bing tracking image
  1. Trailer Lights
  2. Blazer
  3. Tail Lights
  4. Square
  5. LED Light
  6. Red
Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side

Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side

Item # C7493RTM
Retail:$74.99
Our Price: $26.67
You Save: 64%
Trailer Lights
Shipping Weight: 0.72 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
4-3/4" x 5-1/8" Square. Waterproof LED trailer light serves 6 functions: brake, turn, tail, side marker, side reflex, and rear reflex. Surface mount with included hardware. 3-Wire design. Great Prices for the best trailer lights from Blazer. Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side part number C7493RTM can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (41)
  • Q & A (0)
  • Photos

Blazer Trailer Lights - C7493RTM

  • Tail Lights
  • Square
  • LED Light
  • Red
  • 4-3/4L x 5-1/8W Inch
  • Surface Mount
  • Rear Reflector
  • Side Marker
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Blazer

4-3/4" x 5-1/8" Square. Waterproof LED trailer light serves 6 functions: brake, turn, tail, side marker, side reflex, and rear reflex. Surface mount with included hardware. 3-Wire design.


Features:

  • Square LED trailer light serves 6 functions on trailers under 80" wide
    • Stop light, tail light, turn signal, side marker, side reflex reflector, and rear reflex reflector
  • Submersible light is great for boat trailers
    • Epoxy-sealed lens blocks moisture and corrosion
  • Built-in reflector removes the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Lasts 50 times longer
    • More efficient - provide better light with less power
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Compatible with 12V DC systems
  • Surface mount with included studs
    • Mounting studs can attach to rear or side of light
  • 3-Wire pigtail
    • White wire for ground
    • Brown wire for tail light
    • Green wire for stop/turn signal
  • SAE and DOT compliant
    • Meets FMVSS 108 and CMVSS requirements for automotive lighting


Specs:

  • Configuration: passenger side
    • Driver side: C7483RTM (sold separately)
  • Dimensions: 4-3/4" tall x 5-1/8" wide x 1-3/4" deep
  • Distance between mounting studs (center on center): 2"
    • Side position (center on center): 1-1/2"
  • Diodes: 7
  • Power draw at 12.8V: 0.4 amps
  • 1-Year warranty


Blazer LED Combination Tail Light Dimensions Dimensions

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



C7493RTM Blazer LED Trailer Combination Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side - Right Hand





Customer Satisfaction Score:


Customer Reviews

Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side - C7493RTM

Average Customer Rating:  4.8 out of 5 stars   (41 Customer Reviews)

4-3/4" x 5-1/8" Square. Waterproof LED trailer light serves 6 functions: brake, turn, tail, side marker, side reflex, and rear reflex. Surface mount with included hardware. 3-Wire design.

by:

Better than the ones that came with the trailer.



by:

The lights were delivered timely, appear to be well made, work correctly and are bright. So far, I'm pleased.



by:

Good price, good product. After 1 year light is just like it was the day I installed it. The old trailer lights bulbs were always coming loose and with this LED unit everything is working all the time. I strongly recommend this product, it's the best upgrade available.



by:

Nice, bright lights! Each trailer is easy to work with, with great videos, even advice and awesome customer service. Lights were easy to install, and don’t shatter when they get wet.



by:

Perfect replacement for my broken trailer light, awesome!

Robert W.

6/10/2019

Still working great, all LEDs are still working



by:

the right fit. look good on my trailer. installed easily. some wires attached did not seem to led anywhere. but customer service was a help



by:

ordered the lights to replace stock lights that keep blowing bulbs, these were priced right and easy to install. best part they are totally water proof. and draw a lot less battery than standard lights. thanks etrailer.



by:

Consistently reliable, much more so than the ones that originally came with the trailer.



by:

The parts that were delivered were exactly what I expected, they fit very well & seem to be made to last many years. With one exception, the bushings with the 1/2" bore fit loose within the eye of the leaf spring. The pricing was very competitive. Delivery was prompt and on time.



by:

Great product; easy to install; no more lightbulb and socket issues to worry about; very dependable;



by:

Great customer service...I was able to track my order from beginning to delivery and etrailer provided e-mails to ensure I received my order.
Thanks for excellent service...I will shop and purchase again from etrailer.



by:

No problem at all. Wil continue to use your company for trailer needs



by:

Great product. Fast shipping. Fair pri cing.



by:

Found exactly what I was looking for very quickly, purchased the product with minimal effort, they shipped it promptly and I got exactly the product I needed at a very good price in a very short period of time. Good Job - I will be back.



by:

Everything came as ordered and worked as it should! With tons of experience where that wasn't the case, I never take it for granted. 5 Stars!



by:

awesome product. Very happy with the purchase.



by:

Order came right on time, very pleased with the product, highly recommended supplier!



by:

easy to install. bright lights



by:

Exactly what I ordered. Quality at a great price.



by:

This product was as stated. Arrived early. Wired it up. Worked great. Very satisfied.



by:

Still using. Working great.



by:

Works perfectly



by:

easy to find anything i need , great price and service. no need to go anywhere else,fast delivery.



by:

It perfectly matches the other side.



by:

thanks for the fast service MCR.


