XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span
(195 reviews)
Price: $46.54
In Stock
XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span
Item # SHP2040-XL
Retail:$48.99
Our Price: $46.54
You Save: 5%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (195)
- Q & A (0)
- Photos
Lets Go Aero Trailer Hitch Lock - SHP2040-XL
- Fits 2-1/2 Inch Hitch
- Universal Anti-Rattle Lock
- Keyed Unique
- Lets Go Aero
- 3-1/2 Inch Span
- Chrome
- Spring-Loaded Pin
This secure anti-rattle hitch lock dramatically reduces movement and vibration in your towing setup. Extra-long pin fits wide 2-1/2" GM and 2" Toyota hitches. Designed for use with hollow-shank ball mounts and accessories. 5/8" Pin.
Features:
- Trailer hitch receiver lock is used in place of standard pin and clip to prevent theft of ball mount or hitch-mounted accessory
- Secure your bike rack, cargo carrier, hitch cover, and more to your trailer hitch
- Anti-rattle pin reduces play and vibration in the hitch connection
- Place block with spring inside shank of ball mount or hitch accessory
- Slide ball mount or accessory into hitch receiver
- Insert pin through hitch pin hole and anti-rattle block with spring
- Twist pin so ball mount or accessory is pulled tight against side of hitch receiver wall
- 90-Degree, barrel-style lock swivels for easy access in tight spaces
- Includes 2 rubber-capped, stainless steel keys
- Weather-resistant rubber dust cap keeps cylinder free of debris
- Extra-long pin accommodates wide factory 2" hitch receivers from Toyota and 2-1/2" hitch receivers from GM
- Chrome finish is self-lubricating and corrosion resistant
- Sturdy steel construction
Specs:
- Application: 2-1/2" x 2-1/2" trailer hitch receivers
- Also fits wide factory 2" Toyota hitch receivers and 2-1/2" GM hitch receivers
- Ball mount or hitch accessory must have a hollow shank
- Pin diameter: 5/8"
- Inside pin length (span): 3-7/8"
- Overall length: 6-3/4"
Note: This device can only be used with hollow-shank ball mounts and hitch accessories.
The Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory. The unique design features a sturdy steel block with an attached spring that sits inside the shank of your hitch-mounted accessory.
Place the block inside your ball mount or hitch accessory, and line up the hole in the block with the pin hole in your ball mount. Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just twist the pin to tighten it down. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch. No more annoying clanking or vibrating.
The 90 degree lock goes on the end of the anti-rattle pin to provide security for your hitch-mounted accessories. It swivels for easy access in tight spaces. Two rubber-coated, stainless steel keys are included with the lock. A sturdy rubber dust cap comes attached to the barrel lock so that you can easily cover the lock cylinder, thus ensuring that no dirt or grime will get in to damage the lock.
SHP2040-XL Let's Go Aero Silent Hitch Pin Extra Large Antirattle Device and Lock for 2-1/2" General Motors and 2" Toyota Trailer Hitches
Replaces SHP 2040-XL and SHP2040XL
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span - SHP2040-XL
Average Customer Rating: 4.7 out of 5 stars (195 Customer Reviews)
This secure anti-rattle hitch lock dramatically reduces movement and vibration in your towing setup. Extra-long pin fits wide 2-1/2" GM and 2" Toyota hitches. Designed for use with hollow-shank ball mounts and accessories. 5/8" Pin.by: Gregory07/02/2023
Super fast delivery, great instructional videos, excellent products! The anti rattle hitch pin in combination with the BW hitch is outstanding! Hitch works great with GMC multi pro tailgate.
by: Ryan 04/10/2024
Finally found a lock that will work on the new Toyota Sequoia hitch. You should add the Sequoia to your description, I know others have had issues finding on that works. Great service as always.
