Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 60" Wide

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• Recommended Flat Tow System for 2018 Chevy Silverado 1500 Crew Cab 4x4
  Your 2018 Chevy Silverado 1500 crew cab 4x4 curb weight is 5,300 lbs based on my research. To flat tow this vehicle, I recommend upgrading your 5,000 lb hitch to the Curt Class V Universal Weld-on Receiver Hitch # 15903 which is a universal fit for frames between 18 and 61 inches wide. Then for your flat towing setup, I recommend you begin with the Roadmaster MX Base Plate Kit - Removable Arms # RM-3176-3 and use Loctite Threadlocker # LT37420 for the installation. Then for your tow...
  view full answer...
• Recommended Weld On Universal Fit Class 5 Trailer Hitch for BlueBird All American Bus Diesel Pusher
  For your BlueBird School Bus conversion, there isn't a specific confirmed fit Class 5 trailer hitch receiver. The universal fit weld on hitch is your best option. The Class V Universal Weld-on Receiver Hitch # 15903 you asked from is a great option as is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07. Both of these will have a 2 inch receiver opening. These hitches will need to be welded bare metal to metal for the correct strength....
  view full answer...
• How to Increase the Weight Capacity of a Trailer Hitch for an RV
  I do have an option for you but I am not aware of any way to increase the tongue weight capacity of a trailer hitch save for a weight distribution system which does not apply for hitch mounted accessories like a scooter carrier. Therefore, your only option would be to replace the trailer hitch you have now with one rated for more tongue weight and for that I recommend the Class V Universal Weld-on Receiver Hitch part # 15903. If you are not an experienced welder than I recommend taking...
  view full answer...
• Recommended Hitch For A 2021 Ford Transit 350 Cutaway Chasis
  When it comes to your 2021 Ford Transit 350 Cutaway Chasiss we do not have any front mount hitches or custom trailer hitches for your Ford Transit. The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 60 inch Wide # 15903 is a universal weld on hitch. It has adjustable side brackets that slide along the hitch body to match exactly where you want to weld the hitch. The hitch has a black powder coat finish that resists rust and corrosion. I attached a review video...
  view full answer...
• Trailer Hitch Compatible with Liftgate Truck
  We have many hitch options for a truck that has a lift gate, but very few of them are a simple bolt on custom application. Because the locations for attaching lift gates vary, you will need to use a weld on option like the Class V Universal Weld-on Receiver Hitch # 15903. There are many different bracket options for a hitch like # 4907 and # 4916.
  view full answer...
• Do You Carry a Trailer Hitch Receiver For a 2019 Hyundai County Bus?
  You will need to install a universal receiver like the Curt # 15903 as we do not carry a custom fit receiver for your 2019 Hyundai County Bus. Since this is not a common vehicle found inside the US our manufacturers do not have a custom fit option. We do offer both UPS and USPS shipping to the United States, Canada, Puerto Rico, the Virgin Islands, Guam, and FPO or APO addresses. Both the shipping and billing address must be an address in the United States, Canada, Puerto Rico, the Virgin...
  view full answer...
• Upgrading Hitch Capacity for 2007 Monaco Signature Series
  We can get you a higher capacity hitch, though please keep in mind that your towing capacity is going to be limited to the lowest-rated component. So if your 2007 Monaco Signature Series only has a 12,500 lb towing capacity that would be the most you could tow even with a higher-rated hitch. There is not a bolt-on option available if you wanted a higher capacity, so for your 36-1/4" frame rails the hitch that would work is the Curt Class V Universal Weld-on Receiver Hitch # 15903. This...
  view full answer...
• Recommended Trailer Hitch Receiver, 7-Way Wiring And Trailer Brake Controller For 2015 Isuzu NPR XD
  A hitch like the Class V Universal Weld-on Receiver Hitch # 15903 is going to be what I recommend for your 2015 Isuzu NPR XD, since there are no custom fit receivers. This universal hitch will weld in place on your frame and can support up to 1,500lbs of tongue weight and a trailer up to 15,000lbs. The weld brackets are 18-1/2" long and the frame can be between 18" and 61" wide. The Tekonsha Universal Wiring Harness w/ ModuLite and Brake Controller Harness # 22551 will give you the wiring...
  view full answer...
• Recommended Hitch for a 1997 Eldorado Aerotech Shuttle Bus Build on a Ford E-450 Chassis
  I have a solution for you but the brackets on the Curt item # 15903 can not be cut and there are no shorter options. I recommend using the Draw-Tite Trailer Hitch item # 41990-07 instead. This is also a class V universal hitch with a 2" receiver. It however includes brackets that provide a 7" drop. It can also be bolted on or welded. I have attached a diagram below so you can compare the dimension of these brackets to your Eldorado's frame to make sure they will work. If you have any...
  view full answer...
  
