Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs

See what our Experts say about this Fulton Accessories and Parts

• Available Sizes of Trailer Jack Caster Wheels
  For an industry-standard round tube jack the largest caster wheel we have is a 6-inch size made for a 2-inch trailer jack inner tube, like the Dutton-Lainson part # DL22539 you referenced. Most such caster wheels are rated for 1200-lbs. This and similar caster wheels for 2-inch jack tubes are shown on the linked page. We do not offer adapters or spacers to enable these to fit other tubing sizes. The other page displays all of our bolt-on jacks with wheels. We do have complete jacks with...
  view full answer...
• Recommended Caster Wheel for Old Fulton Jack with 1-5/8 Inch Inner Tube Diameter?
  The Replacement Caster Wheel for Ultra-Fab Manual 2" Trailer Jack - Qty 1 # UF49-954035 will fit an inner tube diameter of 1-3/4 inches. This will be the best fit for your inner tube with 1-5/8 inch diameter. The Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 # DL22414 is another option that measures 1-13/16 inches on the inside.
  view full answer...
  
• Measurement of Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack
  The Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs # F500266 is a component that is designed specifically for use with the Fulton F2 Adjustable A-Frame Jack, # F1413250334 which has a tubing width of 2-3/4".
  view full answer...
• Recommended Replacement Trailer Jack Caster Wheel for Aliner Camper
  We do offer replacement trailer jack caster wheel assemblies for three diameters of jack tube, 1-3/4-inch, 2-inch and 2-1/4-inch. I linked a page that will show you all such items from Pro Series, Shelby and others. I checked the camper parts catalog on the Aliner website but they do not specify any details about the brand, model, capacity or tube diameter of their OEM jacks. The Fulton Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jacks # F500266 that you referenced fits...
  view full answer...
• Can Bulldog Rack and Gear Jack be Mounted so the Handle is More to the Front of the Trailer
  Technically, yes, you can position and bolt down Bulldog rack and gear jack # BD018155 with # BD018006 so that the handle winds at the front of the trailer instead of to the side but it may not be the best fit. For what you want to do I recommend the Fulton F2 jack # F1413250334 which has more mounting options and a round bracket for a better fit. To this jack you can add a single wheel # F500266 if you wish.
  view full answer...
• Replacement Caster Wheel Recommendation for Fulton F2 Jack
  For a single caster wheel for a Fulton F2 jack # F1413250334 the correct part number is # F500266.
  view full answer...
• Outside Diameter of Shank Portion of Caster for F500266 Fulton F2 Adjustable A-Frame Jack.
  The 'sleeve' or shank portion of the Fulton # F500266 caster assembly is meant to be compatible with Fulton F2 trailer jacks, which is why it's kind of oddly shaped. At the widest point, that sleeve is 2-1/2 inches in diameter, as shown in the photo I've edited for you.
  view full answer...
  
• What Is the Difference Between Bolt Patterns on Fulton F2 F1413020134 and F1413050334
  Yes. The bolt patterns that were referred to in the videos are actually the same and in reality the .06" is a negligible difference that falls within a reasonable margin of error; I believe that on the # F1413050334 measurements were performed with a calipers where the measurement on the # F1413020134 were performed with a tape measure/ruler. These two jacks are extremely similar but the # F1413050334 has a locking mechanism on the handle to eliminate the handle free-swinging when you...
  view full answer...
• Replacement Caster Wheel Assembly for Fulton F2 Trailer Jack
  For a replacement caster wheel assembly for your Fulton F2 jack you can use part # F500266. This caster assembly uses a single wide 8-inch wheel and offers a 1600-lb capacity.
  view full answer...
  
• Replacement Wheel Assembly for a Fulton F2 Trailer Jack
  Thanks for the picture, it looks like you have the Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134 in which you'd need the Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack # F500266 for a replacement.
  view full answer...
  
• Replacement Wheel for Fulton F2 Adjustable A-Frame Jack
  Yes, the Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack part # F500266 is a direct replacement for that wheel on your Fulton F2 Swing-Up Trailer Jack part # F1413140334. In order to lock this wheel in place, you will also need to install our Fulton Wheel Wedge Kit for F2 Swing-Up part # F500133.
  view full answer...
• Is Fulton F2 Trailer Jack # F1413250334 Appropiate for A-Frame Car Hauler
  I can't answer that for certain without the weight of your trailer or dimensions of your current jack but it sounds appropriate. You need a jack rated high enough to hold the trailer when it's loaded and the 2,000 pound rated Fulton F2, part # F1413250334, with the wheel, part # F500266, is probably enough. You only need the jack to hold the trailer's tongue weight which is likely fairly high when loaded by not too high for this setup. Since the wheel is rated lower than the jack your...
  view full answer...
• A-Frame Trailer Jack With Wheel Attachment
  You can get the Fulton F2 Adjustable A-Frame Trailer Jack # F1413250334 but take some measurements to see if it will fit in your A-Frame coupler. I've included a diagram for you! The plate that mounts to your A-Frame coupler is 5 inches in diameter and the coupler opening needs to be more than 2-3/4 inches in diameter. Yes, the wheel attachment # F500266 is an accessory. This jack can support 2,000 lbs without the wheel and 1,600 lbs with the wheel. Since the wheel is held in by a pin...
  view full answer...
  
