30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket
(68 reviews)
Price: $6.78
In Stock
30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket
Item # 38630
Retail:$7.14
Our Price: $6.78
You Save: 5%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (68)
- Q & A (0)
- Photos
Pollak Accessories and Parts - 38630
- Wiring
- Circuit Breaker
- Pollak
- 30 Amp
Features:
- Metal housing with perpendicular mounting bracket
- 2-Piece design
- Attached by spot welding
- Cycling automatic reset
- Cycles continuously during over-current condition
- Returns to run mode when source of over-current is removed
- (2) 10-32 Studs
- Yellow, dichromate (copper color) plating on battery terminal
- Zinc plating (silver color) on auxiliary terminal
- Straight mounting bracket
- SAE Standard J553 compliant
Specs:
- Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls
- Terminal dimensions: 0.66" long
- Current rating: 30 DC amp
- Voltage rating: 12 VDC (Voltage Direct Current)
- Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C)
- Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C)
- 1-Year limited warranty
54-230 Pollak Single-Way, Thermal Circuit Breaker - Cycling/Automatic Reset - 90-Degree Mount Bracket - 30 Amp
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket - 38630
Average Customer Rating: 4.8 out of 5 stars (68 Customer Reviews)
by: Jack04/10/2019
The Duel cable with a black and white wires on the FJ Cruiser it takes about 14 ft to run through the frame on the driver side. I used a tape measure to fish the wire through the frame. The Prodigy P3 was easy to install and works very well
by: CaptRon12/21/2016
Does exactly what it is supposed to do...protect the wiring under overload. So far, no issues after one year of being in the harsh conditions under my Jeep's hood.
by: Philip05/08/2023
Circuit breaker seems to be working as intended. Ni issues so far at 1 year+
by: bowtieollie04/18/2017
Excellent quality and strength. Why skimp on something as important as your hitch? I have purchased three of these Draw Tites - I guess a repeat customer will scream about the true quality a company can garner from repeat customers. When you pull show cars worth six figures, you can't afford a poorly made hitch.
Step up, step out, and don't fret what you are pulling.
by: Whitney T10/13/2017
It's a circuit breaker!
We got this wire our small teardrop for underway charging. I put it inline after the relay/solenoid, wired so we wouldn't exceed reasonable current flow in 10ga. wiring. I don't think it's ever tripped, except when I loaded it for testing.
Would use again.
by: Alan03/25/2018
I had a couple of corroded breakers on my 12 year old travel trailer that caused a lack of 12v power from the house battery to the 12v system components. The replacements solved the problem. I have purchased from etrailer before and I've always been completely satisfied with the products.
by: Carl04/04/2022
The equipment arrived complete and in good shape. However the most impressive thing about this, and earlier orders with etrailer was the customer service. When they saw one of the items was delayed they reached out to offer an alternative. They also kept me well informed of progress and when it was shipped/delivered. The videos on their products including installation are also very detailed and helpful. Great place to do business with.
by: Patrick 06/03/2023
Good fast transaction. Item was as adve rtised.
by: Morris04/16/2020
Perfect connector for what I was looking for on my 2019 RAV4. I originally installed it with the L bracket, but later changed it to be flush in the bumper. Looks very clean. The prefab pigtail made install into the car very easy as well.
by: Henry10/20/2020
Cheaply made. Product gets a 3 star. Shipping gets a zero star. Your warehouse picked a product that had the all important bracket broken off. It was not in the box so the extreme volume and lack of packers delayed my installation. Thank you for shipping correct item 2 weeks late. This is becoming a regular policy.
by: David01/16/2013
This product. Is. A great one its going to be used to conect my brake controller to. My 99 Chevy Tahoe I. Got. Both the 20 amp and the. 30 amp . Hopfuly I. Won't need. the 40amp . thanks so much for a. Wonderful produce
by: Joe S.06/28/2015
Works perfect on my travel trailer, in between my converter and my auxiliary battery. So cheap, that I bought 2 so as to have a spare...why not? Processing and shipping was super fast, I ordered on Wednesday afternoon and had it Saturday. It was awesome to see the video provided by eTrailer, as it helped convince me that this was the exact part I needed. I'll be shopping here again!
by: Rob06/01/2015
I install them in line and one more time the tutorial video was the best tool in my tool box. even wen I got a HVAC back ground the video was my best tool. Thank you.
by: Chuck10/30/2016
I should have ordered the in-line breaker without mounting bracket......discovered it, but you were so fast the parts had been shipped..... I removed the bracket and installed it my Jeepster. It does the job.
by: Richard 07/15/2020
Exactly what I needed to add a brake controller to my RV. Thanks for the support.
by: Kimberly06/03/2022
They had to send this to me extra because it was missing from the ETBC7L kit that I purchased. It was inconvenient that it was missing but customer service and getting the replacement was easy and expedient.