by: Robert05/30/2019
I recently got a 2019 Tacoma SR5 and needed to purchase a locking pin for an adapter I purchased for my mtb rack that fits 1 1/4”. I first bought the standard size locking pin for this brand, the one that is about an inch shorter. It wasn’t long enough for my 2 inch receiver so I had to return it. I then re-purchased this XL version which is about an inch longer. This works perfectly as I can now fit the locking mechanism on the end of the pin. If you have a 2016+ Tacoma, then you need this locking pin to fit the receiver. Happy so far as I just tested it out today and had no wobble.
by: Ken07/24/2023
Bought this to extend my bike rack away from the truck camper door. Added a anti rattle clamp and yhe setup has been perfect.
by: Michael09/06/2023
The lock nut will not retain the tightness desired to keep the hitch quiet, disappointed to day the least.
by: GOOD HITCH LOCK.11/19/2014
I have a CURT CL-3 hitch # 13650 and this hitch lock was the only one that fit. It needed the XL size. My hitch has 2 holes on the receiver. One on the left and one on the right side. The left side is a small hole with threads and the right side is a bigger hole and this lock fits. Easy to install and works well. Ships fast.
by: David 03/21/2024
Great item
Best Costermer service in the Buisiness.
by: Michael 08/19/2023
Love this hitch lock. Works well.
by: Daniel 01/24/2024
It’s still works as advertised.
by: Guy08/25/2020
No more Rattle in my case. i keep one 5/8 key in my trunk to remove trailer hitch
by: Kenneth 07/10/2023
Much nicer than regular rattling hitch pins, plus more secure.
by: Ronald 08/12/2021
Perfect fit for my needs.I have a 2 1/2" receiver with a reducer to 2" and there is no rattle of any kind even with an extension of 14" (to be able to open tailgate) and the bike rack.
by: John10/07/2022
Great product and keeps our bike racks from rattling around with the hitch reducer. Held up will over the past year.
One thing to keep in mind is that this style anti-rattle lock will NOT work with bike racks or other attachments unless they are hollow. That being said, it will NOT work with any Kuat rack or extension unless you remove their internal anti-rattle mechanism.
by: Tom04/23/2020
At first I thought how is this going to work? But once I read the instructions, the product is she pretty ingenious. Went together very easy and works great.
by: Herold08/28/2020
This product was bought to allow me to use my Reese Eclipse bike rack on my 2500 Dodge Ram truck. The truck came with the standard 2.5 hitch package and the original anti rattle pin only fits a standard 2 inch hitch. Now to wait for my next trip to try this lock and pin set up.
Herold
8/28/2021
After a year the lock is working great. I wish I could use it more but the pandemic has slowed my travel plans.
by: Ginger05/31/2018
Fair for light duty. Works when used to tow my boat or bike trailer.
But when I put one on my tow hitch to tow my truck behind our motorhome it didn't last ill be trip.
The threads locked up and it had to be cut off.
Unfortunately I bought a few of these before I discovered how weak they are.
Mike L.
5/31/2018
Lets Go Aero recommends using a petroleum-based lubricant on the threaded portion of the lock to prevent it from seizing.
by: Jackie R.04/12/2016
So far, so good. The receiver lock was a little difficult to install, had a hard time getting it to thread initially, was rather frustrating, but after taking it out and putting it back in a couple of times, we were able to finally get it to tighten. Then we were unable to get the key out of the lock unless we loosened it about a half turn with a wrench - so looks like we will have to be sure we have the right size wrench in the toolbox if we ever need to take it off because when it is tightened securely, you can't get the key to come out of the lock. Other than that, it seems to work great, no rattle and the lock is definitely secure. The cap over the lock is a great feature too.
Jackie R.
4/12/2017
Nope - had to literally destroy it the 2nd time we tried to take it off, couldnt get it to unlock. Total trash.
by: Michael 09/25/2023
No noise or rattling around at all. This is well worth the time and money.
by: Arnold12/18/2020
Unfortunately I was not able to use the actual locking mechanism to antirattle due to the way my hitch was set up but I did use the pin with the locking cap and the sleeve that goes over the actual pin itself disintegrated within three months of use. Even though the locking cap had a rubber cover over the keyhole it still needs to be lubricated Several times in order for me to be able to continue using the lock because it would stick and not be able to open.
