Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"
(109 reviews)
Price: $166.71
In Stock
Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"
Item # 41990
Retail:$257.75
Our Price: $166.71
You Save: $91.04
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (109)
- Q & A (0)
- Photos
Draw-Tite Heavy Duty Receiver Hitch - 41990
- 2 Inch Hitch
- 16000 lbs GTW
- Weld-On
- 44 Inch Wide
- Class V
- Draw-Tite
- 1600 lbs TW
- No Drop
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.
Features:
- Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
- Designed for full-size trucks with long wheel bases and heavy-duty suspensions
- Computer-aided steel construction ensures strength and durability
- Oversize safety-chain loops are easy to access
- Tested Tough - safety and reliability criteria exceed industry standards
- Weld-on installation
- Side brackets (sold separately) are required for installation
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Cross tube dimensions: 44" wide x 3" deep x 3" tall
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Not for use with weight distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41990 Draw-Tite Ultra Frame Service Body Receiver - Cross Tube Only - Universal - Class V - 2"
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2" - 41990
Average Customer Rating: 4.8 out of 5 stars (109 Customer Reviews)
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.by: Crafty Mechanic08/29/2023
I used the cross tube to build my own custom hitch behind a hitch. This is a quality product and worked well for my custom build. Closest to my RV, in the main receiver, I carry my motorcycle. I used this to mount a bike rack behind the motorcycle carrier. For custom builds like this, the cross tube is a perfect product to build around. I mounted this to my support rails using grade 8 bolts, this way I can break it down easily and store it at camp or at home. The cross tube is quality steel and has good welds. Class V was more than I needed, but this was the best option for my project.
by: Mike J04/08/2020
Bought this hitch for a custom application. WAY OVERKILL for what I needed but better to over engineer it than under. This baby is capable of towing 16000 lbs with a tongue weight of 1600 lbs. I will never tow more than the 5000 lbs my coach is rated for but I needed it to extend out and be a bit lower than the standard hitch to carry my KLR 650 on a rack which comes in at about 525 lbs.
by: Dave 11/19/2023
This worked perfectly for my school bus.
by: Jeff 12/28/2023
awesome quality and quick delivery during the holiday season nonetheless!
by: Troy09/25/2022
I cut and installed this hitch on my 2002 E450 with bolts and welded as well. Very pleased with it.
by: Frank03/01/2018
Company was great with helping me find the right hitch for our church bus. We have been very pleased with the quality of the hitch! We pull a 12' loaded trailer to south Texas each year and the hitch performs great. Thanks for all your help!
by: Robert11/15/2019
Etrailer's part of this purchase was great. Shipped quickly and well packaged. The problem was with the manufacturer ... Draw-Tite. The hitch is great except for one thing ... the stickers look like a drunk slapped them on. It may sound trivial ... but I have spent countless hours building a custom expedition vehicle I am proud of. I now have to remove them because they look like crap.
Victoria B.
11/22/2019
Your expedition vehicle sounds awesome! There is one sticker on the hitch that lists the towing and tongue weight capacities. If possible, I recommend leaving that sticker attached for safety reasons.
by: Joshua07/08/2023
Excellent product.
by: Gaston11/16/2022
Extremely strong and heavy duty hitch
by: KerryG02/18/2014
The product was in stock, delivered in a timely manner, and exactly as advertised. E-Trailer even upgraded the delivery at no extra charge. The hitch has a Made in Mexico sticker. The welds look good; much better than welds on most Chinese import goods. Very pleased.
by: R. Bond10/06/2014
This weld-on receiver was the perfect choice for adding a receiver to our tandem dump truck. I couldn't be happier!
by: Dan 02/19/2021
Product is great, shipping was as expected with a winter storm impacting it. Product arrived hanging outside the box with one end filled with mud from being dropped by the delivery man. Typical for the shippers in this area but the packaging for this heavy of an item could have been better. This is the reason for 4 and not 5 stars. Product deserves 5 stars, shipping probably 2.