by: Marvin08/07/2015
Fast shipping and arrived on time. Breaker has plastic case not metal but should not affect its function. Bolted on in place of original and should work as original. Pleased with purchase.
by: Roger C09/23/2020
Everything was as advertised, and thank you Kaylyn R for your wonderful customer service. It took awhile to get everything installed, because of crazy events in the past year, but it all works great!
by: Michael08/27/2019
I ordered this controller and additional parts from Laser. Before committing to buying, I asked him many questions. He answered them all in about a clear and concise way as possible while presenting a picture of how to install the device. It arrived today and I haven't started, but he also emphasized that I could call if I ran into any difficulties. I'll follow up when the job is complete. My experience in this context could not have been better.
Michael
by: Frank 07/04/2021
I am very pleased with your products. The installation went very well and your video sure made it look easy. I have already told my friends about your products.
by: Declan b.07/23/2018
very fast delivery,sales person was very helpful,easy installation,will do biss again,thank you e trailer.
by: Layne C.07/04/2017
The right part, manufacturer, shipped and received as promised. etrailer reliable as usual. Thank you!
by: Dan G.08/19/2016
great product used on 3 vehicles for brake control
by: Ken04/16/2019
Etrailer is the bomb, great customer service and everything arrived on time, with no issues!
by: Gary L07/18/2018
Worked perfect just had to shorten studs so hood spring would clear them when closed.
Mike L.
7/18/2018
You might consider relocating the breaker. If its close enough to the hood spring that you had to shorten the studs, theres a chance that on rough pavement the spring could still contact the studs, which could short out the circuit.
25
68
Show More Reviews
See what our Experts say about this Pollak Accessories and Parts
- Does the Power Wire for a Brake Controller Need to Be Ran Directly to the BatteryTo answer your first question, it is possible to splice the brake controller's 12 volt power wire into the 12 volt power wire you have attached to the vehicle's battery to charge the trailer's battery but this is certainly not recommend. If I were you, I would just run the 12 volt power wire from the brake controller directly to the battery with the recommended circuit breaker for that particular controller placed 6" for the positive terminal. The problem that you are going to run into...
view full answer... - Installing Prodigy P3 Brake Controller on 2016 Forest River Forester on Sprinter 3500 ChassisI can help you find the parts you will need to install a Prodigy P3 Trailer Brake Controller # 90195 on your 2016 Forest River Forester on a Sprinter 3500 chassis. The P3 will need to be hardwired since there is not a custom wiring harness available for the 2016 Sprinter 3500. The parts you will need to install the brake controller are: Approximately 35 feet of duplex wire # 10-2-1 30 amp circuit breaker # 38630 A 5 pack of 10-12 heat shrink butt connectors # DW05745-5 2 yellow ring...
view full answer...
- Can The Hopkins Multi-Tow Trailer Adapter Power a Wheelchair Lift Motor? According to the owners manual for your 2020 Honda Ridgeline your 7-way uses a 20 amp fuse for the charge line that would power the Hopkins Multi-Tow Trailer Connector Adapter # HM47675. Of the couple lifts that I checked the manufacturer requirements for power they both require a 30 amp fused circuit connected to the battery with a 10 gauge wire. You can verify the requirements for your wheelchair lift from the manufacturer but with the information I have from the 2 manufacturers it...
view full answer... - Brake Controller Install on 2008 Jeep Grand Cherokee with Factory Tow PackageI spoke with one of my contacts at Tekonsha, who tells me he is unaware of any vehicle-specific problems installing a controller on a 2008 Grand Cherokee. The only connection to the vehicle that could possibly affect the vehicle computer would be connecting the red wire on the controller to the wrong wire at the brake stoplight switch. The controller would be mounted under the dash to the right of the steering column, within easy reach of the driver. You can find the green wire that...
view full answer... - Can the Stromberg Carlson Electric Trailer Jack Be Rewired if the Wires Got CutYes, you can order new wire and splice it into the remaining wire. The Stromberg Carlson Electric Trailer Jack # JET-3555 uses 10 gauge wire. You can use the 10 Gauge Primary Wire # 10-1-1 (sold by the foot) and the Deka Heat Shrink Butt Connector # DW05745-5 to splice in the wires. The jack should also have a 30-amp fuse on the red wire. You will want to make sure that the fuse is still intact and replace it if not. We do not have a fuse holder that works with 10-gauge wire. But you could...
view full answer... - What Size Fuse or Circuit Breaker Should be Used for Brake Controller on a 2006 Chevrolet SilveradoThe reason you would not want to install a 30 amp fuse or circuit breaker in a 4 brake magnet application, when installing a Prodigy P2 brake controller, # 90885, is that the extra amperage required to break the circuit could cause an issue with the wiring on the trailer or vehicle because it would take longer for the circuit to spike to 30 amps. In applications with 6 to 8 brake magnets or more, more amperage is required to activate the brakes properly so the time for the amperage spike...