Overall it was a poor quality and poor design in my opinion.
by: Jack 12/04/2020
This locking anti-rattle pin is the best! So great that I have bought three over several years. Will not rust, looks good though years of service. Highly recommend!
Jack
12/5/2021
Still working great, looks good too! No matter which trailer is hooked up no rattle! Recommend!
by: Tim 08/19/2023
No more hitch rattling. Even on our gravel road.
by: Jack 03/15/2023
Holds the insert tight in the receiver so no rattling when not in use. Very solid and seems well made.
by: Dennie A.07/28/2020
I have had no problems with the hitch pin.
The rubber cover has served its purpose well even in the winter time by keeping moisture out of the locking mechanism and keeping it from freezing.
I have also pulled a unsullied trailer across country using this pin and it has performed its job well. It is also quick and easy to take on and off.
by: Steve 05/12/2020
I purchased this anti-rattle locking hitch pin to quiet the rattling draw bar that I have my Rock Tamer mud flaps hanging on. I tow a fifth wheel trailer, so there is not enough weight on draw bar to keep it from rattling in the receiver. This pin is very easy to install and does the job perfectly. I purchased the 2" version 2 years ago for the cargo rack at the back of the trailer, and it still works like new. It can be difficult to find accessories for the 2-1/2" receiver, but etrailer.com always comes through for me.
25
195
Show More Reviews
See what our Experts say about this Lets Go Aero Trailer Hitch Lock
- 3 Anti Rattle Hitch Pin For A 2020 Ford F-250 Super DutyFor your 2020 Ford F-250 Super Duty I recommend the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span Item # SHP2040-XL. This pin fits a standard 5/8" hitch pin hole which is the same on class three, four, and class five hitches.
view full answer... - Will the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 Fit My 2" ReducerThe Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span # 63232 could fit on your 2" reducer but it will depend on how the reducer fits onto your 2 1/2" hitch. If the holes for the reducer lines up with the holes from your hitch, the lock will not fit. If the reducer's holes are away from the holes on your hitch it will fit. If the holes from the hitch and the reducer do line up, you will need the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches - 3-1/2" Span...
view full answer... - How to Stabilize Roadmaster Hitch Mounted Spare Tire Carrier for 2-1/2" Hitch ReceiversAbsolutely! I have 2 different recommendations to keep the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening - 2-1/2" Hitches # RM95MR stabilized during travel, and it just depends on what exactly you're looking for. If you don't have a hitch pin yet then I recommend going with the XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL which not only keeps the carrier stabilized but it gives you a lock so you have peace of mind with the carrier as well. For a simple...
view full answer... - Anti-Rattle Trailer Hitch Receiver Lock Compatible with B&W Tow & Stow 2-1/2" Ball MountWith the B&W Tow & Stow 3-Ball Mount # BW54FR all the pin points allow for some movement and as you use the mount the paint inside the components will wear away and cause for additional movement over time. We do have the XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL which will help eliminate the play between the receiver on your 2018 Ram 2500 and the ball mount. This will not eliminate all the play in the ball mount since it does have the additional pins.
view full answer... - Locking Hitch Pin for 2-1/2 Hitch ReducerYes! We have some options like the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881. You can use it with your other etrailer lock and have it keyed alike if you have a reducer that extends out with two hitchpin holes on each end like # HR26. Note that this adapter that also extends will reduce your capacity by a third. If you want another anti-rattle lock though, there is the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches # SHP2040-XL which has a nut and spring...
view full answer... - Swing Away Hitch Bike Carrier Setup for 2017 Ford F-250 with Truck CamperUsing a 2-1/2-inch to 2-inch hitch reducer sleeve like # C45405, # BWRHXA2182 or # DTADP35 will allow a 2-inch accessory to fit in your 2-1/2-inch hitch but these Thule and Yakima bike racks you mentioned include their own anti-rattle locks that will not fit the 2-1/2-inch hitch tube. There is another solution to give you the swing-away feature you need for camper access. You would still use one of the reducer sleeves above (or one of the others on the linked page) and add the Yakima...
view full answer...
