such as # HS496-251 for single axle trailers, # HS496-252 for tandem axle trailers, or # HS496-253 for triple axle trailers.
  view full answer...
• Availability of Brake Line Kit for 3 Axle Hydro-Disc Trailer
  I'd be happy to help you find the right brake lines to fix up your triple axle trailer. I've included a link to our brake line kits, but if you could find the fitting types you need and let me know that would help me find a kit or put one together for your trailer's needs.
  view full answer...
• Electric Over Hydraulic Brakes, Leaf Springs, Bearings, Hardware, & Brake Lines for Dexter 7K Axles
  Since the ProLube kit # XLPROLUBE2440KIT is only rated for use on 5,200 to 6,000 pound axles I do not recommend using it for 7,000 pound axles. Grease would be better for marine applications since a hub full of grease repels water and an oil bath hub could just let the water set on top. The correct grease seal for disc brake kit # K2HR712D is # RG06-070. It does have an inner diameter of 2.25 inches and the outer diameter at 3.376 inches will fit the hub in the disc brake kit. Spring...
  view full answer...
• Choosing Between Electric Or Electric Over Hydraulic Brakes on Grand Design Solitude 375RE 5th Wheel
  Mechanically speaking, electric brakes are simpler. They're easier to troubleshoot. They're quite a bike less expensive than hydraulic disc brakes. Disc brakes provide more efficient braking. If all in all, you're happy enough with the way your current electric brakes perform (other than the fact they don't currently self adjust) I'd probably stick with electric. In order to recommend the correct Nev-R-Adjust electric brake assemblies, I'd need to know the capacity of each of your axles,...
  view full answer...

Do you have a question about this Accessories and Part?