bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Three Wire
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

Item # A47PB
Retail:$7.95
Our Price: $5.94
You Save: 25%
Accessories and Parts
Shipping Weight: 0.05 lbs
Add to cart
In Stock
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead Right Angle Pigtail A47PB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights. 1-800-940-8924 to order Optronics accessories and parts part number A47PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (541)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A47PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Three Wire
  • Optronics
  • Right Angle Pigtail
  • 10 Inch Long

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights.


Features:

  • Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Red wire for turn signal
  • #10 Ring terminal on ground wire
  • Wire length: 10"


dimensions of pigtail

Pigtail is a direct replacement for:

  • Uni Bond PT9530
  • Truck Lite 94993
  • Grote 66843-3
  • Peterson 421-491


A47PB Optronics PL-3 Right Angle 3-Wire Pigtail for Trailer Stop, Turn, and Tail Lights

Alternate part number: A-47PB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead - A47PB

Average Customer Rating:  4.8 out of 5 stars   (541 Customer Reviews)

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights.

by:

Definitely made wiring the lights an easier task as I completely forgot about the wiring harness until the lights showed up and had to go back and order them. Added new brake, turn lights, as well as back up lights to both sides on the boat.

Michael E.

8/24/2021

Work great! Super bright and recommend the items to others. Have almost replaced all the lights on the entire trailer with your products. Thanks again!



by:

Good choice for connecting up your oval lights. Would definitely purchase again!



by:

Restoring a 1991 2 horse trailer. etrailer had all the exact lights made by Peterson, 35 years later.



by:

The right-angle pigtail plugged into the LED light properly, making
a solid connection



by:

works great for my trailer



by:

The space behind the Optronics tail lights I chose for my concept Lotus T66 Europa is extremely tight. Normal connectors that bring wires straight off the back wouldn’t fit. This connector brings the wires out at a 90° angle, keeping them close to the housing. It made installation a simple matter.

Bruce F.

2/8/2020

Of all the lights in my BritishFrench car, these are the only ones that have given me ZERO issues. They are fully enclosed, fully sealed with rock solid connections. Made for trucks but look awesome on a 40” high concept race car.



by:

Timely service with an exact replacement just as stated on the website.



by:

Always happy with etrailer



by:

Top quality water tight connectors



by:

I was easily able to locate the trailer lights I required on this excellent website. Delivery was fast and the product was excellent. Thank you!



by:

Ordered the pigtails, lights and grommets to add additional lights to my cargo trailer I pull behind my motorcycle. These lights were easy to install, the wiring worked great with my already wired lights. The lights work great and are easily seen. Great product and would definitely buy again. This pigtail made wiring the lights quick and easy.



by:

Everything worked very well together. Sorry I don't have picture of lights in action attempted to upload a short video but site would not accept it as a valid file type. Just let me say guys riding behind me don't wanna be to close when it is dark out cause all they see is red!

Randall

7/30/2017

Wonderfully



by:

Plugs were pr-greased which was nice!



by:

I have purchased scores of products online over the years, but this experience was by-far the best. Your website is well organized, well informed, and easy to navigate. The purchasing process went very smoothly, and the products that I purchased were competitively priced. The shipping and delivery was faster than estimated (and frankly, faster than I expected). The shipment arrived well packed, undamaged, and the contents were exactly as advertised. Thank you etrailer.com for a great experience...I'll be back to purchase again!



by:

Worked great



by:

Good fit and materials, although the splice into an extension to plug directly into a standard 4 pole flat trailer hitch connector, was trial and error to get the correct functions of the light.



by:

Great Company, great product great price. Can’t beat the service !!



by:

Works as advertised.



by:

Harness fit LED Trailer light perfectly.



by:

The connecter went together just like the original. It has working ever since I install last year.



by:

perfect fit



by:

Pigtails were of good quality but note that using them may require a hole of about 1 and 1/8



by:

All my trailer parts for a new build keep coming in from etrailer , my go to online store. Everything needed for building and maintaining trailer etrailer has. I have been dealing with etrailer for several years now and have never been disappointed.



by:

Just the plug I needed! Using it for my boat trailer and did not want to have to order through the dealer. Great service and speed.



by:

This fit onto the back of a Ranger Trail taillight assembly.


