Kats Heaters Custom Fit Engine Block Heater Review Video

I checked with Kat's and the correct Kat's Heaters Custom Fit Engine Block Heater for a 2019 Kia Sportage with 2.0 or 2.4 engine is part #KH11812.

The Kat's engine block heater #KH11813 installs in a cartridge hole on the engine block. Once you locate the cartridge hole, clean the hole of all debris. You can use compressed air. You don't need to open the coolant system because…

There is definitely a roof rack fit for your 2015 Hyundai Santa Fe Sport, and I appreciate the photo, which shows you have a naked roof. And for your roof I recommend going with Rhino-Rack because it is the best value for a roof rack;…

You can flat tow a 2000 Nissan Frontier 4x4 with a manual transmission with speed restriction of 60 mph. If you have the automatic transmission, you can flat tow if you use a drive shaft coupling disconnect. We do not carry this product, but I can…

The Kat's Heaters Custom Fit Engine Block Heater #KH11814 is confirmed to fit your 2013 Jeep Wrangler Sport with a 3.6L V6 engine.

Yes, the correct engine block heater we have for a 2016 Chevrolet Colorado Z71 with 3.6L V6 is the Kat's Heaters Custom Fit Engine Block Heater part #KH11811. The block heater simply plugs into an existing hole in the engine block and will not…

I checked with Kat's and the Kat's Heaters Custom Fit Engine Block Heater #KH11813 that fits your 2013 Lexus RX 350 will install in the left front position, as indicated in the cut out of the manual I attached. Kat's does recommend…

I checked with Kat's and the correct location to install the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 on a 2014 Chevrolet Impala Limited with 3.6L V6 Engine is on the rear left side of the engine as you can see in the…

Yes, there is. The Kat's Heaters Custom Fit Engine Block Heater, #KH11811 is a confirmed fit for the 2022 GMC Canyon with a 3.6L V6 Engine. This cartridge-style heater simply clips into the cavity of your engine block. There is no need to remove…

I checked with Kat's about the correct engine block heater for your 2012 Toyota Tacoma with a 2.7L I4 engine, I confirmed that the correct fit is the Kat's Heaters Custom Engine Block Heater #KH11481. According to Kat's, this will install…

The cartridge to use to install the Kat's heater part #KH11812 that you referenced is on the front side of the engine on the passenger side as you face the engine with the hood up.

To install a new lock core into the #8890256 you'd need to use the change key part #Y8007835 inserted into a new lock core part #Y8771-A144 and then the matching key is part #Y8772-A144.