Most Popular Kats Heaters
Videos
for Kats Heaters
Help Articles
for Kats Heaters
Expert Answers
for Kats Heaters
Yes, the Kat's Heaters Ether Start Fluid Injection System #KH33210 would still work if you didn't hook into the thermostat and would spray ether on each startup instead of only when the temperature hits below 50 degrees.
view full answer...The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to…
view full answer...I checked with Kat's about the correct engine block heater for your 2012 Toyota Tacoma with a 2.7L I4 engine, I confirmed that the correct fit is the Kat's Heaters Custom Engine Block Heater #KH11481. According to Kat's, this…
view full answer...We do have a battery heater designed for your Group 31 battery, part #KH22500, which has the same 60-watt rating as the other item you referenced. Heater #KH22500 DOES NOT have a thermostat; it will continue to warm the battery as long as it is…
view full answer...We do have battery heaters that will work for lithium batteries, though the only options we offer do require the wrap be plugged into a standard outlet, and are for use when the outside temperature is below freezing. If you have access to an outlet…
view full answer...Thanks for the picture of your wheel and valve stem setup. I'd recommend 135 degree valve extenders like the part #WM8029135 as this will put the valve stem at a better angle than a 180 degree kit. These will work great with your current wheel…
view full answer...There is not another way to power the monitor on your Voyager WiSight 2.0 so you'll need to add one with the 12 Volt Outlet Kit, 20 amps #RM-9332. This kit is going to add a 12V cigarette lighter to your 2024 GMC Sierra 2500 and will allow you to…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...For the 3.4L engine in your Tacoma, you'd want to use the #KH11482, which installs into the frost plug on the rear left of the engine block, per the diagram I've provided. The KH11813 won't fit your engine.
view full answer...As long as you clean the surface of the oil pan the Kat's Heaters Oil Pan Heating Pad #KH24150 is basically going to stick as long as you want it to. It won't wear out and fall off as the adhesive is very strong. The element of the Kat's…
view full answer...The Kat's Heaters Handi-Heat Magnetic Heater #KH1155 is usually installed onto the oil or transmission pan to keep the fluid warm. Nothing will need to be cut for use. It's also intended to heat small engines like that of a snowblower or…
view full answer...I checked with Kat's and the correct Kat's Heaters Custom Engine Block Heater for a Ram Promaster 1500 with 3.0 EcoDiesel is part #KH11455 which installs into the rear center "RC" location.
view full answer...
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"