bing tracking image
  1. Trailer Suspension Parts
  2. etrailer
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center

Item # APTT5
Retail:$134.28
Our Price: $108.50
You Save: $25.78
Trailer Suspension Parts
Shipping Weight: 34 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately. Great Prices for the best trailer suspension parts from etrailer. Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center part number APTT5 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (45)
  • Q & A (0)
  • Photos

etrailer Trailer Suspension Parts - APTT5

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • Triple Axle
  • etrailer

Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 6 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4-1/2" or 5" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (8) 3-1/4" Tall hangers
    • (4) 7-3/4" Long curved equalizers
    • (16) 2-5/8" Long shackle straps
    • (24) 3" Long x 9/16" diameter shackle bolts
    • (24) 9/16" Diameter locknuts
  • Designed for use on trailers with triple, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs



Hanger Locations for Triple Axle

Leaf SpringsA - Distance Between Front and 1st-Center HangersB - Distance Between Center HangersC - Distance Between 2nd-Center and Rear HangersD - Distance Between U-BoltsE - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)24-3/4"29"24-3/4"28-1/2"4-1/2"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
29-1/2"34"29-1/2"34"5"2-3/8"
(typical 3,500-lb trailer axle)

Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.



TSW-18 Triple Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs

Replaces APTT5





Customer Satisfaction Score:


Customer Reviews

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center - APTT5

Average Customer Rating:  4.8 out of 5 stars   (45 Customer Reviews)

Leaf-spring mounting kit includes 3-1/4" tall front, center, and rear hangers, and necessary hardware. Equalizers are 7-3/4" long. Components for mounting axle to springs sold separately.

by:

We installed the kit on a home-built 25' gooseneck trailer that we were converting from 2 axles to 3. This kit, along with new leaf springs on all 3 axles, went on with no issues, and it has been running strong with no problems since the installation. We've put quite a bit of weight on the trailer between logs, lumber, tractors, and equipment, and there have been no issues so far. It was great to have everything we needed, (other than springs), in one kit!

And etrailer has always been good about fast delivery, easy purchasing, and great updates on status. Things have gone so smoothly that we have never had to contact Customer Service, so I can't comment on how they do!



by:

I ordered this kit for a trailer that I bought as scrap iron to haul logs so I wouldn't tear up my good trailer. The first load I broke 3 shackles and 2 equalizers. I looked at parts and found this kit at a great price to rebuild my suspension. I had it within 3 days of the time I ordered, And the service was great!! The best part....... when I got the box I thought they knew me personally and had already seen the trailer I was working on, Redneck Trailer Parts LOL. I plan on getting rid of the redneck dually setup with a different set of axles and get rid of the trailer house wheels and make it into a gooseneck. I will for sure get all my parts from Etrailer.com for the rest of this project and any other trailer parts I need. VERY VERY pleased with the parts, service and fast shipping!!



by:

Robert p was give little info on what I needed. I was sent the items and they were perfect fit.. I’ve been using Etrailer for probably 15 yrs and never disappointed with product and customer service..



by:

The bolts and shackle set that I bought worked out wonderful bolted right up no issues had it done in a couple hours thanks so much Etrailer.com

Steve

7/1/2020

Very good



by:

I purchased this kit to replace my existing suspension on an old equipment trailer. Very happy with the product and the help that I received from Londyn in taking the time to help me find the right set to fit my trailer requirements.

A tip for if you are replacing them on a trailer with existing shackles or if you don't want to pull the axles out from underneath the trailer. If you set up the hangers onto a 2x4 you can clamp them into place with the board holding them in place and inline with each other so you can tack weld them to the frame without worrying about them bowing or twisting out of alignment. And it will save you lots of time and frustration.



by:

The bushings in my equalizers were worn out, so I was just going to buy new equalizers, then I decided to buy new bolts also. This kit cost less than the equalizers and bolts so I bought it. I went ahead and used the new shackles, but I now have a set of hangers laying around. It all fit well. I used it with PR4 springs. My existing hangers were already set up with the dimensions shown on the web page for this kit.



by:

A couple bolts and nuts lost due to shipping damage. One call to etrailer and the missing items were on the way. Great service



by:

