Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2
(871 reviews)
Price: $197.82
In Stock
Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2
Item # HP44VR
Our Price: $197.82
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (871)
- Q & A (0)
- Photos
etrailer Trailer Fenders - HP44VR
- 14 Inch Wheels
- 15 Inch Wheels
- For Tandem-Axle Trailers
- Steel
- 66 Inch Long
- Bolt-On
- Weld-On
- 9 Inch Wide
- No Step
- etrailer
9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
- Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
- Close fit keeps dirt from building up between the fender and trailer
- 1" Wide outer edge is rounded
- Sturdy, 16-gauge, cold-rolled steel construction
- Prime and paint the fenders to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation
- Made in the USA
Specs:
- Application: tandem-axle trailers with 14" to 15" diameter wheels
- Dimensions: 66" long x 9" wide x 19-3/4" tall
- Quantity: 2 fenders
- Weight: 19 lbs each
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fenders to your old ones.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For bolt-on fenders, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing old, welded-on fenders, either carefully chisel them off yourself or take your trailer to a weld shop to have the fenders professionally removed.
- Don't forget to prime and paint the new fenders to keep them from rusting (and to match your trailer's finish).
- Before you start drilling, position each fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fenders are mounted correctly.
MFS00065 Tandem Axle Trailer Fender with Tear Drop - 90-Degree Back - Cold Rolled Steel - 14" to 15" Wheels - 2 Pack
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2 - HP44VR
Average Customer Rating: 4.6 out of 5 stars (869 Customer Reviews)
9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.by: Monica04/27/2023
Had to replace boat trailer fenders and ordered from etrailer. Shipment was amazing and quick. The fenders were a little longer than we needed, but my husband made them fit. The outcome is great!
by: Johnny05/22/2023
Original destroyed by a tire failure. Arrived quickly and well packed (wrapped). However I did not realize they were bare metal. No problem for a rattle can. How to video was very helpful. Complete install, minus paint, took about four hours. A second set of hands would be very helpful!
by: Andrew12/20/2023
Product is exactly what I needed! Super grateful for this company.
by: Evelio03/22/2024
Great product and excellent service quick delivery.
Thank you
by: Olen 05/18/2023
9 inch fenders needed 7 in for boat trailer, looks strange on a boat trailer but fender is of good quality. need to stock boat trainer fenders.
by: Thomas 02/06/2024
A great product for the price point!
by: Perry 11/22/2023
everything is very nice just what I exp ected
by: Jim S05/17/2023
Product arrived as described. Great selection eTrailer!
by: Brad 07/14/2023
Accommodating, great service and fast delivery. I haven't had time to open the package yet. I expect that the product will be everything I had hoped it would be.
by: Ray08/09/2022
I would have given 5 stars but the first set of fenders I received were the wrong size. Customer service was extremely helpful and sent me out the correct ones and a prepaid return label.
The fenders come wrapped in plastic which was torn but there was no damage to the fenders other than minor scratches.
by: Billie07/05/2023
The fenders fit nicely and look great doing their job.
by: Kenneth 07/19/2023
Fast shipping and just what I needed
by: Mike08/09/2022
Wrong fender arrived the first shipment. Return was easy enough and the correct order arrived quickly after that. The part was very adequate and has performed well since installed. Good price and customer support.
by: James04/21/2022
I ordered 66 inches, after a 2 month delay you sent me 73 inch length. They don't fit! Now I will have to cut them in half, adjust length and weld them back together!! A real real inconvenience and much more additional work.
Could have done that with the local farm and barn fenders 2 months ago.
Brooke M.
4/27/2022
Thank you for letting us know. I have sent your information along to our customer service team.
by: Robert 09/25/2022
We got these fenders for our work trailer. They are very sturdy and fit just as they should.
by: Kevin02/03/2022
I have ordered fenders from etrailer on three separate occasions. Every time the product was excellent and arrived in minimal time. I will NEVER use anyplace for my trailer needs. Thanks for doing what you do!!
by: Phantom Entertainment05/19/2023
Great quality, correct sizing
by: Steve 05/22/2023
Product was excellent fit perfect
by: Bent05/18/2023
great price for the material made
by: Cindy 04/02/2023
Ordering was easy and it arrived the next day! we will definitely order again!
by: Thomas 02/11/2023
good quality, true to size, fairly heavy. Easy install
by: Terry 11/09/2021
Nicely made. Much easier than trying to weld in new pieces were they rusted off at the side steps.
by: Craig03/01/2023
fit perfect
by: Quincy01/12/2023
Exactly what I ordered and precise shipping status
by: Zach 10/03/2022
Great customer service Lori was great at answering my questions. Fast delivery and exactly what I needed.
25
869
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Correct Backing Plate for Tandem Axle Teardrop Trailer Fenders - 14" to 15" WheelsThe correct backing for the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers part # HP44VR is the Backing Plate for Tandem Axle Trailer Fender part # HP82FR. Please note, this will need to be tack welded to the backside of the fender.
view full answer... - Width of 66" Tandem Axle Teardrop Trailer FendersThe Tandem Axle Teardrop Trailer Fenders part # HP44VR which are 66" long measure 9" wide. I have attached a photo below.
view full answer...