- Solution for a XL Anti-Rattle Trailer Hitch Receiver Lock that Won't ReleaseIt sounds like some corrosion may have worked it's way into the latching mechanism of the XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL that you have installed on your truck. The best advice I can give would be to liberally apply a spray lubricant like WD40 to the lock and the locking mechanism so that that it will free it up and allow it to release. Maybe some light tapping with a rubber mallet will help as well. After letting the lubricant set on the lock for a while I would...
view full answer... - Anti-Rattle hitch Pin that Can be Used to Tow a TrailerWhen towing a trailer you can use the Let's Go Aero anti-rattle hitch lock, # SHP2061. You can use # SHP2061 even if the pin does not go all the way through the shank. The clip is just a fail safe. Provided the pin is properly tightened down then the lock washer will provide tension to keep the bolt from backing out. The pin, if threaded all the way in, measures 4-1/2 inches from the outside of one pin hole to the tip of the pin. It is 3-3/4 inches to the notch for the clip so it would...
view full answer... - Troubleshooting Hitch Lock on SportRack SR2415 and a 2017 Toyota TacomaThe SportRack Ridge Swing 4 Bike Rack # SR2415 has the Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches # SR0901 as you referenced as a related part. I have not heard about this not working on this rack before and that is the longest locking pin available for that rack, which makes me wonder if your trailer hitch receiver is uniquely wide. If so, you may want to consider using an adapter for the rack like Hitch Extender for 2" Trailer Hitches...
view full answer... - Anti-Rattle Device for Weigh Safe Ball Mounts for 2-1/2 Inch Trailer HitchesYou are correct, you would not be able to use locking anti-rattle device # SHP2040-XL on a Weigh Safe adjustable ball mount for 2-1/2 inch hitches because of the solid shank. And that is why we do not recommend it as a related product on any of the 2-1/2 inch Weigh Safe ball mount pages. For anti-rattle you would need to use something such as the Blue Ox Hitch Immobilizer, # BX88225, which takes out accessory movement within the receiver vertically and horizontally rather than just one...
view full answer... - Anti-Rattle Device For 3 Inch Ford F-450 Hitch Receiver I have an XL Anti-Rattle device # SHP2040-XL that will work with your 3 inch hitch accessories. This anti-rattle with work ONLY with hallow shanked accessories like the this B&W Adjustable Ball Mount # BWTS30037B.
view full answer... - Locking Anti-Rattle for Blue Ox Adjustable Ball Mount with Clamshell for 2-1/2" HitchYes! To add both anti-rattle and a lock to the Blue Ox Adjustable Ball Mount with Clamshell for 2-1/2" Hitch # BLU79XR you need the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches # SHP2040-XL. This has a block insert with a threaded center that's used for the anti-rattle part so it only works with ball mounts that have a hollow shank like what we find with this ball mount.
view full answer... - Anti-Rattle Lock Recommendations for Use with Curt Hitch Extenders # C45058For the end of the Curt hitch extender part # C45048 that fits into the 2-1/2 inch hitch the best lock/anti-rattle device is the part # SHP2040-XL which you mentioned. Then for the 2 inch side you'd want the part # 63232 and you'd be set.
view full answer... - Anti-Rattle Device for a 2-1/2 Inch Trailer Hitch on a 2009 Chevy Silverado 2500The Roadmaster Quiet Hitch, # RM-062, does fit 2-1/2 inch receivers like the one on your 2009 Chevy Silverado 2500 but it is made for flat towing only (towing a vehicle behind a motor home) and is not rated for towing. Towing a trailer produces more tongue weight than flat towing a vehicle and this device is not rated for the additional stress. Other customers have used the Blue Ox Hitch Immobilizer, # BX88225, which stops rattle horizontally and vertically. Or you could get a lock and...
