Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• 2006 E-450 Super Duty Shuttle Bus Trailer Hitch Receiver
  For your 2006 Ford F-450 Shuttle Bus you are going to need to use a universal hitch. For this you will need to measure how wide your frame rails are apart on the rear of your bus. Then you will need to know how much drop from the frame rails to the bottom of the bumper is required for the hitch to fit. The Curt Class 5 Universal Weld-on Hitch # C47CR will fit frames that are 18"-44" wide and brackets have a 9" drop. The Curt Class 5 Universal Weld-on Hitch # C99CR will also fit frame...
  view full answer...
• Hitch For C5500 GMC Truck
  For a commercial vehicle such as the GMC C5500 you will need an universal hitch such as the Curt # C97CR Class-5, with 2-1/2” receiver, and fitting frame beams 18” to 62” in width with a 20,000 pound tow capacity. If you do not need one as wide you could select the 44” wide Curt # C37CR, or the 44” wide Curt # C99CR hitch with an 18” drop and 16,000 pound tow rating. I have included links to each of these items.
  view full answer...
• Front Mounted Trailer Hitch Options For A 2004 Lexus GX 470
  Hey Eric, There aren't any custom-fit front mounted trailer hitches available for a 2004 Lexus GX 470 so you would need to go with an adjustable-fit weld-on trailer hitch. To do this you'll need to measure down from the frame to the location where you'd like the receiver tube to sit to figure out your drop. I've listed out the drops we currently offer below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
  view full answer...
• Option For Trailer Hitch For Holiday Rambler Motorhome
  There is possibly an option for a trailer hitch that fits your 2004 Holiday Rambler, and I say possibly because while a custom fit hitch is not available, there are universal weld-on hitches. This depends on the width of your frame from outside to outside, so if your frame measures up to 44 inches (from outside to outside), you can use any of the following. - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop: Curt...
  view full answer...
• Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed
  Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed from the frame down to clear the rear bumper. We offer a variety of drops to accomplish this that I've listed out below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These would all need to be welded...
  view full answer...
• Recommended Trailer Hitch For A 1987 Mazda B2600 4x4 Truck
  When it comes to installing a trailer hitch on your 1987 Mazda B Series Pickup we do have options for you but we do not have a direct fit hitch available. I recommend The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 44 inch Wide # C99CR. This hitch will have to welded onto your vehicle. The hitch has a black powder coat finish which resists rust and corrosion. I recommend checking your manual to know the proper towing capacity of your vehicle. This hitch will fit...
  view full answer...
• Solution for Front Mount Hitch on 2007 Dodge Sprinter 2500
  I do have a solution, but there are no custom fit options available for your 2007 Dodge Sprinter 2500. What you can use is a universal hitch like the Curt # C47CR. This is a Class V weld-on hitch so we recommend taking it to a certified welder for installation. The hitch has a 2" receiver, a 9" drop, and fits vehicle frames 18-44" wide. If you need taller brackets the # C99CR is also available with an 18" drop.
  view full answer...
• Solution for Class V Hitch on 2011 Fleetwood Expedition Motorhome
  For hitch fabrication we only offer the receiver tube like the # E-11 or # C49511. You would need to take this to a local fabricator and they would be able to fashion a hitch and brackets that will fit your 2011 Fleetwood Expedition Motorhome. The other option would be to use one of the universal Class V hitches we have listed for your motorhome. We have the Curt # C47CR with a 9" drop and the Curt # C99CR with an 18" drop. Both options have a 2" receiver. The # C37CR and # C87CR are...
  view full answer...
• Recommended Trailer Hitch For A 2005 International Truck 8600 Series
  When it comes to installing a trailer hitch on your 2005 International 8600 4x2 Day Cab Single Axle I recommend The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver - 44 inch Wide # C99CR. This hitch has adjustable side brackets that slide along the hitch body to match exactly the width of your vehicle frame before welding it on. The hitch has a maximum gross towing trailer weight up to 16,000 pounds and has a maximum tongue weight up to 1,600 pounds. The side brackets...
  view full answer...
• Class 5 Trailer Hitch Receiver for Frame Measurement of 33-1/2 Inches
  There are a number of options for Class V trailer hitch receivers that are weld-on options and fit a frame width of 33-1/2 inches, it just depends on what is best for your application in terms of drop (there isn't anything custom fit for your Isuzu, hence a weld-on hitch being the only option). - Curt Class 5 Universal Weld-on Hitch with Brackets # C99CR This hitch will fit that frame distance and produces a drop of 18 inches from the frame of your Isuzu. - Curt Class 5 Universal Weld-on...
  view full answer...
• Trailer Hitch Fitment for a 2005 Ford E-350 Passenger Van Bus
  Great question, Adrian! For your 2005 Ford E-350 set up as a passenger van bus you will need to have a heavy duty universal hitch installed like the Curt # C99CR. This type of hitch installs by welding so you'll need to have a shop or certified welder help you plan out the installation. If you don't already have a shop you plan on working with we have an installer locator I'm linking to this page for you to reference and see who is in your area to help you with the isntallation.
  view full answer...
