Parts Needed To Mount 5,200LB Tandem Axles To a Homemade Car Hauler Trailer
Question:
Im not sure what kit I need I already have springs I just need to re mount them so I need the equalizer and the mounts to weld on The axles are 3" and I believe 5200lb and will be mounted to a tube frame car hauler.
asked by: Jared J
Expert Reply:
To attach your axles to the the frame of the car hauler you will need the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # AP233-H248. This kit includes all the hangers, equalizers, shackle straps, shackle bolts and nuts to fit your axles. I have linked an article below that will help you with positioning the axles on your trailer to ensure that you have the correct percentage of tongue weight when towing to be safe.
If you would prefer to have an upgraded suspension the Dexter E-Z Flex Suspension Kit # K71-652-00 will provide you with a cushioned equalizer, shackle straps and wet bolts. This will allow you to add Grease # L11390 to all the moving components in the suspension easily and increase the life of the parts as well as prevent binding up of the suspension due to corrosion. You will need 4 of the Hangers # 28-5 for the front and rear hangers and 2 of the Hangers # 29-31 for the center hangers.
I do want to point out that with your image it appears like you have mobile home axles. While mobile home axles are plentiful they are generally a one time use axle for getting the mobile home to its site and then discarded. If these are marked as mobile home axles you will want to check with your local laws as they are illegal to be used on the roadways in some states with a trailer other than the mobile home. If you find that they are unable to be used, I recommend the Dexter Trailer Axle w/ Electric Brakes # 6340624-EB as a great option as it is the same 3" diameter and will allow you to use your leaf springs and U-bolts that you already have.
(click to enlarge)
Products Referenced in This Question
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-5/8 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Hanger Kit for Tandem Axle Trailer that Needs More Wheel Clearance
- Shop: Suspension Enhancement
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Leaf Spring For 3,300LB Axle Capacity With 18-1/2 Spring Eye To Spring Eye Measurement
- Q&A: Do Hangers Need to be Exact Match to Use APT6SE Kit
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: CE Smith Front/Rear Hanger for Double-Eye Springs - 1-7/16" Tall - 9/16" Bolt Hole
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 3-1/8" Links
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Q&A: Finding a Replacement 3,500 Lb Axle
- Q&A: Determining If Dent In Torsion Axle Is Causing Driving Vibrations
- Q&A: How To Fix Tires Hitting Fenders After Installing New Dexter E-Z Flex Equalizers
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 29-31 Review
- Article: Trailer Wiring Diagrams
- Search Results: e59sr
- Search Results: k71~291~00
- Search Results: apubr~1
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Trailer Tire Sizing
- Article: How to Raise Your Travel Trailer Height