by: Mark 01/09/2023
Exactly what I wanted, heavy duty
by: James 01/05/2020
Very good product easy installation and prompt shipping. I highly recommend.
by: Jon12/08/2017
Great product. But even better Sevice from etrailer as usual. Always a great buying experience.
by: Larry C07/03/2013
The product and shipment was just what
Etrailer said it would be.
by: John r07/13/2018
Mitsubishi FUSO fe
Looking to install this hitch.
by: Joe 01/03/2023
Heavy duty, perfect
by: Josh 10/19/2021
Solid hitch! Excellent customer service
by: Chester 03/25/2020
excellent quality woul buy again fast service no problems
by: Roger R11/30/2020
Excellent product, exactly what I wanted. Service for your products has been very good. It arrived sooner than expected. Thankyou
by: Doug B.10/12/2017
Easy to use and it works great!
by: Joey03/09/2022
Just what I was looking for
by: Mcdaniels10/30/2022
by: brian c05/10/2012
excellent, fast and friendly service, I couldn't ask for more!
25
109
Show More Reviews
See what our Experts say about this Draw-Tite Heavy Duty Receiver Hitch
- Trailer Hitch for 1994 International BusWelding is going to be the only option for your 1994 International bus. There are no custom fit hitches available for a bolt-on installation. I recommend using the Draw-Tite Ultra Frame Service Body Trailer Hitch # 41990. You can have custom brackets made or you can get # 41990-07 with 7" brackets or # 41990-16 with 16" brackets. This is a Class V hitch with a 2" receiver and a max gross trailer weight of 16,000 lbs.
view full answer... - Solution for Trailer Hitch Receiver on 2006 Bluebird All American FE School BusSince there are no custom fit hitches for your 2006 Bluebird All American FE School Bus you will need to use a universal hitch. I recommend one of the following: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 (7" brackets) -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 (16" brackets) The only difference between the 2 is the size of the mounting brackets. Both have a 2" receiver and the same 16,000 lb max trailer capacity fitting frames up...
view full answer... - Width of Ultra Frame Weld On Class IV Hitch ReceiverI called the manufacturer and part # 41990, will accommodate up to a 44 inch frame. We also have part # 41990-07 and 41990-16 which are both 44 inches wide with different size mounting brackets if these would fit your application.
view full answer... - Recommended Bolt On Hitch for a 2002 Thomas Saf-T-Liner School BusI've got two bolt on options that will work with the 37" frame on your bus. Both of them are listed as weld on however there are predrilled holes in the brackets along with steps in the installation instructions that allow these hitches to be installed without welding. Which one you need will be determined by how far down your bumper extends from your bus's frame. You'll need to take a measurement to determine how much drop you have. I have listed them below: 7" Drop - Draw-Tite Ultra...
view full answer... - Trailer Hitch for 2010 IC Bus CE-SeriesSince there are no custom fit hitches for your 2010 IC Bus CE-Series your only option is a universal hitch like the # 41990. You can order it with 7" brackets # 41990-07, 16" brackets # 41990-16, or have custom brackets fabricated. This is a weld-on installation so we recommend taking it to a certified welder. It is a Class V hitch with a 2" receiver and a 16,000 lb max gross trailer weight/1,600 lb max tongue weight.
view full answer... - Recommended Class V Hitch For A 2020 Ford F53 ChassisWe do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a frame that is up to 44" wide, so they will have absolutely no problem fitting the 34" wide frame of your F53. Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Cross Tube # 41990 Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver...
view full answer... - Can Draw Tite Service Body Hitch 41990 Fit Ambulance Build on 2007 Chevy ExpressFor what you are trying to do a fabrictor is going to be your only option for safe install. What I would recommend is take the cross tube part # 41990 to a qualified fabricator in your area and tell him what you are looking to do and he will come up with a way to install the hitch at the exact height you are looking for.
