5-3/8" x 4-3/4" Square. Waterproof, LED trailer tail light with 14 diodes provides stop, turn, tail, side marker, side reflex, and rear reflex functions. Screw-on lens. Stud mount to trailer with included studs. 2-Wire design.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be installing the LED Custer Trailer Tail Light, part number CPL001. As you can see, this light replaces your factory incandescent light with LED's. Nice and bright, you actually have a marker light here on the side. A lot of them just have reflectors, this one actually does have a light that lights up. It's a nice feature about this light. The first step when installing your new trailer light, if you do have the factory one or the replacement incandescent one here, go ahead and remove that. We'll take our new LED taillight.
It's an easy two wire design. The studs are actually the ground here for the light so it'll get grounded through the trailer and through the holes. Take our wires, feed those through. Line up the studs in the pre-drilled holes. It does come with new flange nuts to mount it to your trailer. We'll go ahead and get a 10 millimeter socket and snug those down.
Once we have those tightened down, you'll see it nice and secure to the trailer and, again, those are our grounds here. You only have two wire design. Green wire for our turn signal and brake light and the brown wire will be our running light circuit. Just trip those back and then make our connections. We're going to use heat treat plug 00:01:07 connectors just to protect our connections.
Now that we have these crimped down we'll go ahead and heat these up. We'll shrink it around the wire to seal it up. Go ahead and take some electrical tape, wrap those connections up, just another added layer of protection for our connections. Now that we have our trailer hooked up to a vehicle, we can go ahead and test our functions. We'll turn on our running lights. See a nice, bright, LED running light.
Then we check our turn signal. Then our brake. Now with our new taillight installed, we're ready to hit the road. That'll do it for the Custer LED Taillight, part number CPL 001. .
Average Customer Rating: 5.0 out of 5 stars (33 Customer Reviews)
5-3/8" x 4-3/4" Square. Waterproof, LED trailer tail light with 14 diodes provides stop, turn, tail, side marker, side reflex, and rear reflex functions. Screw-on lens. Stud mount to trailer with included studs. 2-Wire design.Great light. It replaces the same kind that got broken in a storm when the trailer flipped on its side. The light is so easy to install and is bright. With LED, no risk of loose bulbs.
Easy install, much brighter than OEM. Very satisfied. Great company, long time customer.
I confronted a mail thief's car on our single lane private road, while driving my SUV with homemade teardrop attached. The leader drove her stolen Lexus off road around me and took out my passenger side trailer light, fender, etc. This was the perfect replacement and I was glad to be able to buy the single light and not have to pay for both. It matched exactly and has performed flawlessly.
PS: My wife had taken photos of her license plate & car, but they never caught them.
I've had the Karavan utility trailer for almost 10 years. The standard bulbs were problematic in that spring tension and bulb contact become intermittent for the last couple of years and the last thing needed is an equipment failure ticket pull-over.
etrailer web site was easy to navigate and more importantly, the upgraded l.e.d. replacement version was super easy to identify and purchase with the confidence of a proper fit.
Install was a breeze and I no longer worry about bulb failures.
Oh, and they upgraded my shipping choice at no extra charge.
It is a pleasure to work and order items from trailer.com. The products I received are very well made and enhanced my boat trailer. Great customer service, answered all my questions and followed up by making sure what I ordered was perfect.
These LED lights are very nice. Replaced old ones because lightbulb kept falling out of socket on bumpy roads. Now no more worries with LED. Nice and bright. Arrived within 4 days of placing order.
The item was shipped promptly and is as described on the web site. Easy installation and replacement of the previous Trailer Tail Light.
I put all led lights on my trailer at the same time. They've been great
These lights I ordered came in exactly as intended. The correct lights and were delivered in a satisfactory time. I would recommend etrailer.com as a good supplier of trailer needs. Thanks
Light looks good and is inexpensive. It has 2 wires so I assume ground is the bolts. It will make my trailer look much better.
Fast shipping, Excellent follow-up, quality products
I was concerned that it might be difficult to find the exact replacement light and yet it was so easy with this site. They have a great selection and I found an exact replacement. Very satisfied!
fast delivery. no unpleasant surprises.
i'll continue to use etrailer.com for trailer parts.
Awesome lights easy to connect and install shipping was fast. Thank you
Accuarate description as a replacement unit and great price. Will be back for future purchases!
Used these to upgrade identical dim incandescent assemblies. Work great.
Great timely service. Nice light!
George thank you for the follow-up the problem was solved efficiently. I love doing business with you guys!
Excellent light, and thanks to Lorie B
Arrived well packaged was closest match I could find to my broken one, easy simple install.
Still working great after 1 year of use!
REPLACED ONE WE BROKE LOADING A '34 FORDOR.
WORKS GREAT!
Perfect match,came when promised, unbeatable service,thanks.
Exactly what we needed.
Perfect fit and match
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.