Engine Block Heater for 2001 Toyota Tacoma w/ 3.4L Engine

Question

Question:

Will this part fit a 6 cylinder and where does it go?

asked by: Scott

0

Expert Reply:

For the 3.4L engine in your Tacoma, you'd want to use the # KH11482, which installs into the frost plug on the rear left of the engine block, per the diagram I've provided.

The KH11813 won't fit your engine.

expert reply by: Mike L

0

click to enlarge

Answer 1

The 3.5L V6 engine installed in your 2013 Toyota Sienna was used in several different modules. For example, the 2016 Toyota Tacoma has the same 3.5L engine as your 2016 Toyota Sienna. The Kat's Heaters Custom Fit Engine Block Heater part #KH11813…

view full answer...

Answer 2

The Kat's Heaters Custom Engine Block Heater part #KH11482 is the correct heater for the 3.0L V6 engine in your 2003 Toyota Highlander. The block heater is a frost plug style heater meaning it's designed to replace one of the factory…

view full answer...

Answer 3

I confirmed with the manufacturer that Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 will indeed fit your 2021 Toyota Tacoma V6. This installs very simply as you can see in the attached demonstration…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Your Tekonsha Prodigy P3 #90195 on your 2004 Toyota Tacoma is showing no trailer connected because you only have the 5-Way flat connector on your trailer. The 5-Way carries the basic trailer light functions and that 5th pin is typically for the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Tom, the #ETBC7 kit is exactly what you will need to install a 7-way on your 2004 Toyota Tacoma TRD V6 with the factory 4-flat plug. Here are the answers to your questions: 1. Yes. The kit includes quick splice connectors which make this easy. I…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Engine Block Heater for 2001 Toyota Tacoma w/ 3.4L Engine

Product Page this Question was Asked From

Continue Researching