bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Square
  5. Incandescent Light
  6. Red
Combination Trailer Tail Light - 7 Function - Incandescent - Square - Red Lens - Driver Side

Combination Trailer Tail Light - 7 Function - Incandescent - Square - Red Lens - Driver Side

Item # ST9RB
Retail:$28.31
Our Price: $9.94
You Save: 65%
Trailer Lights
Shipping Weight: 0.47 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
5-3/16" x 4-9/16". Incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light. Shock-proof sockets protect bulbs. Stud mount on trailer. Quick connect wiring. 2 bulbs. Great Prices for the best trailer lights from Optronics. Combination Trailer Tail Light - 7 Function - Incandescent - Square - Red Lens - Driver Side part number ST9RB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1328)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - ST9RB

  • Tail Lights
  • Square
  • Incandescent Light
  • Red
  • 5-3/16L x 4-9/16W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Side Marker
  • Side Reflector
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

5-3/16" x 4-9/16". Incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light. Shock-proof sockets protect bulbs. Stud mount on trailer. Quick connect wiring. 2 bulbs.


Features:

  • Square incandescent trailer light serves 7 functions for trailers less than 80" wide
    • Stop, Turn, Tail, Rear Reflex, Side Marker, Side Reflex and License Plate Illuminator
  • Built-in reflector removes the need for a separate reflector
  • Shock-proof sockets protect bulb against damage
  • Incandescent bulbs are easy to replace
  • Durable plastic housing with screw-on lens
  • Red lens over incandescent bulbs
  • Compatible with 12V DC systems
  • Stud mounts to trailer - hardware included
  • Quick connect wiring: simply insert stripped wire into holes for a secure connection
    • Light grounds through mounting studs
  • DOT compliant


Specs:

  • Configuration: driver side
    • Passenger side: ST8RB (sold separately)
  • Dimensions: 5-3/16" long x 4-9/16" tall x 2-7/8" thick
  • Distance between mounting studs (center on center): 2"
  • Power draw at 12.8V:
    • Stop/turn: 2.5 amps
    • Tail: 1.0 amps
  • 3-Year warranty


Manufacturer Cross Reference

Light will work as an exact replacement for:

Uni Bond # TL4400L

Wesbar # 3010

Grote # 52312

Peterson # M440L


Optronics ST9RB Series Universal Combination Tail Light Dimensions

ST9RB Optronics Tail Light for Trailers Under 80" Wide - 7 Function - Incandescent - Square - Red Lens - Driver Side - Left Hand

Alternate part number: ST-9RB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Combination Trailer Tail Light - 7 Function - Incandescent - Square - Red Lens - Driver Side - ST9RB

Average Customer Rating:  4.8 out of 5 stars   (1327 Customer Reviews)

5-3/16" x 4-9/16". Incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light. Shock-proof sockets protect bulbs. Stud mount on trailer. Quick connect wiring. 2 bulbs.

by:

The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.

Jerry

11/7/2023

They are still on and I assume they are still working. Parked the trailer in storage after I put the lights on and have only been out to put the new license plate sticker on.



by:

Excellent replacement. Looks like original ones and simple to install. Tried to replace bulbs in old one's they would not hold contact and bulbs were almost as much as the replacement I saved time and anguish by just replacing the old ones



by:

This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.

Theodore

2/20/2021

No worries



by:

Great Product, it's good quality and will fit perfectly for the trailer I use in my Air Conditioning, Heating & Refrigeration Business. The only problem is I ordered the wrong side. Wasn't sure if by the which one was the left or the right? I was looking at the trailer form the front when I determined it was the left one but it appears your suppose to look at the back of the trailer when you do that. Guess I will be ordering the otherside here shortly. Maybe I can get an exchange or if not then I will have a spare and hope if it does get broken again it's the other side. Etrailer has some really good quality stuff at a very good price. I got my hidden hitch from them at a Great Price. They even had a video that showed me how to install it. A couple of the local places here wanted 3 times the amount of what I paid to provide the hitch and install it for me. Will never go anywhere else for any trailer parts or accessories.



by:

We purchased a replacement combo tail light. It arrived on time, in good condition and was the exact replacement.
Although it does not really show on our trailer, we have attached a picture since the trailer has a unique use. It's a small landscaper's trailer converted to a mobile radio broadcasting studio.



by:

The product works well and installs eas ily.



by:

good valueand came as advertised,



by:

FAST SHIPPING



by:

Part was delivered quickly and was as ordered.

Great job etrailer.com!



by:

Last project built. Used etrailer for almost all parts, including the taillight. Friend wants one now so started another one. I will be getting all the parts from etrailer...



by:

These light were a good replacement set for my Home Depot Snowbear trailer taillights. Best price I found for this or similar was here at etrailer.com.