view full answer... - Troubleshooting Trailer Brake Controller Working with Brake Pedal but Not with Manual Override If you are getting the decimal on the Reese Brakeman display when applying the brake pedal but not with the manual override lever, it is an indication that the controller is not receiving power. The LED decimal is showing up with the brake pedal because it is getting power/indication from the brake light switch. But when the manual override lever is used, power needs to come through the controller's black wire, which should be connected to the truck's battery via 30 amp circuit breaker...
view full answer... - Availability Of Short 4-way to 7-way AdapterThe closest thing we have to a molded 4-way flat to 7-way blade adapter is the Custer Trailer Connector Adapter - 4-Way Flat to 7-Way Round # KIT-7P-4 which has the 4-way connector to plug into the 4-way on your vehicle and give you the 7-way blade connector you are looking for. If you are just needing the lighting functions of the 7-way then you will not need to use the 3 additional wires. If your trailer has trailer brakes, or has a battery and you need 12v power in the connector you...
view full answer... - Brake Controller Needed to Actuate Electric Trailer BrakesIf your trailer brakes are wired into your brake light circuit on your tow vehicle as you describe, as soon as you apply the vehicle brakes, a full 12-volts will be immediately sent to the brakes which will typically lock them up unless they are incorrectly adjusted so that they merely apply a slight drag. The correct method to actuate your trailer brakes is to use a brake controller. Brake controllers are not vehicle specific, so you can use whichever controller you wish. Brake controllers...
view full answer... - Circuit Breaker to Activate Trailer Lights on 2012 Nissan ArmadaWe do have circuit breakers available, depending on what you need, such as the Pollak 40 amp In-Line Circuit Breaker # 9510, as well as the 20 amp # 9506P and 30 amp # 38630. I have added a link to our page with each of our circuit breakers for you. If you happen to be referring to the relays that are necessary for Nissan models which do not have factory tow packages, you would need the Curt Relay Kit for Nissan Aftermarket Tow Package # C57000. You may also need relay 38666-1 for running...
view full answer... - Electric Brake Wiring Harness for a 2007 Chevy SuburbanYou will need three components for electric brake wiring. First, if you have factory 7-Way installed I recommend the Tekonsha P2, # 90885. It is one of our best selling and highly rated brake controllers. Last you will need a 7-Way replacement adapter (unless your vehicle came with one installed) like the Replacement Multi-Tow 7-Way and 4-Way Trailer Connectors for Ford, GM Trucks with Factory 7 Way, # 30955. Under the vehicle, near the spare tire, unplug the round 7-pole factory-installed...
view full answer... - Troubleshooting Wiring For Prodigy P2 Brake ControllerThe blue wire at the back of the brake controller is connected to the brake pin on the trailer connector. The White wire should be run to the negative battery post and does not require a circuit breaker. The Black wire should be attached to the positive battery post, and it does use a 30-amp circuit breaker like part # 38630 inline. The red wire at the back of the brake controller is attached to the cold side of the stoplight switch located at the top of your brake pedal under the dash....
view full answer...
- Troubleshooting Brake Controller Function on Discontinued Draw-Tite iCommand With No Display ShowingThe Discontinued Draw-Tite I-Command Trailer Brake Controller 5535 should show a single dot when the trailer is not connected with the boost off. When connected, you should have a dot c to show the trailer connected and the boost off. There should be a digital numerical display when the brake pedal or the manual override is activated to show your output. I've attached the manual to assist. No display shows a lost of power to the brake controller. You will want to check the black power...
view full answer... - Can Trailer Brake Controller be Used on Harley Davidson Motorcycle Pulling Small TrailerThe Curt Spectrum Trailer Brake Controller # C51170 can be absolutely be used with your Harley pulling a small trailer for your pups (and in the process making your wife happy). Normally with a motorcycle you want to use a time-delayed controller but since the Spectrum's main unit can be mounted at any angle, this is one of the proportional controllers that can be used so long as you can find a good mounting point for both the main unit and the control knob. To install the Curt Spectrum...
view full answer... - Recommended Trailer Wiring Compatible with 2016 Harley-Davidson Ultra ClassicWe don't have any custom wiring harnesses for motorcycles. You can use the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector # C59496 for the separate turn signals, running light, and brake light. If you are connecting to a trailer, the 5th function for a 5 way can be added using the # HM47900 with that 5th wire being either an auxiliary power option or a trailer brake controller output. If your trailer has brakes, you will want to use...
view full answer... - Trailer Dome Lights Do Not Work on a Haulmark Trailer Towed By a 2010 Chevrolet SilveradoThe first step to troubleshooting your trailer dome lights is to determine how the lights are wired. If your trailer has a 4-way connector, then they will be connected to the running light circuit. If your trailer has a 7-way connector, then the dome lights will be connected to a 12-volt auxiliary power circuit coming from the trailer connector. If your trailer has a 4-way connector and the running lights on the trailer work, then there is an issue with the connection between the dome...
view full answer...
