Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44" Wide

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• How To Add Class V Trailer Hitch Receiver To 1993 Dodge Ramcharger
  I may have another option for you, but there is not a Class IV or V trailer hitch receiver confirmed to fit your 1993 Dodge Ramcharger. The only option to add one would be using a universal fit hitch like Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44" Wide # C37CR and having it welded to the frame of your vehicle. The # C37CR fits frames that are 18" - 44" wide so you will need to make sure your frame falls within this range before ordering. While this Class V...
  view full answer...
• How to Get 2-1/2" Trailer Hitch Receiver for a 2001 Dodge Ram 2500
  The only way to install a trailer hitch with a 2-1/2" receiver on your 2001 Dodge Ram 2500 is to go with a universal-type hitch like this one from Curt: - Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR All of the custom fit options for your vehicle only come with a 2" receiver so you'll need to have something universal like what I mentioned above welded to your vehicle frame in order to get the larger receiver size.
  view full answer...
• 2-1/2 Inch Trailer Hitch Option For 2007 F-350 Super Duty With Utility Bed
  The hitch you mentioned is for pickups and not a utility bed, so the best option that may work is a universal weld-on hitch. It simply depends on the width of your frame; for example, if your frame is up to 44" wide you can use the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44" Wide # C37CR. I have added a link below to our entire selection of universal 2-1/2" hitches for you as well.
  view full answer...
• Recommended Trailer Hitch For A 2000 MCI 40 Foot Intercity Bus
  When it comes to installing a trailer hitch on your 2000 MCI 40 foot Intercity Bus we do not have a custom hitch that would fit but you can weld on The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2 inch Receiver - 44 inch Wide # C37CR. The trailer hitch has a maximum gross trailer weight up to 20,000 pounds and has a maximum tongue weight up to 2,000 pounds. I would recommend checking the vehicle's manual to see the proper towing capacity for your bus. The hitch as a black...
  view full answer...
• Does the 2.5 Curt Class V Universal Weld-on Hitch Come with Longer Brackets
  The Curt Class V Universal Weld-on Hitch part # C37CR is offered with longer brackets, part # C87CR. The brackets are a bit taller than you were looking for but could be cut down easily.
  view full answer...
• Recommended Universal Hitch for a 2021 Tiffin Allegro Red 340 38LL
  Yes, you are correct. You will want to go by the capacity of the lowest rated component to determine what your Tiffin Allegro Red has the ability to tow. We don't offer a custom hitch for your 2021 Tiffin Allegro Red 340 38LL, so you will need to use a weld-on universal hitch. I recommend the Curt Class 5 Universal Weld-on Hitch item # C37CR if the frame members are between 18" and 44" wide. If your frame is spaced wider, then you will want to use the Curt # C97CR which fits frame spreads...
  view full answer...
• Hitch For C5500 GMC Truck
  For a commercial vehicle such as the GMC C5500 you will need an universal hitch such as the Curt # C97CR Class-5, with 2-1/2” receiver, and fitting frame beams 18” to 62” in width with a 20,000 pound tow capacity. If you do not need one as wide you could select the 44” wide Curt # C37CR, or the 44” wide Curt # C99CR hitch with an 18” drop and 16,000 pound tow rating. I have included links to each of these items.
  view full answer...
• Trailer Hitch Recommendation for 2015 Tiffin Allegro Bus Motorhome
  We don't offer a custom hitch for your Allegro bus motorhome, so you'd need to use a weld-on universal hitch. I'd recommend the Curt # C37CR if the frame members are between 18 and 44 inches apart. If the frame spread is larger, use # C97CR which fits frame spreads up to 62 inches. Both hitches have a 2-1/2 inch receiver.
  view full answer...
• Recommended Trailer Hitch for a 2003 Chevy Express 3500 Cutaway
  Hey Mike, the closest I was able to find is the Class V Universal Weld-on Receiver Hitch # 15901. This is a universal trailer hitch that will fit frames ranging from 18" to 44", has a 15K capacity, and has 3" drop brackets. The other option would be to use the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR which has a 9" drop.
  view full answer...
• 20,000LB Trailer Hitch Receiver Options For a 2022 Tiffin Allegro Bus Motorhome With Tag Axle
  I do have some weld-on options for you as I unfortunately do not have any custom fit bolt on options and I cannot look at the detailed specs for your 2022 Tiffin Allegro Bus 45 OPP Motorhome. We have 2 sets of the Curt Class 5 receivers with either a 44" or 62" wide receiver tube which are all rated for up to 20,000lbs trailer weight and 2,000lbs tongue weight. You will need to select the correct width based on your frame and the amount of drop you will need to clear any rear fascia panels....
  view full answer...
• Universal Weld-On 2-1/2 Inch Trailer Hitch Receiver For 34 Inch Truck Frame
  We have an option for you, but the Curt Trailer Hitch Receiver # C15800 measures just under 34 inches wide from outside to outside and is a custom-fit option for 2001 - 2021 Chevy/GMC 3500 Cab & Chassis, as well as 2010 - 2021 Ram 3500, 4500, 5500 Cab & Chassis. So it will fit those trucks but otherwise I can't guarantee any fit. What you can use though, is a universal weld-on option, which will fit your 34 inch wide frame: - Curt Class 5 Universal Weld-on Hitch with Brackets - 2-1/2"...
  view full answer...