• Is 8" Wheel Available for 2-1/4" Outer Tube Diameter Trailer Jack
  The only 8" caster wheel we have is for a Fulton F2 jack with the Wide-Track Wheel Assembly # F500266. This does have a cross-pattern style attachment though so if you have something other than a Fulton F2 it won't work and you'll need to stick with a 6" wheel like what you referenced with part # JC-101.
  view full answer...
• Recommendation for Replacement Jack Foot for a 5,000 Pound A-Frame Trailer Jack
  Sounds like your trailer's weight is too heavy to support the use of a jack caster wheel. I would instead recommend the Pro Series Footplate # PS1400700340. This has a capacity of 5,000lbs and will fit the 2 inch jack tube diameter. The Wide-Track Wheel Assembly for Fulton F2 # F500266 that you referenced would be a good choice if the jack you had a Fulton F2 A-frame jack # F1413250334. Since you do not have an A-frame F2 jack I would not recommend it for you, because it is specially...
  view full answer...
• Available Caster Wheel Trailer Jacks
  The Fulton Wide-Track Wheel Assembly # F500266 is designed specifically to fit Fulton's F2 jack; it has a special tubing design that is not fully round so it will not work on other standard round tube jacks. The other jack wheels we offer are designed to fit jack tubing of 2-inch or 1-3/4-inch outer diameter. Those caster wheels are shown on the linked page. I also linked our main page for wheeled jacks in case you want to install a whole new jack. You can click on the jack type at the...
  view full answer...
• Available Trailer Jack Caster Wheels
  You can see all of our available jack caster wheel assemblies on the linked page. These fit on a 2-inch-diameter jack tube, such as # BD500245. If you can find a brand name or part number on your jack that will help to narrow down the correct parts, but as long as the tubing diameter matches up you should be fine using a different brand of wheel. We have plastic wheels in various dimensions, such as the 6-inch # JC-101 and also a steel wheel # JC-102.
  view full answer...
• Replacement Fulton F2 Pull-Pin Swing-Up Caster Wheel Trailer Jack
  Thank you for the photos of your friend's Fulton F2 trailer jack that has a broken caster wheel assembly. I wish I had better news for you but my contact at Fulton advised that this jack cannot be serviced. The entire unit will need to be replaced. We do carry the Fulton 1600-lb-rated F2 Swing-Up Trailer Jack # F1413040134 which will bolt on to the existing installation point.
  view full answer...
  
• Solution to Easily Maneuver Trailer Around without Tow Vehicle with 930 lb of Tongue Weight
  I do have one solution that will work great. The Trailer Valet XL part # TVXL25 (for a 2-5/16 inch hitch ball) or part # TVXL2 (for a 2 inch hitch ball), would be exactly what you'd want. These easily allow you to maneuver a trailer around without a tow vehicle. These attach to the hitch ball and give you a handle to steer and a handle to crank the wheel around. Otherwise for a trailer as heavy as yours you aren't going to be able to maneuver the trailer around easily on a wheel caster.
  view full answer...
• Why Do Electric Tongue Jacks Not Come with a Caster Wheel
  Caster wheels for trailer tongue jacks are typically rated for much less weight than standard foot plates. There is not a caster wheel rated for 3500-lbs; the highest-rated one we offer is the Fulton # F500266 which fits their F2 A-frame jack # F1413250334. This is why no electric tongue jacks come with a wheel.
  view full answer...
• How Does a Wheel or Footplate Install in the Fulton F2 Adjustable A-Frame Trailer Jack
  The Wide-Track Wheel Assembly, # F500266, fits a specific jack, the Fulton F2 Adjustable A-Frame Jack, # F1413250334. The assembly slides up into the bottom of the jack tube and the pin goes through the holes. There is no cutting or welding required. I made a video showing the installation of a wheel in the jack for you. If you are trying to install the wheel on a different jack, it will not be compatible. If it is a different jack model, let me know what it is, and I can see if there...
  view full answer...
• Will The Fulton Wide-Track Wheel Assembly # F500266 Fit Wells Cargo 2 Inch Jack Tube
  I do have a solution for a replacement wheel for your standard 2 inch jack tube, but the Fulton Twin-Track Wheel Assembly, part # F500266, will not work. This wheel assembly is designed to specifically fit the Fulton F2 jacks only. For a replacement wheel, you will need to use the Pro Series Detachable Caster, part # PS1400750340, which will fit your 2 inch jack tube and has 1,200 lb capacity.
  view full answer...
• Bulldog Powered Drive A-Frame Trailer Jack Wheel Add-On
  For your Bulldog Powered Drive A-Frame Trailer Jack # BD500187 I recommend the Bulldog Removable, 6" Poly Caster Assembly for 2" Jack Tube # BD500245 but this will drop your overall weight capacity to 1,200lbs. For a weight capacity of 1,600lbs I recommend Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter product # F500266. You'll be able to easily slide off the drop leg and hook the wheel on with each of these products. I've attached videos going over the...
  view full answer...
• Is Fulton Wheel Assembly Compatible With Square Tube Jack
  Due to the unique configuration of the Fulton Wheel Assembly # F500266, it would not be compatible with a square 2" jack; I am not aware of a caster wheel assembly that will fit a square 2" jack tube, mostly because those jacks have higher weight ratings which means they only use foot plates like what you said you have. That means you would need to continue to use something like the Drop Leg with Foot # TJD-7000-FT which is 2" x 2" and has a 7,000 lb capacity.
  view full answer...
  

Do you have a question about this Accessories and Part?