• Hitch For 1993 Ford E-350 RV With 42 Inch Frame
  Thanks for the frame dimensions, and while there are hitch options for your 1993 Ford E-350 RV, I checked with the hitch manufacturers and there are no custom fit options. So what that means is in order to add a hitch to your RV, you would need a universal weld-on hitch. There are three different options, with each of them being Class V hitches with a 2 inch receiver, and fit frames that are between 18 inches and 44 inches wide, so they will fit your '93 E-350's 42 inch frame. The difference...
  view full answer...
• Option For Heavy-Duty Hitch on Motorhome
  Since there isn't a custom-fit option for your motorhome, the only possible option for a heavy-duty hitch would be a universal, weld-on type. There are three options from Curt for frames that measure up to 44 inches (from outside to outside), with the only difference being the drop they provide (the distance from the bottom of the frame to the top of the receiver - 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901 - 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR - 18" Drop:...
  view full answer...
• Determining Which Heavy Duty Trailer Hitch Receiver Will Fit 2003 Freightliner Columbia
  While we more than likely have a hitch or hitch plate that will fit your 2003 Freightliner Columbia, we do not have one that is confirmed to fit. With that being said we still may have an option that will work for you, you will just need to measure the width of your frame. If your frame is 34" wide then an option like the Buyers Products Hitch Plate with Receiver Tube # 3371809065 you were looking at would work. This hitch will need to welded and bolt to the frame. If your frame is not...
  view full answer...
• Heavy Duty Trailer Hitch Receiver Fitment On a 2012 Chevy Silverado 2500HD with Utility Bed
  I reached out to Torklift to see if they had any fitment information on their SuperHitch Original Trailer Hitch Receiver # TLC1208 for your 2012 Chevrolet Silverado 2500 with a utility box. They said while they did not have any fits for different utility beds that the top receiver on their hitch mounts in the same location as the factory receiver. So if you still have the factory receiver on with your utility bed you will be able to use this receiver. If the receiver was removed to make...
  view full answer...
• Best Trailer Hitch for a Bus with 39" Frame Rail Spacing
  Thanks for reaching out, Andrew! The best solution for adding a hitch to your bus is the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C99CR since there aren't any custom options for your bus. Since this is a weld-on installation you'll need to have an experienced welder do the installation to make sure it is capable of safely towing your trailer.
  view full answer...
• Will The Draw-Tite Trailer Frame Hitch Receiver Fit A 1974 Chevy K5 Blazer With A Gas Tank Shield
  The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From the back of the crossmember tube to the center of the first bolt hole is 1". The distance between the inside of both mounting ears is 30-1/4". This hitch should sit directly under your frame rails so you can use that 1" measurement to see if the tube will run into interference with your gas tank shield. If this doesn't work then...
  view full answer...
  
• Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHD
  Hi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
  view full answer...
• Availability Of A Trailer Hitch For A Hyundai H100 Imported Truck
  I do have a potential solution for you. I am afraid we do not carry any kind of custom fit trailer hitch for a Hyundai H100. It may be possible to fit your truck with a universal weld on hitch like the Curt Class 5 Universal Weld-on Hitch # C99CR. The flanges are adjustable and can be made to fit frames between 18" and 44" wide. You would need to take your truck to a professional welder and have the hitch fabricated to fit your vehicle.
  view full answer...
• Will the GearSpace 34 Fit a 2020 Winnebago Vita 24P and a 2020 Toyota Sienna?
  The GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out - 34 cu ft - 300 lbs - Dark Gray # HGK819 is designed to fit a 2-inch hitch receiver on your 2020 Winnebago Vita 24P. I went ahead and called my contact at Let's Go Aero, and they confirmed that the weight capacity of 300 pounds remains the same even when the carrier extends to its full length. If you need a hitch recommendation for your 2020 Winnebago Vita 24P, I recommend the Curt Class 5 Universal Weld-on Hitch w/ Brackets...
  view full answer...
• What Bike Rack Will Hold 2 60-Pound Fat-Tire Electric Bikes on a Fifth-Wheel Trailer?
  A bike rack that can withstand the extra torque on the end of a fifth-wheel trailer that can hold 2 60-pound fat tire electric bikes is the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # HLY64FR. The RV Rider has an impressive per-bike weight capacity of 80 pounds and can hold fat-bike tires up to 5 inches wide. Apart from being able to withstand the extra forces exerted on the rack while mounted on a fifth-wheel trailer, the RV Rider has attaching...
  view full answer...
• Trailer Hitch Receiver Options For 1999 Ford E450 Ambulance
  The width of the mounting channel is 2-7/8 inches for the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. It's pretty unlikely this is going to fit, and for applications like yours, the best option is a universal hitch that you can weld on. So long as your frame is no longer than 44 inches wide from outside to outside, a universal hitch will work, you just need to measure how far down you need the receiver to be from the bottom of the frame (the drop). Once you know that, you can...
  view full answer...
  
• Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus
  Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
  view full answer...
• Trailer Hitch receiver For A 2011 Ford Expedition EL
  Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?