- Do I Need To Add Blue Wire To Install Brake Controller on 2008 GMC Savana Van w/ Existing 7-wayIf your 2008 GMC Savana Van has the factory 7-way tow package, the blue wire should already be run. The wire should be under the dash near the emergency brake pedal. The wire may be tucked up and out of the way, or behind some other wire. You will connect the blue wire from the back of the brake controller to the existing blue wire which will supply power to the brakes on your trailer. Black is 12-volt power and should be connected to the positive battery terminal via 30-amp circuit breaker,...
view full answer... - How to Power Enclosed Trailer Lights with Auxiliary BatteryIn order to provide lights with power outside of the tow vehicle battery you will need to add an auxiliary battery on the trailer like the Brightway # BRW34FR, as you've noted. There isn't an adapter, per se, so you will need to wire everything into the trailer; I can give you a general ideal of how it's going to need to be done. I recommend cutting off the 7 way trailer plug and then wiring that into a junction box # 38656. From there, you'll connect the cut wiring for the trailer lights...
view full answer... - Ford Super Duty Trailer Connector Wont Power On In-Bed Fuel Transfer PumpI do have an option for you but it's probably not what you'd had hoped for. The issue you'll run into trying to use the trailer connector as a power source for your transfer tank pump is that the battery charge line circuit within the trailer connector that you want to use for power is only active while moving on most newer Ford trucks. This is by design and has been coined the "Ford Smart Tow". Therefore, you won't be able to utilize this with the transfer pump in the way you want. If...
view full answer... - P.L. Error Shown on Tekonsha Prodigy P2For starters, we need to confirm that you have the correct Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers which is part # 3015-P. Now, the "P.L". error you are receiving means there is a power loss when applying the trailer brakes. There are not many things you can check since the trailer brake wiring provision are built-in along with the factory harness however, there should be an M6 stud on the power distribution center (PDC) that is for the brake controller power so make...
view full answer... - Parts Needed to Install a Tekonsha P3 90195 on a 1995 Chevy VanHaving the 4 Flat and 7 Way already installed, you are very close to being finished. You will need a length of wiring ( # 10-2-1 ) as well as 40 amp ( # 9510 ) and 30 ( # 38630 ) circuit breakers. You will need a few other odds and ends like butt connectors and the like, but you are mostly there. Unfortunately we do not have a list of installers, but I always tell people to check with an auto shop you have had good service from. They will typically give you the best price and do the best...
view full answer... - Is the Tekonsha PRIMUS IQ Brake Controller Circuit Protected for a 2001 Dodge RamBrake controllers, like the Tekonsha PRIMUS IQ Brake Controller part # TK90160, themselves are not circuit protected. They require properly rated circuit breakers along the 12 volt power feed from the vehicle battery. This brake controller will require a 20 amp circuit breaker, # 9506P, between your brake controller and battery if your trailer has 2 or 4 brakes or a 30 amp circuit breaker, # 38630, if your trailer has more than 4 brakes. If your 2001 Dodge Ram came with factory tow...
view full answer... - Where Does Black 12V Power Wire for Prodigy P2 Brake Controller Connect to VehicleTo hardwire a Prodigy P2 brake controller # 90885 in your 2016 Dodge Journey you will need to make the 12V input power connection (for the black wire) at the positive battery post, going through a circuit breaker like 20-amp # PK54520. This value circuit breaker will be fine for trailers having up to 4 brake assemblies but if your trailer has more than 4 braked wheels then instead use a higher-value breaker # 38630 which is rated for 30-amps. The other wires from the P2 (red, white and...
view full answer... - How Many Trailer Brakes Should be Used with a 20 Amp Circuit Breaker or 30 Amp Circuit BreakerThe recommendation for 2 to 4 brakes is a 20 amp circuit breaker, # PK54520, and for 6 to 8 brakes a 30 amp circuit breaker, # 38630, just as you have stated. Usually, you would go with the smallest sized circuit breaker for the system being used. This is so if there is a problem, it can be caught right away. If you plan on towing trailers with 2 to 4 brakes and trailers with 6 to 8 brakes, it would be best to go with the 30 amp circuit breaker as the 20 amp circuit breaker would not...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Victoria B
Video by:
Joshua S
Video Edited:
Jacob T
Installed by:
Ryan G
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jack D.
4/11/2020
Great