Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This leveling scissor jack with a 2,500-lb capacity will keep your RV level and stable. It adjusts from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.
Features:
Specs:
Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.
Average Customer Rating: 4.8 out of 5 stars (624 Customer Reviews)
This leveling scissor jack with a 2,500-lb capacity will keep your RV level and stable. It adjusts from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.
Threads on one r-pod 202 jack stripped. I ordered two replacements. The replacements fit the original brackets. This was good since one of each was spot welded on. Heavier with much more coarse threads than the original jacks.
Same as the original equipment. Fits well, fast delivery. Thank you etrailer.
Had to replace one of my jacks after a little "incident" when backing in my camper. This replacement is the most trouble-free jack on my camper to this day. It never binds up, doesn't squeak, and is definitely more solid than the other three. Not too hard to install either. Would buy again!
Lucky I found the identical stabilizer jack at etrailer as the other three on my trailer. Same size, looks, and capacity to replace the one that got bent during a minor collision
Diego S.
7/29/2023
Great!
Great product. works just fine. The problem I had was matching the mounting plate under my trailer. Apparently not a standard so I had to take it to a trailer manufacturer to make it fit.
These were a perfect replacement. They got here quickly! Thanks!
I’m not 100% satisfied because I was expecting better quality for the price. However, they do their job if you have a 20’ travel trailer like mine. I suggest if you have a bigger trailer go get the heavy duty version.
Great product! Although, it did not fit our current RPod bracket. Had to grind of old bracket and purchase new self tapping screws since I don't own a welder.
Selection and speed of delivery are top notch, etrailer has saved me hundreds of dollars by my being able to by the parts I need for my trailer and fixing things myself. Thanks for being there
Bolt holes lined up perfectly. Replace the two rear jacks in 30 min easy job. New jacks seem to much better quality than originally installed jacks and they were the same weight capacity.
Best purchase for my camper! Easy to install and hook up. It works great.
Transaction was smooth. Shipping in timely manner.
This is a much sturdier looking stabilizer jack than the original one I'm replacing. The only possible issue is that the frame bracket where it mounts on the two plates is about 1/8 inch wider than the original. I was hoping to use my original plates but I think I'll need to use the plates that came with the new jack. Anyway, those plates are also different (slightly larger with the mounting holes spaced differently) than the original but it is a much better product so I will make it work.
I used ground freight for shipping to reduce the overall cost and i still received this in a timely manner. I highly recommend this company etrailer.
Installed 4 total in place of the arm style stablizer. Very happy, mechanically work great, look great, and the camper is very stable. Much more than before.
I purchased these stabilizer jacks to replace two original jacks that were damaged. My original jacks were mounted at the extreme end of my frame rails and were repeatedly damaged when driving out of service stations with deep curbs and driving to remote camping sites. I was easily able to place both these new units farther forward to remove this hazard. I was able to position the jacks where I wanted and hold them in place to bolt on by raising them jacked up to place mounting bracket against the frame. Simply then used self tapping screws and job was complete.
Exactly what I was needing to replace the original that was broken.
Thomas
12/5/2023
The project is still working as intended but he’s showing a good bit more rest than the original jacks. The quality is not great, but it is functional.
These scissor Jack's are much better than the factory ones. I bent my original stabilizers last season. These Jack's are much more heavy duty than factory. These have multiple mounting holes so just zip them in on the frame with self tapping screws. Easy install.
Tell Kimberly that I’ve got my package
It isn’t possible to determine the bolt hole configuration for mounting the jacks onto the trailer using the web site. It would be very helpful if a template in a pdf file were on the site that would enable you to print the template and verify proper configuration and alignment prior to ordering.
Look very sturdy and packaged super wel l.
Perfect replacement for the 2516g rockwood pop up. Easy to replace. Great service and fast shipping.
The jack came in a timely manner. It was not quite the same as the original that I bent, but it was workable. I used the original hardware to mount it on the frame. It works great, and I will be more careful with my walk arounds in the future..
Great product, fast delivery !!
Great service and on time delivery
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank
12/1/2023
They work very well. They make using the trailer when not coupled to vehicle. Very sturdy.