view full answer... - Hitch Tube Recommendation for Fabricating Hitch to RVIf you are planning on having a crossmember welded to the frame of your trailer you would be best off just having the part # 41990 welded to the frame as that has the hitch opening already welded to it. Or we have the part # 41990-07 which has the hitch attached to drop brackets.
view full answer... - Why Is The Frame Service Body Trailer Hitch Cross Tube # 41990 Not Rated For Weight Distribution? Since the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 is a universal part and not vehicle specific it is impossible to rate the amount of torsional force the tube would be capable of supporting without mounts. And as this is generally used on vehicles with much stronger rear suspension components than passenger vehicles they do not generally call for a weight distribution hitch to reduce rear sag.
view full answer... - Size of Class IV Weld-On Hitch Receiver by Reese, Hidden-Hitch and Draw-Tite 41990This Class IV Weld-On Hitch is 44 1/2 inches in length, has a main tube size of 3 inch square, and is approximately 7-1/2 inch from the back of the hitch to the front of the receiver.
view full answer... - Instructions for Class V Draw-Tite Ultra Frame Service Body Trailer Hitch Cross TubeI'm not sure why you aren't able to pull up the instructions for the Draw-Tite Trailer Hitch # 41990 because the link is working okay for me but regardless I cut and linked the instructions to photos and attached them to the page for you to check out.
view full answer...
- What is the Towing Capacity of a Mitsubishi Fuso FE160Your Fuso FE160 has a tow rating and whatever that tow rating happens to be is what the capacity is no matter what the hitch is rated for. So for example if the Fuso is rated for 10,000 pounds gross trailer weight then you would be limited to that even though hitch # 41990 is rated higher. The opposite is also true; if the hitch is rated for 16,000 pounds but the vehicle is rated for 20,000 pounds you are limited to 16,000 pounds because it is the lower rated component. From what I...
view full answer... - Is it Possible to Install Draw Tite Hitch 41990 with Zero Drop Mounting BracketsWith the part # 41990 we do not have any zero drop brackets to use when installing it. Due to the universal nature of this cross tube though you could pretty take it to a qualified fab shop and have them fabricate a way to mount it to your trailer in the location you want.
view full answer... - Recommended Hitch for 2015 Winnebago Minnie Winnie For Motorcycle CarrierFor your 2015 Minnie Winnie you need a universal hitch like the Draw-Tite Ultra Frame # 41990-07. There are no custom-fit hitches available for your motorhome. This requires a weld-on installation and comes with 7" brackets. If you need more of a drop it is also available with 16" brackets # 41990-16. This is a Class V hitch so it has more than enough tongue weight capacity at 1,600 lbs. Make sure to consult your owner's manual since you will be limited by the tongue weight capacity of...
view full answer... - Replacement Hitch Option for 1998 Holiday RamblerI do have an option for you but if you want to replace your current hitch, you'll have to weld and or bolt/drill a new one on as we don't offer custom fit options for motorhomes like a 1998 Holiday Rambler. That said, you should be able to fit an option like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 or part # 41990-16 without too much trouble and that's what I recommend. They both provide up to a 16,000 lb weight capacity.
view full answer...
- Solution for Front Mount Hitch on 2004 Dodge Sprinter VanThe only option for a front hitch on your 2004 Dodge Sprinter is a universal hitch like the Draw-Tite # 41990-07. Unfortunately, nobody makes a custom fit front hitch for your van. This is a Class V weld-on hitch. It includes 7" brackets, but if you need longer brackets the # 41990-16 with 16" brackets is also available. We recommend taking this to a certified welder for installation.
view full answer... - Solution for Front Mount Hitch on 2019 Ford RangerThe only option for a front hitch on your 2019 Ford Ranger is a universal hitch like the Draw-Tite # 41990-07. Unfortunately, nobody makes a custom fit front hitch for your truck. This is a Class V weld-on hitch. It includes 7" brackets, but if you need longer brackets the # 41990-16 with 16" brackets is also available. We recommend taking this to a certified welder for installation.