25
41
Show More Reviews

See what our Experts say about this Blazer Trailer Lights

  • Is Bulb of Blazer Trailer Tail Light # C7493RTM Replaceable
    The Blazer Trailer Tail Light # C7493RTM is an LED assembly which means that the bulb isn't replaceable, but due to how long LEDs last you really wouldn't have to worry about that. Unlike incandescent bulbs LEDs last a very long time so they aren't designed to be replaced.
    view full answer...
  • Operation of Blazer LED Tail Lights
    Thank you for the details. I reached out to my contact at Blazer International to ask about the Blazer Trailer Tail Light - 6 Function - LED - Submersible - 7 Diodes - Red Lens - Passenger Side # C7493RTM you referred to. I confirmed with them that 2 LED's on is that proper function for running lights and all the LEDs for turn signals. Based on the information you gave, your light is working properly.
    view full answer...
  • Troubleshooting Blazer Trailer Tail Light C7493RTM That Stopped Working
    First check to make sure the light is grounded properly. That is typically what causes a trailer light to stop working. Especially when the light is an LED that doesn't normally burn out. The light # C7493RTM that you referenced has a sealed lens that does not allow you to get into it. Plus the LED light inside it is not like a standard bulb that is easily replaced. Try improving the ground first. That will most likely fix the problem. I attached a couple help articles on troubleshooting...
    view full answer...
  • Troubleshooting Trailer Wiring Where Blinkers Only Work with Headlights Off
    Sounds like your issue is that you have the running light circuit wiring ran to the brighter stop/turn illumination circuit of the lighting. So what you'd want to do is reverse the wiring of the two circuits. Either at the connector or at the lights (whichever is easiest) and you'd have the issue handled!
    view full answer...
  • Troubleshooting Trailer Lighting That All Blinks When the Right Turn Signal is Applied
    Sounds like you have the running light circuit of your trailer wiring shorted out or ran to the right turn signal circuit which is causing all of the lights to blink when that circuit is activated. I'd go over all of the wiring of the trailer and clean up any connections or exposed wire as needed.
    view full answer...
  • Troubleshooting Trailer Running Light Circuit Not Functioning
    Try connecting a known working 12 volt power source to the brown wires of the Blazer LED Trailer Tail Light # C7493RTM that you referenced. This is the running light circuit. If the light does not come on then the assembly is the problem but if it does then you know it's the wiring that runs to the assemblies. You should also verify that the white wire is connected to a solid ground too as that can sometimes cause lights not to work.
    view full answer...
  • Can Blazer C7483RTM and C7493RTM LED Trailer Lamps Be Mounted From The Side
    Both the Blazer # C7493RTM for the passenger side and # C7483RTM for the driver's side can be mounted using the slots molded into the rear or the inboard side of the lamp housing. I've provided photos of both lamps showing the slots in the side of the lamps. The photos we use are taken in-house using the actual parts. I've also linked to an install video that you might find helpful.
    view full answer...
    Image 1 for
  • Interchangeability of Trailer Taillights Left and Right Assemblies
    I can see the possibility of 2 issues presenting themselves. First would be the mounting brackets. If they are offset the bracket may not be able to fit your mount. Or if the lights are only designed to slide on one direction like the Blazer LED Trailer Tail Lights # C7483RTM and # C7493RTM. If the bolts were to loosen the light could slide off the bolts and be dragged by the wiring. Second is if the lights have a weep hole to release any water that would accumulate in the lens. When...
    view full answer...
  • Replacement For Wesbar 50010 Tail Lights on Boat Trailer
    The Wesbar 50010 are approximately 4-1/2 inches square, so the best option to replace them will be similarly sized LED tail lights: - Driver Side: Blazer LED Trailer Tail Light # C7483RTM - Passenger Side: Blazer LED Trailer Tail Light # C7493RTM These are submersible lights that have mounting studs that measure 2" apart on center, and have a 3-wire pigtail (ground/tail/stop & turn).
    view full answer...
  • Replacement Blazer Driver Side LED Trailer Tail Light Assembly
    The Blazer Trailer Tail Light # C7483RTM referenced in your question is the only driver side assembly from Blazer that we currently have available. The pictures of your existing unit did not come through for some reason so I'm not sure exactly what your assemblies look like, however the lens on this light does feature individual circular patterns for the LEDs within the large outer circle. I have attached an image to better clarify this. I have also attached an installation video that...
    view full answer...
    Image 1 for