Pic is not of my own trailer but is the same model. You can see the configuration of the taillights.



by:

I ordered both the ST9RB and ST8RB. After years of use, my other boat trailer lights were starting to cause me problems. I decided to order new ones for each side. These are a different make, but the connections were the same as were the mounting holes. Just took minutes to mount and both worked great. Nice bright lights again! Good price and fast shipping. I would definitely order again.

Jes

7/11/2016

Other than changing a bulb, they are still working like new! Money well spent.



by:

These are a great replacement light



by:

Lights were a perfect replacement for existing (busted) trailer lights. These lights did not contain wires, but had well-marked jacks to insert existing wires into. Installed in less than 30 minutes, tested - working great.

Jim B.

9/30/2015

After a year, lights still working great. They stay out in elements year-round.



by:

etrailer.com had exactly what I needed. I bought a replacement for a broken trailer stop, turn, tail and license plate light for my bar-b-que trailer and it matched the other side perfectly. It was packaged very well. I'll be a repeat customer.

Larry H.

4/1/2015

I am still very happy with my light.



by:

Exactly what I needed to replace broken tail light on my trailer. It was an exact match so was able to salvage some parts from old one ... just in case. As I recall, the price was fair and delivered in good time.

I have no complaints ... only praise.

Would highly recommend.

Bob R.

11/1/2017

Last I used the trailer the signal lights were good as new. Should I need quality replacement parts in the future I would not hesitate to place my order with etrailer again.Thanks for making it affordable and easy.



by:

Great company!
I received my order
promptly, unfortunately the box and contents had been smashed during shipping. After contacting customer service via e-mail, e-trailer arranged for a replacement in no time. I will definitely buy from you again when I'm in the market for trailer parts.

Thanks e-trailer!

Rick H.

10/1/2017

After a year of use of our trailer hauling hay, we moved and used our trailer for some of our belongings, 1700 miles in the rain, and all the trailer lighting still works perfectly. Thanks again etrailer.



by:

product was shipped and arrived on time. lights were a match for the ones replaced. oem lights had problem with sockets , bulbs would lose contact.
after a year these have work and held up great. I give etrailer a a+ rateing.
web site, price, service and a good company to use AND I WILL CONUINE TO.
Mr Jewell

Mr C.

5/24/2017

NO PROBLEM, GASKET STILL WATER TITE. OEM HAD TO CLEAN INSIDE ABOUT EVERY 3 MONTHS, PLUS MOISTURE ALWAYS SHORTING BULBS. BEST LITE EVER USED AND TOP SUPPLIER



by:

Just what I ordered and shipped quickly! Thank you!



by:

needed replacement lights for a road trailer
site
had the exact product--price was right--shipping was fast
what more could you ask

Bill B.

4/24/2018

All good



by:

Worked well for the intended use on a light duty trailer that is not heavily used. The internal contacts are less robust than I would like but they are OK for the intended use.

James L.

7/24/2020

As stated before, the internal electrical contacts are rather weak. After around 4 months the contact with the wire was lost on the brake light circuit, Had to solder the feed wire to the contact to get it to work again.



by:

Normal etrailer transaction...what I needed, good price, fast delivery



by:

Just as described. They fit and work perfect - Thank You



by:

The lights worked great and were easy to install. The price was fair for the value of the product. I would purchase from etrailer.com again if the need arises.

Barry

1/30/2018

I remain very happy with the lights and wiring.



by:

Received product promptly and well packaged.
S&H
fairly priced.
Easy electrical connection.
Attaching hardware provided.
Competitively priced.

Edward O.