25
541
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Is Optronics LED Trailer Tail Light # STL42RB Sold Individually or In Pairs
    The Optronics LED Trailer Tail Light # STL42RB is sold individually. If you needed a pair you'd need to order a quantity of two of these. For a wiring harness you'd then need the part # A47PB and for a mounting bracket part # BK45BB and you'd be set.
    view full answer...
  • Flush Mount Stop Turn and Tail Lights for a 1982 13 Foot Scamp Travel Trailer
    I did a bit of research on your trailer and the reflect-o-lite light that you mentioned. It looks as if they are surface mount lights that are 6-7/8 inch diameter. For a replacement you could use the 7 inch round Transit LED Stop/Side Marker/Tail Light, # STL90RB, to have a somewhat original appearance, with an upgraded LED light. You could also use a surface mount like the I recommend the Dual LED Trailer Tail Light - Stop, Turn, Tail, Backup - Red and Clear Lens # CE86FR by Command electronics,...
    view full answer...
  • Solution for Installing Optronics LED Trailer Tail Light on Trailer With Round 3-Prong Light Plug
    The Optronics LED Trailer Tail Light # STL43RB is only available with this plug style. We do not carry the GROTE brand or have any lights like this that match the round plug. However, a simple solution would be to cut off your existing plug and use the # A47PB or # A45PB.
    view full answer...
  • LED Tail Lights for a Ranger Trail XT188 Boat Trailer
    I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light # STL22RB is a great option for an LED upgrade. These lights use pigtail # A47PB and will fit the mounts currently on the trailer. If your trailer has different tail lights, such as those that hang from studs then # STL16RB and # STL17RB are great options for that mounting style. If neither of the recommendations above are the light style or...
    view full answer...
  • Black Rubber Grommet for 4 inch Round Trailer Lights A45GB Mounts in a 4-1/2 inch Diameter Hole
    The Black Rubber Grommet for 4 inch Round Trailer Lights, part # A45GB, mounts in a 4 1/2 inch diameter hole. This grommet will work with the Sealed 4 inch Round LED Trailer Light, part # STL23RB, and should work with your fiberglass application. The light, grommet, part # A45GB,wiring, part # A45PB, and wiring, part # A47PB, are all sold separately.
    view full answer...
  • Clear Submersible Marker Light to Replace Light on Boat Trailer Used as Reverse Light
    A license plate light such as # LPL91CB could work for you. It is 2-1/2" x 1-1/4". For something a little larger you could use # UCL65CB with mounting bracket # A65PB. The light is 4" long x 1-1/4" wide x 1" deep. We do have actual reverse lights, such as # BUL10CB, which is submersible. You would need to use pigtail # A47PB and a mounting bracket, # BK70BB, with grommet # A70GB for installation though.
    view full answer...
  • Wiring For A Flat Bed With Aftermarket Lighting On a 2008 Ford F-150
    I only have one recommendation as we do not carry a factory connector for the tail light harness on your 2008 Ford F-150. If your truck has a 7-way you will be able to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 to tee off of the 7-way. You will then be able to splice the wiring and wire in Tail Lights # BP53FR and Clearance Lights # M181A. You will need the 3-Wire Pigtail # A47PB and 2-Wire Pigtail # 421-49 to wire in the tail lights. They will also...
    view full answer...
  • Trailer Wiring and Lighting Replacement for Trailer with 4.5 inch Red and 2.5 inch Amber Light
    For a 4-1/2 inch diameter trailer taillight that can do stop/tail/turn functions we have the part # STL43RB which would work well. For a rubber grommet then we'd need the part # A45GB. Then for a pigtail harness you'd need the part # A47PB. For the 2-1/2 inch amber lights you'd want the part # MCL59AB and for a grommet for this you'd need part # A55GB. For a pigtail for this you'd want part # A46PB. Then for 4-way wiring sold by the foot you'd want the part # 16-4B-1.
    view full answer...
    Image 1 for
  • Cut Out Size for Grommet to Install Amber Side Marker Light STL75AB