We had an old tri-axle that needed work. Overall a good trailer just many road miles and worn parts. With this kit we were able to get it on the road again, with parts that match the job went quickly. The website even offered a diagram for proper spacing of the hangers for the layout.
This is only the second time I have used E-trailer, but if they keep up the great service, I can see many years of business helpiong to maintain my fleet of 100+ vehicals.



by:

Great quality. Great price. Went on 22k tri axle gooseneck. Tightened everything right up. Only wish is that the nylon bushings were softer steel aloy for longevity sake.



by:

Everything is great all finished I appreciate the great service I’ve received from etrailer over many years



by:

Excellent quality. Needed a full triple axle kit. Everything was there. Turned the trailer over and had it put together and welded up in about 4 hrs. Will definitely be ordering more product from this company in the future.



by:

Great products and service!! All parts were correct, delivered fast and fit like a glove. Thanks You etrailer.com



by:

Perfect for the dump trailer I am building. Product was shipped fast and in good condition when it arrived. The product is easy to install but it would be nice if they added mounting instructions with the parts. This information is available on their website however and is easy to follow



by:

Worked as described. Got my trailer pulling like new.



by:

My order was on hold fore quite some time so I called and spoke with Lauren and she took good care and found their was only one item holding things up so we canceled that item and she got the remaining order shipped right away. Ask for Lauren if you want it done right!



by:

Awesome kit. Has everything you need to replace worn out hanger kit. Highly recommend!!!

Plus shipping was much faster than estimated.



by:

The hanger kit is holding up very well.



by:

Everything fit as expected. My trailer rides like new again.



by:

Did the job repairing our camper just f ine.

Camper

9/30/2018

Still working



by:

Thanks for speedy service and providing an very good quality product.



by:

Haven't had a chance to put them on. Received products earlier than expected. Will try to send pictures before, as, and after putting them on.



by:

Was going to remove and rework old parts but found this kit and at a great price. The order came quickly and the parts are perfect. Highly recommend these parts for your next job!



by:

top notch product at a very good price. Fast delivery and the help sections are very informative. I would recommend this company to everyone



by:

Steel looks good, I haven’t installed it yet but looks like it’s gonna work good



by:

EVERYTHING FIT PERFECT. GREAT PRODUCT


25
45
Show More Reviews

See what our Experts say about this etrailer Trailer Suspension Parts

  • Troubleshooting Front Equalizer On Triple Axle Trailer Hitting Trailer Frame
    Based on the picture you provided you will need to replace the center hangers on your triple axle trailer with the Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole # 115919 which is just under 2-1/4" taller than the center hangers included in the # APTT5 you purchased and will give you the additional clearance you need. I included a video of the # 115919 for you to take a look at.
    view full answer...
  • Can Triple Axle Hanger kit part # APTT5 be Used on Trailer with 7k Axles
    Yes, the Triple Axle Hanger kit part # APTT5 would work great on your trailer that has 7k axles as it was designed for use on axles up to 7k.
    view full answer...
  • What's Involved to Add a Third Axle to Trailer Suspension
    The first thing you'll need is to determine what the correct axle is that you need. To do that you'd need to know the capacity of the axle, the distance between spring seats, and distance between hub faces. With that info we can see if we carry the axle you'd need or if you'd need to custom order one locally. Next you need to consider that all of the current suspension hangers will need to be moved. Unfortunately you don't get to just add a third axle in front of or behind your current...
    view full answer...
  • Replacement Triple Axle Trailer Hanger Kit For a 2009 Keystone Raptor 3812TS
    While I am unable to determine the exact size hangers your 2009 Keystone Raptor 3812TS has, it does appear the Triple-Axle Trailer Hanger Kit # APTT5 has all the parts you will need. This kit includes 3-1/4" hangers measured from the frame to the center of the mounting hole. If you have a different height hanger please let me know and I will find you the correct height hangers. And if you would like to upgrade to a cushioned equalizer like the Dexter E-Z Flex # K71-657-00 I can then create...
    view full answer...
  • Will Trailer Suspension Hanger Kit APTT5 Work with Leaf Spring # e78SR
    Yes the leaf spring part # e78SR would work great with the hanger kit part # APTT5 that you referenced.
    view full answer...
  • Distances Between Hangers for Triple Axle Kit when Used with Hanger Kit APTT5
    Yes we do have a chart that shows how to space the axles of a triple axle trailer with a hanger kit like the # APTT5 that you referenced. I attached this chart for you to check out as well. The bottom section of the chart is for use with springs that are 25-1/4 inches in length from spring eye to spring eye. This is most likely what you have. The upper portion is for springs that are 20-3/8 inches.
    view full answer...
    Image 1 for
  • Determining the Leaf Spring Drop From an Empty Trailer to a Fully Loaded Trailer
    The drop that you will experience with the 3-Leaf Double-Eye Spring for 2,500-lb Axles, # e66SR, from a trailer at zero load to full load is going to be 1-1/2 inches. A few things to note with a fully loaded trailer is that you will want at least 3 inches of clearance above your tires and 2 to 2-1/2 inches of clearance from the top of your axle to the bottom of the frame where the leaf spring hangers are welded. You will also want to get the correct hanger kit for the leaf springs you...
    view full answer...
  • Do The Trailer Suspension Hangers & Equalizers Need To Be Changed Going From 3,500 to 6,000LB Axles?
    You may be able to use the same hangers and equalizers that are already being used on your triple axle trailer. First you will need to determine if you will be changing wheel and tire sizes that will require you to move the axles further apart so that the tires do not contact each other. This may also affect your trailer fenders if the axles are being spread further. If your tire spacing is okay you will then only need to find the larger capacity leaf springs that match the length of...
    view full answer...
  • Correct Hanger Spacing Using Triple-Axle Hanger Kit With 3,500 Lb 25-1/8 Inch Long Leaf Springs
    The correct hanger spacer when using the Triple-Axle Trailer Hanger Kit part # APTT5 with the 4-Leaf Double-Eye Spring part # e54SR is 29-1/2" from the front hanger to the center hanger, 34" between the center hangers, and 29-1/2" from the second center hanger to the rear hanger. Please note, you will also need the U-Bolt Kit for Mounting Kit part # APUBR-1 in order to mount the leaf springs to the axle.
    view full answer...
  • Suspension Recommendations for a Triple Axle Gooseneck Trailer
    We do have a variety of spring hangers you can use for a 7K triple axle system, and or that I recommend the Triple-Axle Trailer Hanger Kit # APTT5 which will space your axles 34" apart on center (see attached photo) and is compatible with 1-3/4" wide leaf springs like the 7K 6-Leaf Double-Eye Spring # e64SR. You'll need to have your current hangers cut off and this new kit welded on for the installation. You can use your current axles but I will say that mobile home axles are only designed...
    view full answer...
  • When Converting from Tandem Axle to Triple Axle Where Does Third Axle Install
    When going from a tandem axle trailer to a triple axle trailer you want to install the center axle where the current center hanger is for your tandem setup. This means you have to remove both of your current axles to position them properly. This gives you the additional axle support you want without throwing off how much tongue weight you have relative to the trailer weigh. We have triple axle hanger kits like the part # APTT5 you could use too. You should note that you will be increasing...
    view full answer...
  • Replacement 6k Leaf Springs and Hanger Kit for 2015 Venture Trailer with 17k GVWR
    Based on the GVWR and the amount of axles your trailer has you'd want a leaf spring for 6k axles like the part # e34SR. Then for a triple axle hanger kit the part # APTT5 would work great.
    view full answer...