3/30/2016

Availability and cost makes me very satisfied, Thanks


25
1272
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Customer Advice for Installing Wiring to the Optronics Taillights part # ST9RB
    Thank you for the advice, and we appreciate you not charging us!
    view full answer...
  • Wiring Trailer Stop, Turn, Tail and License Plate Light, # ST9RB to a Trailer
    When wiring Trailer Stop, Turn, Tail and License Plate Light, # ST9RB, how you wire it depends on the type of wiring harness you have on the trailer. If you are using a 4-Way flat that includes one tail light wire, you will need to attach a jumper wire to go from one light to the other for running lights like you have described. There is also what is called a wishbone harness, like # A35W42B. This type of harness has the tail light signal split at the plug. There are then two separate...
    view full answer...
  • Does Optronics Tail Light Lens A90RB Include a Clear Portion for a License Plate Light
    This lens is meant to be used as a replacement to the Optronics tail light, part # ST90RB. It does not have a clear portion for a license plate light. You are looking for a light like Optronics part # ST9RB or part # STL9RB. You could also use Optronics part # ST17RB. I have linked to these parts below.
    view full answer...
  • How to Connect Trailer Wiring to Optronics # ST8RB and # ST9RB Trailer Tailllights
    If you have the Optronics # ST8RB and # ST9RB, no connector is needed. On the back of the taillight, there is a hole for the stop/turn and a hole for the running light wire. Each of these holes will have a smaller hole directly below it. Strip back the insulation on the wire by about a 1/4 inch, twist the copper strands of each wire tightly and push it into the hole in the back of the lamp as you're pushing a small screwdriver into the smaller hole. Once the wire is fully inserted, remove...
    view full answer...
    Image 1 for
  • Is There More than One Bulb in Optronics ST8RB and ST9RB Trailer Lights
    For the trailer lights # ST8RB and # ST9RB there is only one bulb inside the housing and it is a 1157 like you mentioned. For a replacement you would want the part # A1157B. The light from the one bulb lights up the side and the front of the assembly.
    view full answer...
  • How to Wire Optronics Right-Hand Trailer Stop, Turn and Tail Light, Part # ST8RB
    The Optronics Right-Hand Trailer Stop, Turn and Tail Light, Part # ST8RB, connects with two wires. On the rear of the housing are holes to accept bare wire and underneath each one is a smaller hole that serves as a wire release; just insert a small pin (or something like a paper clip) to release the wires. The left-hand matching light is part # ST9RB. If you refer to the included photo illustrating a trailer-side 7-way connector you will be able to see which two wires from the connector...
    view full answer...
    Image 1 for Image 2 for
  • Can Redline Light Guard be Used with Optronics ST8RB and ST9RB Tail Light Assemblies
    The Redline Light Guard # LG440NP referenced in your question is designed to fit the Peterson Square Trailer Tail Light # 432400 and # 432200, however it can also fit other tail light assemblies. The Optronics Tail Lights # ST8RB and # ST9RB that you also mentioned feature very similar dimensions to the above Peterson assemblies and will absolutely work with the Redline Light Guard. The guard itself has an inside dimension of 5-1/2 inches wide, 5 inches high and 3 inches deep. This will...
    view full answer...
  • Replacement for Old Trailer Square Tail Light 4-5/8" x 4-5/8"
    I might have an option for you but without more detail, like a photo, it would just be a guess. That said, the size you mentioned is pretty common more or less for square trailer tail lights like the Optronics Combination Trailer Tail Light part # ST8RB for passenger or part # ST9RB for driver. If this is what yours looks like, I recommend using these as the two stud mounting pattern is pretty standard so don't get bogged down in the small dimensional differences. In regards to a replacement...
    view full answer...
  • Replacement Tail Light Lens For Optronics Combination Trailer Tail Light # ST9RB
    The Peterson Lens # 440-15R will work as a replacement for the Combination Trailer Tail Light # ST9RB. The holes for the lens are slightly different so the bolts will sit differently on the Peterson lens as it is not bored to flush mount the lens screws for your Optronics lens.
    view full answer...
  • Trailer Stop, Turn, Tail and License Plate Light Connection Not Staying Strong
    We recommended stripping the wire 1/4 inch and pushing through the hole. If this does not work and the wire keeps releasing, it may be faulty. Do not attempt to solder the wire. You may call us at 1-800-298-8924 for further assistance.
    view full answer...
  • Are the ST8RB and ST9RB Submersible Lights
    I have a solution for you, but neither the # ST8RB nor # ST9RB are submersible lights. Instead, you'll want to use the # ST6RB and # ST7RB - which are the submersible versions of those lights. These are still incandescent tail lights that look exactly the same, have the same dimensions and are the same 2 wire electrical system, they're just sealed up so that they can be safely used on boat trailers.
    view full answer...
  • Replacement Left Taillight for a 2006 8000HD Snowbear Utility Trailer
    I pulled up a couple pictures of a 2006 8000HD trailer by Snowbear and it looks like the correct taillight you would need is the # ST9RB.
    view full answer...
  • Recommended Replacement LED Lights For Trailer That Keeps Blowing Fuses
    The wires with the circuit you are using are not big enough to handle the draw you have so increasing the fuse is not recommended. I recommend replacing the lights you have with LEDs. The replacement for the # ST9RB lights you have now would be part # STL9RB. These draw about 1/10 of the amperage draw the # ST9RB does. This would decrease the draw on your system and a larger fuse would not be needed. Occasionally when LED lights are installed you will have what is called hyperflash,...