- Are Tandem Axle Trailer Teardrop Fenders Coated Or Bare MetalI'm glad to hear that you are happy with your Tandem Axle Trailer Teardrop Fenders for 14" to 15" Wheels # HP44VR! They are cold rolled steel that is bare metal so you will need to prime and paint them, or even have them powder coated to make them corrosion resistant.
view full answer... - Can The etrailer Tandem Axle Fenders HP44VR Be Ordered As A Single Fender?There is a different design fender that is close in size that can be ordered as a single fender, but the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers - 14" to 15" Wheels - Qty 2 # HP44VR only comes as a quantity of two. Instead there is the # HP97VR which is a single fender that measures 64-1/2" long x 9" wide x 15" tall where the # HP44VR you were originally looking measures 66" long x 9" wide x 19-3/4" tall. You will need to measure the other fender on your trailer to make...
view full answer... - Replacement Fender for 2016 Diamond Cargo T/A Enclosed TrailerFor replacement fenders on your 2016 Diamond Cargo T/A we have the Tandem Axle Teardrop Trailer Fenders # HP64VR. These are the closest match to your current dimensions at 68" long x 9" wide x 17" tall. In most cases you aren't going to find an exact match so you want to do your best to match the existing dimensions. These have a 16-gauge cold-rolled steel construction and can be bolted or welded on for installation. They are only available as a pair so you would have a spare if you're...
view full answer... - Tandem Axle Trailer Fenders For 15" Wheels With Tires 60" From Front to RearYou will want the Tandem Axle Teardrop Trailer Fenders # HP44VR for your trailer. These fenders are 66" long, 9" wide and designed for 14" and 15" wheels. These will give you the necessary clearance with having the tires 60" from front to back. We do have the Backing Plate # HP82FR if you need to have one with your trailer. These are sold individually while the fenders are sold as a pair so be sure to order 2 to fit on both fenders.
view full answer... - Recommended Replacement Fenders for Tandem Axle TrailerWhen replacing fenders you want to do your best to match the dimensions of your old fenders. Although it is slightly taller, the # HP44VR is going to be the closest match to what you previously had. These measure 66" long x 9" wide x 19-3/4" tall and work with 14" and 15" diameter wheels. Since the length and width match, and it is only 1-3/4" taller, these will work well as a replacement.
view full answer... - Availability of 67" Long 10" Wide Diamond Plate FendersThe closest thing we have will be either the 68" long 9" wide fenders like the # HP88VR and HP64VR. We also have the 66" long 9" wide # HP44VR. Unfortunately we do not have any that measure 67" x 10". Nothing in diamond plate either. The # HP88VR are stainless steel, and the others are raw steel that will need to be primed and painted.
view full answer... - Recommended Metal 66" Long Tandem Axle Trailer FenderThe two best trailer fender options we offer in the size you need are as follows: Tandem Axle Teardrop Trailer Fenders part # HP44VR - 66" long x 9" wide x 19-3/4" tall -Steel Tandem Axle Teardrop Trailer Fenders part # HP34VR - 65" long x 9" wide x 15" tall - Stainless Steel They are both made in the USA options.
view full answer... - Availability of Trailer Fender that is 9 inches Wide and 66 LongWe have that fender size with part # HP44VR except this isn't stainless steel. We do not have a stainless option at this time.
view full answer... - Looking for 65-1/2 x 9 x 18 Inch Tandem Axle Trailer FendersWe can come pretty close to the 65-1/2 x 9 x 18 fenders you mentioned. The etrailer.com brand Tandem Axle Trailer Fenders, part # HP44VR are designed for 14 or 15 inch wheels, and measure 66 x 9 x 19-3/4, which are only a fraction of an inch longer and less than 2 inches taller than what you mentioned. These would be the closest thing we offer to the dimensions of your current fenders, but they're close enough that they'd work well for you.
view full answer... - Widest Teardrop Trailer Fenders Available for a Tandem Axle TrailerThe Tandem Axle Teardrop Trailer Fenders # HP74VR are our widest fenders at 10-3/4" wide. The fenders are 72" long as opposed to the Tandem Axle Teardrop Trailer Fenders # HP44VR that are 66" long but only 9" wide.
view full answer... - Where to Measure for etrailer Tandem Axle Fender WidthHey Kirk! We measure from the outside to the outside on the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers # HP44VR (see attached photo).
view full answer... - Will The CE Smith Single Axle Trailer Fender Fit On a Tandem Axle Trailer? The CE Smith Single Axle Trailer Fenders # CE19504-2 were never intended to be mounted in this type of fashion, but it looks like it could be doable but will require modification. I recommend considering install some Steel Tandem Fenders # HP44VR. While these are the fender size for a 14" wheel like the fenders you found you will want to measure your setup to ensure the fender will fit. Each fender is 65" long, 9" wide and 15" tall. We also have the Backing Plate # HP82FR
view full answer...
- Availability Of A 62" Long 9" Wide Teardrop FenderWe do have some potential options for you, but I am afraid we do not have a teardrop fender that measures exactly 62" long 9" wide. The closest thing we have will be the # HP94VR fender which is a 65" long 9" wide teardrop fender. I am not sure exactly what kind of trailer you are working with, but if you have room to go a bit longer on the fender this will be the best option. They are also available in stainless # HP34VR. From there the next closest size is a 60" long 9" wide # HP22FR....
view full answer... - Correct Backing Plates for etrailer Tandem Axle Teardrop Trailer FendersThe Backing Plate for Tandem Axle Trailer Fender # HP82FR you mention is the correct backing plate for both the Tandem Axle Teardrop Trailer Fenders - Rounded Edges # HP94VR and the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers # HP44VR.
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Video by:
Dustin K
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Monica
5/1/2024
After a year, the fenders do have rust spots, even though, we undercoated, rust- proofed and painted.