    To flush-mount install the Optronics LED Side Marker Light and Mid-Ship Turn Signal # STL75AB you will need to use PVC Grommet # a70gb which requires a 7-5/8" wide x 3-3/8" tall hole, as you can see in the cut out I added of the dimensions of this grommet. You will also need 3-Wire Pigtail for Optronics Trailer Lights # A47PB to complete your installation; this pigtail plugs into the light so you can wire it to your trailer. I have added links to video reviews and installs for you to...
    view full answer...
    Image 1 for
  • Replacement Optronics 5-1/2 Inch Diameter Round LED Trailer Light
    I think the part number you have on your trailer is part # STL42RB. The other numbers may be a serial number or another number for a mold or something else. The best way to see if our light is the exact replacement is to check the specs and the mounting of the # STL42RB. The light has 10 LEDs and uses a 3-prong plug like part # A47PB for the right angle plug or part # A45PB for the straight plug. The dimensions of this light are 5-1/2 inch diameter and 1-15/16 inches deep. The mounting...
    view full answer...
  • Recommended Oval Lights, Grommets, and Wiring for a BACKRACK Headache Rack for Pickup Truck
    I'd be more than happy to help! Here is what I found: Red - # STL111RB (x2) Amber - # STL111AB (x2) White - # BUL111CB (x2) PVC Grommet - # a70gb (x6) Pigtail - # A47PB or # A45PB (x6) These lights all match and measure 6-7/16" wide x 2-5/16" tall x 15/16" deep but the grommet will take up the rest of the space that you measured. Just be sure to only connect 1 of the wires for each function depending on how you're wanting it all to operate. I have attached a sample installation video...
    view full answer...
  • 4 Inch Round Trailer Tail Light Cutout Size
    The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light # BUL43CB or Trailer tail Light # STL55RB which are actually 4-5/16" diameter x 1-15/16" thick. These are designed to fit the Rubber Grommet for 4" Round Trailer Lights - PVC # A45GB which requires a 4-1/2 inch diameter cutout. You will also need wiring pigtail # A47PB. If you are interested in the Optronics Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens # ST40RB you asked from...
    view full answer...
    Image 1 for
  • Replacement Option For Glo-Brite 9891-88 LED Trailer Tail Light
    We do have an option for you to replace your Glo-Brite 9891-88 LED trailer tail light. Based on my research this is a 4 inch round LED tail light that uses a 3-wire plug and fits in a 5-1/2 inch grommet. We have exactly that with the following light: - Optronics LED Trailer Tail Light # STL42RB This comes with the grommet, which has mounting holes separated on center by 4-1/4 inches, so the only other thing you will need is the 3-wire pigtail, and you can choose from a standard or right...
    view full answer...
  • Grommet And Wiring For Optronics STL72RB Light
    I took a look at your Optronics LED Trailer Tail Light # STL72RB, and the only grommet I was able to find that fits this light, is the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # a70gb that you mentioned, unfortunately. Additonally, to complete install of # STL72RB you're also going to need either the Right Angle 3-Wire Pigtail for Optronics Trailer Lights # A47PB or the 3-Wire Pigtail for Optronics Trailer Lights # A45PB, depending on the orientation needed.
    view full answer...
  • Replacement 3-Wire Pigtail For Tail Light On 2011 TrailStar Boat Trailer
    We offer a couple different 3-way pigtails that are typically used for a sealed trailer tail light that may work for you. The first is a right angle 3-wire plug, part # A47PB. It has three wires, a red, black, and white. The red is a turn signal, the black is the tail signal and the white has a ring terminal on it and is designed to be the ground that needs to be attached to a clean metal surface. The 3-way plug is designed to plug into the back of a sealed light. For a straight 3-wire...
    view full answer...
  • Can Trailer Taillight STL55RB Replace Incandescent Bulb on Older Vehicle