  • Recommendation for Adding Third Axle To Trailer Suspension
    The Dexter Heavy Duty Suspension Kit # K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've attached an article to help with the proper positioning of your axles. You will need to add another equalizer of the same dimension as you have to each side and then add the same leaf springs and shackle straps as what you currently have. You...
    view full answer...
    Image 1 for
  • Where To Position Trailer Leaf Spring Hangers on Triple Axle Trailer Before Welding
    I do have a guideline for you in regards to trailer leaf spring hanger spacing on a triple axle trailer with 25-1/8" to 25-1/4" trailer leaf springs but we can't offer specific measurements as there are too many variables involved. That said, I have attached for you below a good starting point like what is used for a kit like the Triple-Axle Trailer Hanger Kit for Double-Eye Springs part # APTT5. From there, you'd need to adjust to your specific setup before welding by mocking everything...
    view full answer...
    Image 1 for
  • Trailer Axle Over-Under Kit to Raise Height of Trailer
    You can increase trailer height by welding on taller spring hangers but there is also another way to lift a trailer without having to cut off the old hangers and weld on all new ones, an axle over-under kit. Kit # K71-384-00 for 2-3/8-inch diameter axles and kit # K71-385-00 for 3-inch axles are bolt on kits that place your leaf springs above the axles, as shown in the linked photo. The amount of lift you get will be the sum of the axle diameter plus the height of the spring stack. So,...
    view full answer...
    Image 1 for
  • Reasons for Different Spacing Between Hangers in Triple Axle Hanger Kit
    The difference in the spacing for the # APTT5 hanger kit comes in to play with the center spring due to the additional components attached at each end of the spring. Both the first spring and last spring have the same spacing since they are each attached to the hanger at one end and the equalizer at the other. The center spring however is attached to two equalizers. Since the center spring doesn't contact a hanger directly, some additional space is needed between the hangers to accommodate...
    view full answer...
  • Are Side-Frame Mount Jacks Available With Different Gear Ratios
    For that I recommend an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which has a combined 12,000 lbs of capacity, and offers 38" of lift.
    view full answer...
    Image 1 for Image 2 for
  • Hanger Kit to Be Used with Triple Axle Dexter EZ Flex K71-657-00
    Yes the hanger kit part # APTT5 would work well with the Dexter EZ Flex part # K71-657-00 that you mentioned as well. The 3-1/4 inch height of all of the equalizers would work great without any issue.
    view full answer...
  • Recommended Triple Axle Setup for Tiny Home Trailer
    The best trailer axle option we have for your custom tiny home trailer build is going to be the Dexter Trailer Axle w/ Electric Brakes part # 8327864-EB for 7,000 lbs. This axle is top of the line and comes with everything you need for bolt-on installation. It comes with electric brakes, 8 on 6-1/2" hubs, and zerk fittings on the axle for easy maintenance. The hub face to hub face measurement is 94" so once you have wheels and tires on you will be around 8-1/2' wide. I have attached some...
    view full answer...
  • Parts Needed To Create Triple Axle Suspension Slider For Adding Larger Wheels/Tires On Boat Trailer
    While we currently do not carry the slider suspension mounts used on boat trailers we do have most of the necessary components which will allow you to build some. You will need to source the angle iron locally to mount the Triple Axle Hanger Kit # APTT5. Once you have the hangers welded in place you will be able to have the assembly galvanized at a local shop. We do now carry leaf springs with a Dacromet coating for increased longevity. These springs are rated for a 6,000lb axle as we...
    view full answer...
  • How to Determine if a 108 Triple Axle Fender Would Work with the Hanger Kit part # APTT5
    The distance between the axle centers with the # APTT5 when used with a 25-1/4 inch spring like the # e66SR will be 34 inches. You would need to compare that dimension to the dimension of the wheel centers on the fender to see if this kit would fit. Tire size will play into this as well. You will need to consider this also.
    view full answer...
  • Parts Needed to Convert a Tandem Axle Trailer to a Triple Axle Trailer
    Daniel, you can add a third axle but you're going to want to keep all of your axles the same size. So if you wanted 6K axles instead of 5.2K then you'd want to swap the other two as well. With that said, to add your third axle you're going to need the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles # APUBR-8, the Triple-Axle Trailer Hanger Kit for Double-Eye Springs # APTT5, and the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles # e76SR. For the axle itself, let...
    view full answer...
  • Torque Specification for Shackle Bolts in Redline Triple-Axle Trailer Hanger Kit
    For the 9/16 inch diameter shackle bolts included in the Redline Triple-Axle Trailer Hanger Kit # APTT5 referenced in your question, you will want 65 to 95 foot pounds of torque. This kit can be used to attach 6 leaf springs to your trailer frame. I have also included a chart that will help you determine the hanger location based on the type of leaf springs you have for your trailer.
    view full answer...
    Image 1 for
  • Recommended Hanger Spacing for Triple Axle Trailer
    There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like # e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles 28-1/2 inches on center. I've attached a photo to assist. This is all based on 7-3/4 inch curved equalizers and 2-5/8 inch long shackle straps. These are found in the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Alexander C
Updated by:
Alexander C
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.