• How to Tell if Curt Hitch Will Fit 2008 Ford F-350 Cab and Chassis with Knapheide 6108D54J1 Body
  The Curt Trailer Hitch Receiver # C15845 is a custom fit application for a 2008 Ford F-350 Cab and Chassis like what you have. I'm not 100% sure what all comes on the Knapheide 6108D54J1 Service Body so I'm attaching a photo of some of the dimensions of this hitch for you to check out and compare with your truck body. If this doesn't work then the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR might be a valid alternative. This is also designed for service body vehicles but had...
  view full answer...
  
• Is There a Tow Hitch Available for a Freightliner M2?
  Though we do not have a custom fit option for your two Freightliner trucks, I may still have something that will work. I will say that both of these will depend on how wide the frame is where these would attach. The more heavy duty option will be the Draw-Tite Super Titan 4000 Weld-On Trailer Hitch with 3" Receiver Opening # 38124. This will have a 25,000 pound maximum capacity and comes with a ball mount, but will only fit frames that are 34 to 34 1/2 inches wide. If your frame is either...
  view full answer...
• Recommended Trailer Hitch for School Bus on 2005 Chevy Express 3500 Van Cutaway Chassis
  Your 2005 Chevy Express 3500 left the factory across the street from our facility as a Van cutaway chassis and was delivered to an upfitter that installed the bus body onto it and joined it with the cab portion of the van. Because there are many different upfitters, we have no way of knowing how the rear bumper is situated in regard to the frame, so it's very likely that the hitch that fits the passenger or cargo van models wouldn't be a fit, as their bumpers don't hang as low. We might...
  view full answer...
• Solution for Class V Hitch on 2011 Fleetwood Expedition Motorhome
  For hitch fabrication we only offer the receiver tube like the # E-11 or # C49511. You would need to take this to a local fabricator and they would be able to fashion a hitch and brackets that will fit your 2011 Fleetwood Expedition Motorhome. The other option would be to use one of the universal Class V hitches we have listed for your motorhome. We have the Curt # C47CR with a 9" drop and the Curt # C99CR with an 18" drop. Both options have a 2" receiver. The # C37CR and # C87CR are...
  view full answer...
• Compatible Hitch Fit for Ranch Hand Legend Aftermarket Bumper on 2009 Chevy Silverado 2500
  The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W # BWHDRH25187 which has a 6-1/2 inch drop. The drop is the vertical distance between the underside of the frame member and the underside of the bumper. If this distance on your truck is less than 6-1/2 inches, then the # BWHDRH25187 would be a fit. If that amount of drop isn't sufficient, you...
  view full answer...
• Is There a Class V Trailer Hitch Receiver For a 2000 Ford Excursion With 2-1/2" Receiver?
  Our only custom fit trailer hitch receivers we have for your 2000 Ford Excursion are the Curt Class IV # C14011 and Torklift Class V # TLF1006. The Curt has one 2" receiver while the Torklift has two 2" receivers. We do have a Curt Class 5 Universal Weld-on Hitch # C37CR with a 2-1/2" receiver opening. This will need to be taken to a shop to have welded onto your frame. They may need to add additional structure to strengthen your frame.
  view full answer...
• Trailer Hitch for 2022 Chevy Silverado 3500 With Harbor Service Body
  Because your service body truck is built on a Silverado 3500 Cab/Chassis, it has a narrower frame spread than trucks built as pickup trucks. Since the Torklift # TL74FR is built for the Silverado pickup, the hitch will be too wide to fit the frame of your truck, and wouldn't fit. This being said, we do offer hitches that are specifically designed to work on Service Body trucks. I'd recommend you go with the Draw-Tite Class V hitch, part # 41990-16. This hitch is a weld-on application with...
  view full answer...
• Do You Have a Aftermarket 2-1/2" Receiver For a 2012 Ford Expedition?
  I have some options for you as there is currently not a custom fit receiver for your 2012 Ford Expedition. First we have the 2-1/2" Curt Class 5 Universal Weld-on Hitch w/ Brackets # C37CR. You will be able to weld this onto the frame rails of your Expedition. Do note the basic design of this receiver as it will likely result in lower ground clearance. Otherwise we have the 2-1/2" Receiver Tube # 337RT255808 and Safety Chain Loop # E950 which you will be able to take to a welding shop...
  view full answer...
• Recommended Trailer Hitch Receiver for 2006 Ford E-350 Cutaway
  You may be able to use a custom fit hitch like the Curt # 14055 you looked at. In order to determine if this would fit or not you will need to measure the bolt holes from frame to frame. If they measure 38-5/8" then this hitch will work for you. Based on that 41-1/2" measurement to the outside there is a good chance this will work. If not, then the other option would be a more universal hitch like the # C13701. This fits frame widths from 18" - 51" which will be perfect for your application....
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?