Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 15' Long, 3/16" Main Line

See what our Experts say about this Hydrastar Accessories and Parts

• Converting to Electric Over Hydraulic Disc Brakes From Electric Brakes on Trailer With 7K Axles
  There are a number of parts you will need to replace the electric drum brakes on your trailer, and though there is not an all-in-one kit I can let you know the parts you need, starting with a disc brake assembly to replace your current hub and drum. I contacted Lippert with the serial number from you axle and based off what they told me the the correct brake kit is the Kodiak Disc Brake Kit # K2HR712D which is for 7,000 lb axles and has an 8 on 6-1/2" bolt pattern for your wheels. These...
  view full answer...
• Recommended Tandem Axle Brake Line Kit For 16' Trailer With Titan Brake Actuator
  I recommend the HydraStar Hydraulic Brake Line Kit # HS496-152 to use with the Titan Brake Actuator # T4848600 on your 16 foot tandem axle trailer with drum brakes. This kit contains a 15' main line to run from your coupler to the front axle and all the other lines and hangers needed from there.
  view full answer...
• Advantage of Converting to Electric-Over-Hydraulic Disc Brakes from Electric Brakes
  Disc brakes have better stopping power than electric brakes. They're also lower maintenance because they have fewer moving parts. You'll also gain power going to electric over hydraulic because you have the advantage of the stopping power of hydraulic brakes combined with the reaction time of electric brakes. I've linked an article that explains the parts needed to convert to disc brakes. You'll already have some of them like the brake controller and breakaway kit. But electric brakes...
  view full answer...
• Parts Needed to Convert Trailer With Tandem 15k Axles to Electric Over Hydraulic From Electric
  We can get you set up with an electric over hydraulic system for your trailer with 15,000 lb tandem axles. I will say that you will not want to go with the higher pressure 1,6000 psi actuator, which is too high for drum brakes and can potentially blow out the wheel cylinder. What you can do though is go with a 1,200 psi actuator made for drum brakes, which will still give you excellent stopping power. Here is exactly what you will need for your set up: - HydraStar Electric Over Hydraulic...
  view full answer...
• Troubleshooting HydraStar Electric Over Hydraulic Actuator for Drum Brakes
  I was unable to find an order number for you so I don't know the exact set up you used to install the HydraStar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi # HBA-10, but the issue doesn't seem to be the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. The issue is almost certainly the wiring or brake lines you are using, and it is strongly recommend you use 10 gauge wire # 10-1-1 for the power lead of the actuator. Additionally, your brake links may be too small in...
  view full answer...
• Are The Steel Brake Lines For Hydraulic Drum Brakes Safe To Use When Converting To Disc Brakes?
  As long as the steel lines are in good condition, then yes you will be able to reuse that portion of the brake lines on your trailer. You will want to look at a kit like the Hydrastar # HS381-9067 as it will come with the actuator, a 7-way connection and junction box to terminate the wiring and a breakaway kit since you will have electric actuated brakes. We do have the Brake Line Kit # HS496-152 if you decide you want all new brake lines otherwise you should only need 4 of the Hoses...
  view full answer...
• Parts to Convert From Electric Brakes to Electric Over Hydraulic Disc Brakes on 6,000 lb Axle
  Thank you for all that detailed information, it is exactly what we need to get you set up with brakes so you can keep your family safe like you mentioned! You initially said you wanted to switch over from drum to disc brakes, but in your question you referenced an electric over hydraulic actuator and brake controller, so it sounds like you want to switch to electric over hydraulic (EoH) disc brakes for the best braking possible. To get this set up, you will need a new hub and rotor for...
  view full answer...
• Is Swapping to Disc Brakes Beneficial For a 2010 Keystone Laredo 5TH Wheel?
  For your 2010 Keystone Laredo 266RL a Disc Brake trailer brake upgrade would provide you will a lot better stopping power. You would need to remove your current brake assemblies and hubs. The disc brakes will also require some modification to your trailers braking system. You will have to use an electric over hydraulic brake actuator which may require a different brake controller and run brake lines that will need to be filled with brake fluid and properly bleed. The benefits are that...
  view full answer...
  