    view full answer...
  • Replacement Square Stud Mount Trailer Lights for Utility Trailer
    The Combination Trailer Tail Light part # ST9RB for driver side or part # ST8RB for passenger side is just what you need to replace the tail lights on a utility trailer. The lights mount via two studs which are 2" apart so they will be a direct replacement. In regards to installation, the lights ground though the studs so you only need to attach the stop/turn and running light wires for each side.
    view full answer...
  • Replacement Tail Light for 1998 Jayco Travel Trailer
    Trailer manufacturers do not often maintain original parts information (or availability) for items such as lights, but we can certainly help you find a suitable replacement. You may want to just install a whole new light kit like # TL29BK or a high-efficiency LED kit # TLL9RK. This will avoid the same problem of no replacement part if the other light on your trailer should be damaged. Both kits include lights, a license plate bracket and all hardware. If you prefer to replace just the...
    view full answer...
  • What Does Shock Proof Socket Mean for Trailer Lights?
    As you mentioned, some of the trailer lights like the Optronics Trailer Stop, Turn, Tail and License Plate Light, 7-Function, Left Hand # ST9RB state that they have a shock proof socket. The manufacturer specifically makes the housing so that the socket has a little bit of play for vibration and road shock built in and they term that a shock proof socket. It just ensures the socket isn't mounted so rigid that the bulb has no give and shatters. This vibration dampening design helps the...
    view full answer...
  • Replacement Trailer Taillight Lens for Optronics Trailer Taillight # ST9RB
    We do have replacement lenses for the Optronics trailer taillight # ST9RB that you referenced. For that you'd just need the # A8RB this would be the easiest solution.
    view full answer...
  • Preferred Method of Grounding Trailer Lighting Circuits
    Running a direct ground up to the trailer tongue or junction box would certainly work, but the only time I'd see that as being necessary is if the lamps were connected to a non metallic structure or a metallic structure that wasn't directly connected to the trailer frame. If the lamps aren't connected to a metal structure in direct contact with the trailer frame, you can use a short length of # DW02359-1 wire with a # DW05702-1 ring terminal on each end to serve as a jumper wire that joins...
    view full answer...
  • How To Connect Optronics Trailer Lights # ST8RB and # ST9RB To a Trailer
    The quick connect feature on the Optronics Light, part # ST8RB, and part # ST9RB, means that you can connect the wires by inserting them into the four holes on the back of the light. It is not referring to a separate part. The wires would be stripped about 1/4 inch and pushed into the correct hole on the back of the trailer light. The holes are marked with the tail light function that the hole provides. The wire when pushed in the hole will automatically lock in place and give you a quick...
    view full answer...
  • Locating Left Side Assembly for Optronics Trailer Light # ST8RB
    The Optronics Trailer Stop, Turn, and Tail Light # ST8RB referenced in your question is for the right side of the trailer. For the corresponding Left Hand assembly, you will just need part # ST9RB, which also includes the needed license plate light. These are really nice, red square trailer lights that are corrosion resistant and feature a replaceable lens and bulb. I have attached a couple short video demonstrations on these lights, along with an installation video that you might find...
    view full answer...
  • Is the Optronics Tail Light # ST8RB Compatible with 3 Wires for Trailer Light Functions
    The Optronics tail light part # ST8RB that you referenced actually doesn't come with any wiring at all. The back of the assembly has holes in it for quick connecting of your light functions. Simply insert the stripped wire into the appropriate slot. This is the passenger side light assembly. For the driver's side assembly you will need part # ST9RB. Attached are some reviews videos and an installation video for you to reference.
    view full answer...
  • Installation Method for Optronics 6-Function Trailer Stop, Turn and Tail Light # ST8RB
    The Optronics 6-Function Trailer Stop, Turn and Tail Light # ST8RB that you referenced does not require a bracket for installation. This light is of the type that uses the two threaded mounting studs, spaced 2-inches apart, to attach to your trailer. These mounting studs also serve a second purpose; they provide the ground connection to complete the electrical circuit. Please refer to the linked video. Certainly if you wanted to mount these with a bracket you could use a simple L-bracket...
    view full answer...
  • Recommended Replacement Trailer Lights With Side Lights For Small Utility Trailer
    We have just what you are looking for. I recommend the LED Submersible Trailer Stop, Turn and Tail Light, part # STL8RB. This is for the right side of the trailer and is a stud mounted LED light. It has the side marker light that illuminates when the running lights are powered. For the left side of the trailer you will want part # STL9RB. I have attached a product review video and have also attached a drawing that shows the dimension for these lights you can take a look at.
    view full answer...
    Image 1 for
  • Difference Between Optronics Left Hand # ST8RB and Right Hand # ST9RB Trailer Lights
    It sounds like you are referring to the Optronics Right Hand Trailer Light # ST8RB and the Left Hand # ST9RB. The only difference between the two assemblies is that the Left Hand/Driver's Side unit features an additional license plate light to illuminate the trailer's license plate. I have attached a couple short video demonstrations on these lights that you can also check out.
    view full answer...


< Previous
12



Do you have a question about this Trailer Light?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.