• Recommended Receiver Hitch for Class C Motorhome on 2003 Ford E-450 Chassis
  We don't offer a bolt-on hitch that would offer the capacity you're looking for, but we do offer some weld-on options that would get you where you need to be. In order to choose the correct hitch, you'll need to determine the amount of drop you need by measuring the vertical distance between the underside of the frame members and the lowest point of the rear bumper. You'll want to choose a hitch with a drop greater than your measurement. For a 3 inch drop, use # 15901, if that's not enough,...
  view full answer...
• Recommended High Capacity Hitch and Dual Ball Mount for a 2003 Bluebird Bus
  I have a solution for adding a heavy duty hitch to your 2003 Bluebird bus but there aren't any TorkLift SuperHitches that will work because they are all custom fit. You will need to go with a universal option and the one I recommend is the Curt Class 5 Universal Weld-on Hitch w/ Brackets item # 15903. This is a class V hitch with a 2" receiver. It has a 15,000 lbs towing capacity and a 1,500 lbs maximum tongue weight. This hitch must be welded on. There is no way to bolt it to your bus...
  view full answer...
• Recommended Hitch With 10,000 Pound Capacity for 2005 National Sea Breeze
  For that kind of capacity you're going to need a universal weld-on hitch like the Curt Class V # 15902. This fits frames from 18" to 44" and has a gross towing weight of 15,000 lbs and tongue weight of 1,500 lbs. If your frame is larger you can use the # 15903 which fits frames up to 60" instead. Make sure to consult your owner's manual for your towing capacity. You will be limited by whichever capacity is lower.
  view full answer...
• Availability Of Trailer Hitch Receiver For 2016 Ford T250 Cab and Chassis
  I may have an option for you, but we do not have a custom fit trailer hitch receiver confirmed to fit your 2016 Ford T250 cab and chassis. The only option would be to have a universal hitch like the Class V Universal Weld-on Receiver Hitch # 15903 fit to your frame and welded to the frame of your T250. The # 15903 fits frames that are 18" - 60.88" wide so you will need to measure your frame to verify it falls within this range. This hitch has a 1500lb tongue weight rating, and 15000lb...
  view full answer...
• Trailer Hitch for a 1966 Chevy Impala
  While there aren't any custom hitches that will bolt right up to your 1966 Chevy Impala we do have universal hitches that could work. The best option is going to be # 15903. This is a weld-on hitch so it will need to be installed by a professional welder. It will fit your 50 inch wide frame (it may even have to be trimmed shorter!). I have included a link to the installation instructions for you. We also have a similar hitch from Buyers, # 3371801051, which has shorter brackets.
  view full answer...
  
• Recommended Trailer Hitch For 2000 Spartan Newmar
  I can get the hole dimensions for you of the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit part # BWHDRH25132 but it is not meant to fit a 2000 spartan MM newmar RV chassis so it will most likely be too narrow since it is designed to fit pick up trucks. I recommend to use a weld on adjustable hitch like Class V Universal Weld-on Receiver Hitch part # 15903. It can be installed on frames from 18" to 61" to fit various trailer frames. It also has a 15000 lb gross towing weight capacity....
  view full answer...
  
• Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer
  Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Trailer Hitch Recommendation for an Ambulance on a 1993 Ford F-350 Chassis
  Hey Kenn, thanks for reaching out! For an ambulance body you'll need a universal-type hitch like the Curt Class 5 Universal Weld-on Hitch w/ Brackets # 15903. This gives you a 2" receiver and the brackets can be modified and spaced out up to 60" apart so you'll need a shop to help get this installed. Unfortunately there aren't any hitches designed specifically for an ambulance which is why a weld-on application is the best option.
  view full answer...
• Trailer Hitch Option For Bus
  There isn't anything specific for your Chevy Mid Bus but there is an option for a universal, adjustable weld-on hitch. For example, if your frame was 18" to a maximum of 60" then you could use the Curt Class 5 Universal Weld-on Hitch w/ Brackets # 15903. I have added a link below to our entire selection of weld-on hitches for you.
  view full answer...
• Recommended Trailer Hitch For A Vehicle With A 32" Frame Width
  The Curt Trailer Hitch Receiver # C15323 has a 39" distance from center to center of the mounting holes so it's not going to be a good candidate for your application. Since you can weld the best option is going to be an adjustable-fit weld-on hitch. We have a few different options depending on the drop you'll need: 3" # 15901 7" # 41990-07 9" # C47CR 11" # 15903 16" # 41990-16 The crosstube of these trailer hitches can be cut down to size to fit your vehicle's frame width.
  view full answer...
• Trailer Hitch receiver For A 2011 Ford Expedition EL
  Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus
  Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
  view full answer...
• Hitch Recommendation for a 2022 Ram 5000 Cab/Chassis
  While we do have some great universal-fit options for your 2022 Ram 5500 4x4 cab/chassis, we do not carry any custom-fit options. With that being said, the best option is a weld-on hitch like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901 or the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver # 15903. The # 15901 comes with a 3" drop if you need lowered height and comes with brackets that adjust for frames between 18" to 44" wide. The # 15901...
  view full answer...
• Will The Draw-Tite Trailer Frame Hitch Receiver Fit A 1974 Chevy K5 Blazer With A Gas Tank Shield
  The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From the back of the crossmember tube to the center of the first bolt hole is 1". The distance between the inside of both mounting ears is 30-1/4". This hitch should sit directly under your frame rails so you can use that 1" measurement to see if the tube will run into interference with your gas tank shield. If this doesn't work then...
  view full answer...
  
• Recommended Trailer Hitch Receiver for 1952 Chevy
  The only hitch that would work for you is a weld-on option like the Curt # 15903. This is a Class V hitch with universal fit. It has a 2" receiver and is compatible with frames that are between 18" and 61". I have attached a link to the installation instructions for you to take a look at.
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?