    If you wanted to install the # STL55RB in place of the bulb you have now on your vehicle you certainly could but there isn't a direct adapter available. You'd basically need to remove the socket you have now so that you could wire the harness part # A47PB to it which is what plugs into the # STL55RB.
    view full answer...
  • Availability of 3-Pin Pigtail Wiring Connectors for # 98174LED Cargo Carrier Light Kit
    Are you needing the pigtail that will plug into the lamps? If so, a right angle pigtail is available as part # A47PB. A straight plug is also available as part # A45PB. If you're looking for a female socket that will accept the existing plugs to make an extension, Optronics doesn't offer such a part. If you need do some cutting and splicing, I'd recommend soldering your connections and protecting the connections with heat shrink tubing like part # DW05451.
    view full answer...
  • Parts Needed for Connection and Installation of the Sealed Oval Trailer Stop Turn and Tail Light
    Yes, the Sealed Oval Trailer Stop Turn and Tail Light, # ST70RB, can be installed on a trailer with a two wire system that has 3 function tail lights and Stop/Turn signal. You will need a pigtail to connect to the light and your trailer wiring. There are two options available, straight, # A45PB, and 90 degrees, # A47PB, see links. You may also need a grommet, # A70GB, and may need a Mounting Bracket, # BK70BB, to install these lights on your trailer. I produced a short video showing...
    view full answer...
  • Optronics LED Trailer Tail Lights with 3-Prong Plug
    For an LED-version of the Optronics light # ST66RPG you can use their parts # STL37RB and # STL36RB. These do not include the 3-prong plug but we offer these, right-angle part # A47PB and straight plug part # A45PB.
    view full answer...
  • Availability of Bracket Mounted Utility Light to Use as Interior Light for Trailer
    For an exterior light solution I would use the Sealed, 6-1/2 inch LED Clear Oval Trailer Utility Light, 10 Diode, item # BUL72CB, along with the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and the Trailer Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, Steel - Black Powder Coat, item # BK70BB. You'll also need the pig tail part # A47PB.
    view full answer...
  • Wiring Installation Into the Custer Light Mounting Box # AL65-02
    For the Custer Light Mounting Box - (2) 6-1/2" Long Oval Holes - Diamond Plate Pattern - Aluminum # AL65-02, you will use the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB with lights like # STL22RB or # STL22AB. These lights use a pigtail like # A47PB or # A45PB. You will need to drill holes in the housing to mount and add a hole for the wiring as well. I recommend using a the Snap Bushing Grommet - 7/16" ID, 9/16" OD # SWC8055 or the Replacement Flush Mount Rubber Grommet...
    view full answer...
  • Parts needed to Wire a Boat Trailer With Led Lights and a 4-Way Towed with a 2008 Toyota Tacoma
    To use the Optronics Trailer Lights, item # STL22CCRB, on your boat trailer you will need several parts. I will list them below. 2 each Optronics Trailer Lights, item # STL22CCRB 2 each Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB 2 each Right Angle 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights, item # A47PB 2 each Mount Bracket for 6-1/2 inch Oval Trailer Tail Light - Stainless Steel, item # 337LB1SS 1 each 35 ft. Wishbone 4-Way Trailer Wiring Harness...
    view full answer...
  • Functions of the Three Wires on Trailer Taillight Harness A47PB
    Our three wire lights like what the harness part # A47PB is designed to fit have the white wire as ground, the black wire for tail light, and the red wire for stop/turn signal. That covers all of the standard trailer taillight functions.
    view full answer...
  • What is the Wire Gauge for Right Angle 3-Wire Pigtail # A47PB
    I went out to the warehouse to check the wire gauge on Right Angle 3-Wire Pigtail # A47PB. Each of the 3 wires is 18 gauge. At 10 inches in length 18 gauge automotive-grade wire can handle a maximum of approximately 15 amps which is much more than any light that it goes with pigtail A47PB.
    view full answer...


< Previous
123. . .8



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Andrew S
Installed by:
Andrew S
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.