  • 2012 Jeep Liberty Headlights Cause My Trailer Turn Signals and Brake Lights to Fail
    It sounds like there may be a couple of issues going on here. First, It is very common for LED lights like # C7493RTM & # C7483RTM to remain on very dimly whenever the trailer is connected to a vehicle, even if the ignition is turned off. The only solution is to disconnect your trailer when you will be parked for extended periods. Now let's address the bigger issue. When turning on the vehicle's headlights causes one or more of the trailer lights to stop working the number one culprit...
    view full answer...
  • Troubleshooting Peterson Tail Lights on Boat Trailer That Keep Burning Out
    It really all depends on what trailer light kit you have installed on your boat trailer. Some kits are designed to withstand submersion and other kits aren't. If you can let me know what kit is on your trailer (not just the type of bulbs you use) I can help you determine if it is submersible (granted we carry it). Another thing to note is that you need to make sure your trailer wiring is unplugged before backing the trailer into the water. Even if your lights are submersible, if you don't...
    view full answer...
  • Is it Okay to Drill Hole in Back of Optronics Light as Means for Wires to Exit?
    You could drill a small hole in Optronics Tail Light # STL8RB, though it would almost certainly void the warranty. I may have a better solution for you with Blazer Tail Light # C7493RTM. This light is also a red, square, LED light with mounting studs 2" apart on center. However, the wires in the rear of this light exit in the middle so there would be no need for you to drill any holes or make modifications. I've added a photo of the back of this light so you can see where the wires exit,...
    view full answer...
    Image 1 for
  • Square Trailer Taillight Recommendation that Can have Longer Mounting Studs Used
    You'll want the taillight part # C7493RTM if you are wanting a light that allows you to pick the length of the mounting hardware you'd need. There's no way to replace the studs of the light you mentioned. I attached an install video for you to check out as well.
    view full answer...
  • Replacement Trailer Taillight Lens for Blazer DOT AIST 95
    The lens you need is part # A8RB. The light you have is a standard style trailer taillight and the lens part # A8RB is designed to fit it.
    view full answer...
    Image 1 for
  • Recommended Blazer LED Submersible Boat Trailer Tail Lights Installation
    For the Blazer Trailer lights, you will want the Blazer Trailer Tail Light - 6 Function - LED - Submersible - 7 Diodes # C7493RTM for the passenger side and the Blazer Trailer Tail Light - 7 Function - LED - Submersible - 9 Diodes # C7483RTM for the driver's side. That 7th function and the extra diodes are for the license plate light. These two parts are designed to be a pair. The installation video I've included will show you how to mount these lights and you will want to use the Deka...
    view full answer...
  • Does GloLight LED Combination Trailer Tail Light STL161RLB Have Built In Side Marker Light?
    The GloLight LED Combination Trailer Tail Light - 5 Function - Submersible - 39 Diodes - Driver Side # STL161RLB you were looking at does not have a built in side marker light, so you would need to add a side marker light using # 328-K-52. Another option would be to use the Blazer LED Trailer Tail Light - Submersible - 6 Function - 7 Diodes - Red Lens - Passenger Side # C7493RTM and Driver Side # C7483RTM instead which do have the built in side marker lights. I included videos of the...
    view full answer...
  • Upgrading Tire Speed Specs and LED Submersible Tail Lights on an Ultra-Tow Aluminum 4x8 Trailer
    I have the perfect solution for you with the Taskmaster 4.80-12 Tire # TT48012C. This tire has a Load Range C (990 lbs at 90 psi) weight capacity per tire and can travel safely up to 81 mph so it definitely fits the bill! If you need to replace the wheel as well then I recommend checking out the Dexstar Mini Mod which comes in Black # DEX44FR or White # AM20140 depending on what style you'd like for your trailer. When it comes to the lights I recommend checking out the Blazer lights...
    view full answer...
  • Recommended 24 Volt Compatible Trailer Lights for Utility Truck
    We do have some 24 Volt lights, but the Blazer Trailer Tail Light - 6 Function - LED - Submersible # C7493RTM is only for 12 Volt systems. Here are some 24 Volt options: Miro-Flex LED Trailer Stop/Turn/Tail Light - 12 Diode, 24 Volts - 4" Round - Red # STL23R24B Miro-Flex LED Trailer Parking/Turn Signal - 16 Diode, 24 Volts - 4" Round - Amber # STL23A24B
    view full answer...

Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Amy B
Updated by:
Amy B
Employee Alexander C
Updated by:
Alexander C
Employee Daron K
Updated by:
Daron K
Employee Brian T
Updated by:
Brian T
Employee Carrie F
Updated by:
Carrie F
Employee Tammy D
Written by:
Tammy D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.