• Parts Needed For Converting 5th Wheel Trailer With Tandem Axles To Disc Brakes
  We have just what you need to convert to disc brakes on your fifth wheel trailer. First, I recommend the Kodiak Disc Brake Kit, part # K2HR526D. This is for one axle so for a tandem trailer you will need to order 2 kits. This kit has a 6 on 5-1/2 bolt pattern. The inner bearing has a 1.750 inner diameter and the outer bearing has an inner diameter of 1.250 inches. For a brake line kit I recommend part # HS496-152 for a 15-ft kit, and part # HS496-252 for a 25-ft kit. These are designed...
  view full answer...
• Converting From Electric to Electric over Hydraulic Disc Brakes on Two 7,200 lb Dexter Torflex Axles
  Thanks for the info and we have all the parts you are going to need to convert from electric to electric-over-hydraulic disk brakes, which is the best braking system you can have for a trailer (most stopping power combined with the best overall control). A Dexter Torflex 7,200 lb torsion axle uses inner bearing # 25580, outer bearing # 02475 and grease seal # GS-2250DL. That info, along with the 8 on 6-1/2" bolt pattern, is all we need to know to get you the right set up, and I'll recommend...
  view full answer...
• Parts Needed To Convert 12K Dexter Trailer Axles From Electric Drum To Disc Brakes
  The Kodiak Disc Brake Kit # K2R1258L12 will allow you to convert one of your 12K Dexter axles from drum to disc brakes. This kit will mount to your Dexter Hub 008-214-09 once removing the drum section and brake assemblies. You will need 2 kits as your trailer has tandem axles. Be sure to check your bearings and races and replace as needed. You will want to install 4 new oil Seals # 10-56 as they often become damaged during the removal and installation process. Inner Bearing # 3984 Inner...
  view full answer...
• Can Actuator, Harness and Brake Lines be Purchased as a Kit?
  The HydraStar Vented Marine Electric Over Hydraulic Actuator # HS381-8065 is available in a kit. The HydraStar Marine Electric Over Hydraulic Actuator with Breakaway and 7-Way RV Harness # HS381-9065 features the actuator, breakaway system and 7-way connector. The only other piece you'd need is the brake lines; for a single axle you would want the HydraStar Hydraulic Brake Line Kit # HS496-151 and for a double axle you would want # HS496-152. I've added links to video reviews of these...
  view full answer...
• Parts Needed To Install Electric Over Hydraulic Disc Brakes On a 2021 Grand Design Imagine XLS 21BHE
  The Timbren Axle-Less Trailer Suspension System # ASR3500S06 is our only 3,500LB axle option for your 2021 Grand Design Imagine 21BHE XLS travel trailer. Otherwise you will have to order a custom axle as the only axles we have which have the same 86.5" hub face measurement as your current axles are 5,200LB and larger. The Kodiak Disc Brakes # KOD59FR will include new hub/rotors with all the bearings and grease seals for one axle along with the caliper and mounting brackets. It does include...
  view full answer...
  
• Disc Brake Kit with 8 on 6-1/2 Bolt Pattern for 7,000 Pound Axle
  Since you have 6 lugs it's very possible you have 6,000 pound axles. But either way you can upgrade to an 8 lug for 7,000 pound axles. You'll need to replace the bearings, races, and seals to match the new sized hubs. The Kodiak Disc Brake Kit # K2HR712E with Bearing Kit # BK3-200 will work great on your trailer. These have an e-coat finish to help prevent corrosion from the elements. If you don't already have disc brakes you're also going to need an electric over hydraulic actuator...
  view full answer...
• Determining Which Replacement Braking Components For Eagle Tandem Axle Boat Trailer
  You are correct that you can replace the older Dico 60 surge brake actuator on your Eagle tandem axle trailer, and for that I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs # 099-175-00. For new brake lines I recommend going with the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 15' Long, 3/16" Main Line # HS496-152 which is designed specifically for tandem axle trailers. Moving on to the replacement brakes, bearings, and possibly...
  view full answer...
• Electric Over Hydraulic Oil Bath Disc Brakes Compatible For Trailer With Lippert 7000lb Axles
  I have another option for you, but the HydraStar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K # HSE7K-T1 you were looking at foryour Lippert 7000lb axles requires grease and cannot be converted to oil bath. Instead I recommend the Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Oil - 8 on 6-1/2 - E-Coat - 7,000 lbs # K71-694-695-13 which is already set up for oil bath, but you will need one kit per axle on your trailer. Moving on you will need actuator...
  view full answer...
• Parts Needed to Add Electric Over Hydraulic Disc Brakes to Trailer
  A great disc brake kit for your trailer is the Kodiak # K2HR526D. This includes two brake assemblies with a 6 on 5-1/2 bolt pattern. They include the mounting bolts as welll. Since your trailer has hub and drum assemblies now you need to replace them with rotors. If your trailer is a tandem axle the brake line kit I suggest is the HydraStar # HS496-152. If it isn't a tandem axle or you need a different length I've linked our selection of other HydraStar kits. For an actuator the HydraStar...
  view full answer...
• Determining Correct Replacement Brake Line Kit For 1989/1990 EZ Loader Boat Trailer
  We have a wide variety of brake line kits that may work on your 1989/1990 EZ Loader Boat Trailer but the correct kit will be dependent on the length of your specific trailer. For example if your trailer is around 15' we have the HydraStar Hydraulic Brake Line Kit # HS496-152 which includes new main line to run from the surge brake actuator on the trailer to the back of the trailer, and four separate lines to run to each braking assembly. If your trailer is longer then you will need to...
  view full answer...
• Adding Electric Over Hydraulic Disc Brakes to Boat Trailer
  While we don't have a go to kit we can build one using parts that are available. First is the HydraStar Vented Marine Electric Over Hydraulic Actuator # HS381-8067. If you are building from scratch we have the HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness # HS381-9067 to include the wiring and battery components. Second is the Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 # K2HR526DKG. These assemblies are rust resistant for your boat trailer....
  view full answer...
• Converting to Electric Over Hydraulic Disc Brakes on 5,200 lb Axle
  Thanks for all of that excellent information, and we can put together the parts you need, as we have the exact brakes you are looking for, and just as a note you do need a 5-bolt brake mounting flange like # 4-44-1, so you will want to ensure this is what you have. If so, for the brakes I recommend: - Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs # K2R526S Then for an actuator and breakaway battery combination I recommend the HydraStar Marine...
  view full answer...

Do you have a question about this Accessories and Part?