Are Bushings for Trailer Suspension Spring Hangers Required
Question:
I noticed that the APS1 and I believe the APS4 and 5 rear hanger has a bushing installed, but the APS2 doesnt. I am trying to keep the height of my trailer as low as possible, so the shorter shackles included in the APS2 will work better for me. Are the bushings installed to increase the strength of the hanger? Are they necessary? Why are the installed on some hangers and not others?
asked by: Dave
Expert Reply:
Bushings do not always have to be used. Springs typically have bushings or they will use wet bolts depending on which part of the suspension system it is but not always. The bushings limit the wear on the suspension components. There are just different designs. Kits # APS2 and # APS5 use the same 7/8 inch hangers and it is those hangers that come with the bushings. I have included a link to our help article on double-eye trailer suspension for you.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: CE Smith U-Bolt - Galvanized - 4-13/16" Long x 2-1/16" Wide x 1/2" Diameter - Qty 1
- Search Results: galvanized hub
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: shackle strap
- Search Results: 3500 lb axle and spring kits
- Article: Double-Eye Trailer Suspension System Review
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
- Search Results: 30~20
- Search Results: aps5
- Search Results: timbren
- Search Results: aps1
- Q&A: Orientation of Rear Hanger Installation on a Trailer with Double Eye Leaf Spring Suspension
- Article: Where to Position the Trailer Axle?
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: Spring Hanger Dimension Recommendations for Installing a e34SR Leaf Spring
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Recommended Front and Rear Suspension Enhancement for 2006 GMC Sierra 3500
- Video: Review of Lippert Anti Billowing Kit Solera Slide Out Awning - LC78FR
- Shop: Brake Controller
- Video: Review of etrailer Trailer Leaf Spring Suspension - 1 Leaf Double Eye Spring 6000 lbs Axles - e46SR
- Video: Double-Eye Springs Wet Equalizer Bolt Installation
on Trailer Suspension Parts
