Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K
(13 reviews)
Price: $50.90
Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K
Item # C84DR
Retail:$71.30
Our Price: $50.90
You Save: 29%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (13)
- Q & A (0)
- Photos
CURT A-Frame Trailer Coupler - C84DR
- 2-5/16 Inch Ball Coupler
- Bolt-On
- Weld-On
- 14000 lbs GTW
- Standard Coupler
- CURT
- No Latch
Coupler is made of sturdy steel with a durable, rust-resistant powder coat finish. QuickPin ensures fast, easy, secure hookup and disconnect - just drop the trailer tongue onto the ball, and slide in the pin.
Features:
- A-frame coupler lets you hook up your trailer to your tow vehicle
- Provides connection point for hitch ball
- QuickPin design ensures simple, secure hookup and disconnect
- No jamming or complicated hinging components - just drop coupler over hitch ball and slide in the pin
- Lasso lanyard secures pin to coupler to avoid missing pieces
- Heavy-duty stamped steel construction
- Black powder coat finish offers excellent corrosion resistance
- Built-in jack-attachment point allows for quick, easy mounting of round utility jack
- Bolt-on or weld-on installation
- Hitch pin and clip included - hitch lock sold separately
- SAE J684 certified
Specs:
- Application: 50-degree A-frame
- Ball size: 2-5/16"
- Weight capacity: 14,000 lbs
- Overall length: 14"
- Jack hole diameter: 2-1/4"
25474 Curt QuickPin 50-Degree A-Frame Trailer Coupler w/ Jack Hole - No Latch - 2-5/16" Ball - 14,000 lbs
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
Customer Reviews
Curt QuickPin No Latch A-Frame Trailer Coupler w/ Jack Hole - 50 Degree - 2-5/16" Ball - 14K - C84DR
Average Customer Rating: 4.8 out of 5 stars (13 Customer Reviews)
Coupler is made of sturdy steel with a durable, rust-resistant powder coat finish. QuickPin ensures fast, easy, secure hookup and disconnect - just drop the trailer tongue onto the ball, and slide in the pin.by: William 12/12/2023
This makes coupling easy. Not mor lock lever getting jammed. Does require extensive cutting off old one and welding on new. It is worth it! Put this on 2011 27 ft funfinder. Then put one on my 12 aluminum trailer. Was just bolt on. Then my tractor utility trailer. Also was simple bolt on.
by: Paul 03/13/2024
I like the slide in pin works great
by: GKNDville09/30/2022
This is a great coupler and great people to business with! Tks Adam and team for getting it here so quick. Trailer tongue angle wasn't correct, but that's not a problem for a welder!
by: Willie 12/01/2022
I did not like my old A-Frame Trailer Coupler the way it latched and It aggravated me to the point I ordered this Curt QuickPin No latch from etrailer and Replaced my old coupler with this new style which works great and No more aggravation..Glad I researched and found this Easy and simple way to hook-up my 14’ utility trailer.. Thanks etrailer,
by: Ray 05/08/2023
Package arrived on time. Haven’t installed it yet , but very happy with my purchase. Just what l needed for my car hauler.
by: David 11/18/2022
Came in quickly. Exactly what I ordered thanks guys
by: Arnold 11/08/2022
by: Ken08/26/2023
Bad ass
by: Ronnie 08/08/2023
by: Mark 12/03/2022
by: Kurt 12/21/2022
by: Marcus 05/10/2023
by: Carl 10/01/2022
13
13
See what our Experts say about this CURT A-Frame Trailer Coupler
- Will Pro Series 6" Detachable Caster Fit Pro Series Round A-Frame JackYes, the Pro Series 6", Detachable Caster # PS1400750340 will fit the Pro Series Round, A-Frame Jack # PSRV20000103. If you would also like a footplate you can use the # PS1400700340. The only Curt A-Frame coupler we have is the QuickPin # C84DR. This fits a 2-5/16" ball as well with a higher capacity at 14,000 lbs. The QuickPin design allows for a simple and secure hookup. If you would prefer a thumb latch I recommend the A-Frame Trailer Coupler # CA-5400-B instead.
view full answer... - Mounting Hardware Needed To Install Curt QuickPin No Latch A-Frame Trailer Coupler 25474 # C84DRThe Curt QuickPin No Latch A-Frame Trailer Coupler 25474 # C84DR will require grade 5 hardware. It is recommended to use six 1/2" bolts, six 1/2" lock nuts and twelve 1/2" washers. This can obviously change depending on your exact frame dimensions. I have linked the installation instructions at the bottom of the page which you can show the installer as well.
view full answer... - Is There a Trailer Coupler Repair Kit for a 2-5/16" Coupler GVWR 7KI do have an option for you and this is a common question but the trailer coupler repairs kits aren't universal and only a very few available for select trailer couplers. Therefore, if you're having issue with your existing coupler it will need to be replaced for which I recommend the Curt QuickPin No Latch A-Frame Trailer Coupler part # C84DR. This is a bolt-on coupler so all you need to do is cut the old one off and drill/bolt the new one in place, no welding required. It also uses a...
view full answer... - Replacement For 8,000 lb A-Frame Trailer Coupler With 2-5/16 Inch Hitch BallThanks so much for the photos, and there isn't a replacement for just the front coupler portion of the long-discontinued coupler you have. So in order to switch out from a 2" to a 2-5/16" coupler attachment, you will need to replace the entire coupler. Since yours looks to be bolted on, you can remove it and replace it with another bolt-on coupler that accepts a 2-5/16" hitch ball: - Curt QuickPin No Latch A-Frame Trailer Coupler # C84DR The # C84DR is the easiest way to change your coupler...
view full answer...
- 2 inch Ball Coupler Recommendation for A-Frame TrailerI checked with Curt and they only have a 2-5/16 inch ball version of the QuickPin with the part # C84DR. S for a 2 inch ball a-frame coupler I really like the Demco coupler part # DM14793-52 which has the eZ Latch that I think is the easiest and least likely to get hard to operate over time like a lot of couplers do.
view full answer... - Locking Pin Recommendation for the Curt QuickPin No Latch A-Frame Trailer CouplerThere is! To replace the standard pin and clip on the Curt QuickPin No Latch A-Frame Trailer Coupler # C84DR Curt actually recommend the Hitch Lock # C23025 which is what I recommend going with!
view full answer... - What Does 50 Degree of Curt QuickPin Coupler # C84DR Reference50 degrees in the title and description of the Curt QuickPin part # C84DR is in reference to the angle of the trailer frame that this coupler fits on. This is the standard angle trailer frame so I'd be shocked if your trailer didn't match this.
view full answer... - Can You Switch a Trailer with Lunette Ring for a 2-5/16" Trailer CouplerIt sounds like you have a lunette ring on your trailer now and are wanting to swap that out for a 2-5/16" trailer coupler and if that's the case we have some great options for this. If it's an a-frame trailer which is the most common type then I recommend the Curt QuickPin No Latch A-Frame Trailer Coupler part # C84DR which can simply be bolted to the trailer frame with no welding required. In order to remove the old coupler, you'd likely need to cut the existing welds off if that's how...
view full answer...
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Installed by:
Michael B
Written by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arnold
11/9/2023
Works very well. Easy to use.