Recommended Hitch For A 2021 Ford Transit 350 Cutaway Chasis

Question

Question:

I have a new RV. It is built on a 2021 Ford Transit 350 cutaway chasis. Do you have a custom fit front reciever hitch that will fit my rv?

asked by: Mark A

0

Expert Reply:

When it comes to your 2021 Ford Transit 350 Cutaway Chasiss we do not have any front mount hitches or custom trailer hitches for your Ford Transit.

The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 60 inch Wide # 15903 is a universal weld on hitch. It has adjustable side brackets that slide along the hitch body to match exactly where you want to weld the hitch. The hitch has a black powder coat finish that resists rust and corrosion.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

You would not need a new plug. You would run the positive wire from the alternator to the 1 and A post of the Isolator #DW08771. Check out the attached picture for a wiring diagram.

view full answer...

Answer 7

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

view full answer...

Answer 8

We currently have two different front mounted hitch options for your 2017 Honda Ridgeline. This being the Curt Front Mount Trailer Hitch Receiver part #C31082 and the Draw-Tite Front Mount Trailer Hitch Receiver part #65073. According to the…

view full answer...

Answer 9

Yes we do! The Curt Front Mount Hitch #C73ZV will be the correct hitch for your 2024 Ram 3500 Diesel Mega Cab. I just double checked with my contact at Curt and they confirmed that it will indeed fit the Diesel Mega Cab models. It will be a no drill…

view full answer...

Answer 10

The Curt Front Mount Trailer Hitch #C31082 sits up really close to the bottom of the front bumper on your 2019 Honda Ridgeline, so while it will have an effect on ground clearance, it's not by much at all. We had a customer install install the…

view full answer...

Answer 11

We have checked directly with the manufacturer and confirmed that the Draw-Tite Front Mount Hitch #65076 will be a good fit for the 2023 Ford F-350 Dually. It will be a no-drill install, but you will have to temporarily remove and trim some of the…

view full answer...

Answer 12

EcoHitch does not allow their instruction manuals to be linked, so I cut out and added the most relevant portions of the installation of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7352. This hitch, which is a confirmed fit for your…

view full answer...