view full answer... - Determining Which Universal Trailer Hitch receiver Fits A 2001 VanHool C2045 Bus Converted To An RVThe correct trailer hitch receiver for your 2001 VanHool C2045 bus to RV conversion is going to be dependent on the width of the frame and how far below the frame the rear bumper is. The # 41990-07 you were looking at has 7" tall mounting brackets, so as long as the bumper does not hang down farther than 7" this would work perfectly. If you need a hitch with taller mounting brackets then I recommend the # 41990-16 which has 16" wide mounting brackets. Both of these hitches will fit frames...
view full answer... - Recommended Trailer Hitch Receiver For 1991 International 4700 W/ Low Profile ChassisI do have an option for you, but there is not a custom fit trailer hitch receiver option for your 1991 International 4700 with a low profile chassis. Based on the picture you provided your truck appears to be pretty low to the ground and the 16" tall brackets the Draw-Tite Universal Hitch # 41990-16 has would more than likely put the hitch too low. Instead the Draw-Tite # 41990-07 would be a better option as it only has 7" tall mounting brackets. The brackets can be trimmed to get the...
view full answer...
- Possible Solution for Trailer Hitch for Suzuki Mini TruckWe do have a potential solution for a trailer hitch receiver for your Suzuki mini truck, although there aren't any hitches that are specifically designed to fit. What you can possibly use is a universal weld-on hitch, depending on the width of your Suzuki's frame. If the truck's frame is up to 44 inches wide you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07, which has 7 inch tall weld-on brackets or # 41990-16, which has 16 inch tall weld-on brackets....
view full answer... - Trailer Hitch Options for a 1995 Isuzu PickupThere are universal style trailer hitches that you may be able to adapt to your 1995 Isuzu Pickup, but, trailer hitch manufacturers do not make a custom fit trailer hitch for that truck. Universal trailer hitches like the Draw-Tite Weld-on Ultra Frame Hitch, # 41990-07, have mounting brackets that fit a variety of different frame styles and are adjustable to fit different frame widths, but they do require welding to install. Because this is a universal application, it would be up to the...
view full answer... - Could Draw-Tite Trailer Hitch 41990-07 Be Used As Front Mount Trailer Hitch On 1989 GMC P30 Van?There is nothing wrong with using the Draw-Tite Trailer Hitch Receiver # 41990-07 with 7" tall mounting brackets or # 41990-16 with 16" tall mounting brackets as a front mount trailer hitch receiver for your 1989 GMC P30 Step Van. You are correct that may need to do some modifications to get the hitch to fit, but as long as your frame is not wider than 44" this should not be a problem. I do recommend having a qualified welder weld the hitch to make sure it is structurally sound, and use...
view full answer...
- Hitch Option For Motorhome on 2008 Ford E-450There are no hitches that are specific fits for your 2008 Jamboree built on a Ford E-450 chassis. The only option that might work is with a universal weld-on hitch, depending on how wide your frame is. For frames that are up to 44 inches wide you can use an option from Draw-Tite, with either 7 or 16 inch tall brackets: - 7 Inch Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 - 16 Inch Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #...
view full answer... - Trailer Hitch for 1999 Ford F-350 Chassis With Custom Truck BodyWe do have trailer hitch options for your 1999 Ford F-350 chassis with a custom truck body; from my research it looks like the Royal custom truck body you referenced is a service truck body. If your 1999 F-350 has a frame that is up to 44 inches you can use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07, which has 7 inch tall weld-on brackets or # 41990-16, which has 16 inch tall weld-on brackets. The correct height will depend on how much space you need to clear...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Kathleen M
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Frank
3/1/2019
Hitch is still working well! We have had no problems with it and the quality has been great!