Can the Stromberg Carlson Electric Trailer Jack Be Rewired if the Wires Got Cut
Question:
someone cut my wires that come out of the head of the jack, can i order the wire , i dont have any idea what the idiots can do with just that much wire. i still have about 6 to 8 inches left hanging out of the head, can i splice it with the rest of the wire, thanks
asked by: Dan B
Expert Reply:
Yes, you can order new wire and splice it into the remaining wire. The Stromberg Carlson Electric Trailer Jack # JET-3555 uses 10 gauge wire. You can use the 10 Gauge Primary Wire # 10-1-1 (sold by the foot) and the Deka Heat Shrink Butt Connector # DW05745-5 to splice in the wires.
The jack should also have a 30-amp fuse on the red wire. You will want to make sure that the fuse is still intact and replace it if not. We do not have a fuse holder that works with 10-gauge wire. But you could also use a circuit breaker like the 30 amp. In-Line Circuit Breaker # 38630 which automatically resets, instead of having to replace the fuse.
Products Referenced in This Question
30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 30 Amp
- Pollak
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Product Page this Question was Asked From
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 24 Inch Lift
- Bolt-On
- Weld-On
- 1 Jack
- Stromberg Carlson
more information >
Continue Researching
- Q&A: Best Solution For Gaining Tail Gate Clearance On A-Frame Trailer Tongue Jack
- Q&A: What is the Distance from the Mounting Surface to the Top of Electric Trailer Jack # JET-3555
- Q&A: Can Generator Be Ran While Installed on MORryde RV Generator Slide Out Tray
- Q&A: Fuse Location for 12-Volt Accessory Feed to 7-Way Trailer Connector on 2005 Chevy Silverado
- Q&A: Retracted Height of Stromberg Carlson Electric A-Frame Trailer Jack JET-3555
- Q&A: Recommended Weight Distribution System To Tow An ATC Game Changer 2513 Travel Trailer
- Article: Best Camper Jacks
- Q&A: What Weight Capacity of Tongue Jack is Needed for a 4,600 Pound Dry Weight Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Article: Performance Chips and Modules
- Article: Trailer Jacks
- Article: How to Raise Your Travel Trailer Height