What Leaf Springs Will My 2004 Shorelandr SLR20L For A 2004 Lund Alaska Need
Question:
Im looking to replace the leaf springs on a 2004 shorelandr boat trailer SLR20L that has a 2004 Lund Alaska ss boat. it looks like a 5 leaf spring and i measured bolt to bolt and it was 22 , but i cant see to find one that size. do you know what size I should have on there? i bought trailer used so not sure if these are correct. looking to put correct spring back on. Thanks
asked by: Curtis
Expert Reply:
I was able to do some research and your leaf springs measure 21" from center to center. The replacement springs you will need are the Dexter Axle Double Eye Leaf Spring for 2,000-lb Trailer Axles - 21" Long, part # 072-017-00 These springs are rated at 2,000 lbs. Even though you will only get three leaf springs, the weight capacity is more that enough for your boat trailer. Unfortunately, after taking a look at your photos, you may need to replace your trailers axle hangers.
You will need something like the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 9/10" Rear, part # APS5, but this is something that you will have to measure.
I have included product description links, a video demo link, and links to replacement axle hangers that should replace your existing hangers below.
Products Referenced in This Question
Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-1/4 Inch Long
- Painted
- Dexter
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Q&A: Replacement Leaf Spring to Replace Spring that Measures 21-3/8 inch
- Q&A: Replacement Leaf Spring Options for a 3500 Pound Dexter Axle
- Q&A: How Does Trailer Leaf Spring Get Measured to Pick Out Replacement
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: springs
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Q&A: Replacement Hubs and Bearings for EZ Loader Boat Trailer
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1 Review
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Springs - 072-017-00
- Search Results: hubs
- Search Results: bearing
- Search Results: bearing seals
- Search Results: akihub~545~2~ez~2k
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Q&A: What Spindle Does Trailer Hub AKIHUB-545-2-G-2K Use
- Search Results: hub kit
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: location
- Q&A: Does the Dexter 072-017-00 Double Eye Leaf Spring Include Bushings
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Shop: Trailer Hitch
- Video: ABS Fasteners Trailer Shackle Bolt Locknut Review
- Video: EcoHitch Invisi Trailer Hitch Installation - 2020 Subaru Ascent
- Shop: Trailer Wiring
- Shop: Cabin Air Filter