Converting Electric Brakes To Electric Over Hydraulic Disc Brakes On Triple Axle Trailer
Question:
Hello, we have Tri-axle snowmobile trailer with electric brakes, thinking about switching to Disc brakes. See you have a package for tandem brake swap what about a Tri-axle. Thanks
asked by: Jon S
Expert Reply:
Yes, we have the HydraStar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 1/4" Main Line, # HS496-153. We also have a 25 foot long kit, # HS496-253.
With either kit, I recommend use with the HydraStar Vented Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi, # HBA16. This will convert the electric system over to a hydraulic system with the electric motor that pushes the plunger into the hydraulic master cylinder as you brake.
I assume you have 3500 lb axles, and if so, I recommend the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs, # K2HR35D. This kit will give you the mounting flange, the calipers and pads and the rotors for one axle. You will also need the bearing kit # BK2-100 and the grease cap # RG04-020 for each axle. Grease like # L11390 should be used to pack the bearings.
I've attached some articles to help.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Triple Axle
- Hydrastar
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hydrastar Hydraulic Brake Line Kit - Triple Axle - 15' Long, 1/4" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Triple Axle
- Hydrastar
more information >
Continue Researching
- Q&A: Triple Axle Brake Line Kit that Uses 1/4 inch Main Feed Line
- Q&A: Recommendation for Routing Triple Axle Brake Line Kit
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Q&A: Wire Gauge Recommendation to Power 20 LED Trailer Clearance Lights
- Q&A: Replacement Triple Axle Hanger Kit for 2015 Kaufman Car Hauler with 7k Axles
- Q&A: Slip On Disc Brake Kit Recommendation for a 5,200 lb Axle with 6 on 5-1/2 inch Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Troubleshooting Brake Controller Installations
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Which Hitches are Made in the USA