Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.
Features:
Specs:
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.8 out of 5 stars (185 Customer Reviews)
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.No problems or issues with quality. Assembly went well. The price was fair and shipment was packaged excellently. Freight was a little slow, possibly due to Covid or product shortage and across nation travel.
No problems with assembly due to attached paperwork.
Very good results.
Thank You.
I can not say enough about how good your product is! The installation went very smooth.
I would highly recommend your product.
It was great to see that everything comes with it right down to the grease.
I bought two of these axles to replace 2 off brand ones that needed brakes, hubs and bearings. These were only slightly more expensive, and got me to a name brand. The kit came with actually extra axle nuts, and you have to assemble the brakes and hubs yourself, which was no problem. I had two slight issues. The first was that one of the brake wires that travels through the axle had a tiny bit of damage, exposing the actual copper wire itself, however there was plenty of wire left to fix this. But it would definitely be a failure down the road if I didn't see it when installing. The second problem I had was more of a shipping issue. They include a tube of grease in the box that has both hubs and breaks in it, the plastic cap of the grease tube opened up, and coated everything and damaged the box to the point that it literally opened up on the poor UPS carrier at my door, dumping the contents on the ground, however shipping issues aren't the main focus of the review, and it only happened to one, not the other axle's box. Thankfully, everything I ordered is tough enough that it was not bothered. Overall, this was an excellent solution to my problem, and I called to order this to double check what I read on the site, service was great, order processed quickly! I will come back for future needs!
Great axle kit, very easy install was able to swap this in the day it arrived to my home. One thing to recommend is buy new U bolts you will be glad you did
It. Was good timeing
Great axle. I used it as a replacement. It fit perfectly and installed easily. One parts bag was missing (packed at Dexter, I presume), but when I let etrailer know, they sent the parts asap.
Absolutely great customer service!! Too notch company and people to work with!!
Very helpful and great service! Thanks !!
I received my order in good condition, but that is all I can say about it, since the temp here is 0 deg and I have to work on the trailer outside. So nothing will be done with the parts until warm weather is here.
great products and service I will be buying from them again. Etrailer is the best
Great product. Easy installation.
Worked and fit great.
Bruster
9/10/2021
Works Great As it should
Great to deal with
Cust service was nice and helpful. First packages came in under expected time. Wish the beams for axels were packaged, however they are fine, it’s metal! All and all worth the price.
Perfect size, easy to install. Fast delivery and great customer service. Will buy again and recommend to friends and family.
great product! although i was under the impression that the axle would come assembled. other that that i am happy with the purchase and price.
great service
Do you have a question about this Trailer Axle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
5/15/2020
Great took the trailer to AZ this last year no problems.