view full answer... - Anti-Rattle Hitch Lock for 2016 Toyota Tundra with Wider Hitch TubeFor an anti rattle hitch lock to fit the wider hitch on your 2016 Toyota Tundra the best option is the Anti-Rattle Trailer Hitch Lock # 63232 which has a usable span of 3-1/2 inches or even the # SHP2040-XL for a 3-7/8inch span. I attached a review video of these for you to check out as well.
view full answer... - How to Use Flint Hill Goods Cargo Carrier With 2 Shank in 2-1/2 HitchI believe you are asking about an adapter, and you can use the Curt Cargo Carrier with Ramp, which has a 2" shank, in the 2-1/2" receiver of your 2017 Chevy Silverado 2500 simply by using Hitch Reducer Sleeve # C45405. This reducer sleeve will insert into your 2-1/2" hitch and that's all you would need. I do strongly recommend using anti-rattle hitch lock # SHP2040-XL to secure your investment and keep the vibration and rattle to a minimum. I've added links to video reviews of each of...
view full answer... - Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Receiver With Hollow Shank Ball Mount/AccessoriesThe XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL is our largest threaded locking hitch pin bolt. This is designed to be used with 2-1/2" hollow shank hitch accessories. It has an inside span of 3-7/8". I recommend using Loctite Anti-Seize Stick # LT37616 to make removing the parts easier.
view full answer... - Will 2-5/8-Inch Span Anti-Rattle Hitch Lock # 63232 Fit 2014 Toyota Tacoma Factory Hitch ReceiverThe Anti-Rattle Trailer Hitch Receiver Lock you referenced, part # 63232 from Lets Go Aero, has a center span of 2-1/2 inches, which is not wide enough for the OEM hitch on your 2014 Tacoma. We do offer hitch locks that have longer center spans that will work with the wider hitch receiver tube on your Tacoma. We offer our extra-long hitch lock, part # e98881, which is rated highly enough for even Class V applications. This lock has a 5/8-inch pin with a center span of 3-5/8-inches. This...
view full answer... - Why Does XL Anti Rattle Hitch Lock Stop Using Tube KeyThe older tube key style for the XL Anti-Rattle Trailer Hitch Receiver Lock # SHP2040-XL was replaced with the flat key style which in general lasts a bit longer in this type of outdoor application. Tube keys tend to have issues with corrosion over time that prevents them from working.
view full answer... - Recommendations to Correct Ball Mount Rattle in Hitch ReceiverI recommend taking a look at the XL Anti-Rattle Trailer Hitch Receiver Lock, # SHP2040-XL. This is designed for use with a hollow shank ball mount and will help to reduce the "rock and roll" that you are experiencing. I have included a short video for you.
view full answer... - Anti-Rattle Hitch Pin for a 2-1/2 Inch Trailer Hitch Using a Reducer SleeveFor the 2-1/2 inch trailer hitch using a reducer sleeve you will need an anti-rattle device with a longer pin to compensate for the wider hitch. I recommend the XL device # SHP2040-XL. It functions as anti-rattle devices and locks.
view full answer... - Sleeve of Silent Hitch Pin SHP2040-XL Doesn't Pass All The Way Through ReceiverThe sleeve of the # SHP2040-XL lock isn't meant so fit all the way through the receiver, if it did, it wouldn't allow the threaded square nut to tighten against the inside of the ball mount or hitch accessory. The up and down movement should be eliminated, I'd recommend rechecking the torque and making sure your torque wrench is correctly calibrated, as they do need to be recalibrated periodically. You can find information on this online.
view full answer... - Can an Anti-Rattle Device be Used with the Round Tube Hitch Step with Light # CR-600LED The Round Tube Stainless Steel Trailer Hitch Receiver Step with LED Lights # CR-600LED has a metal, hollow, 2 inch shank. Your # SHP2040-XL will work with it, but since this is the longer version of the lock it will stick out a bit further like I am sure you have noticed already. Normally we would recommend the part # 63232.
view full answer... - 3 inch Hitch Anti-Rattle Device RecommendationFor an anti-rattle device that can be used on a 3 inch hitch application we have the XL Anti-Rattle Hitch Lock part # SHP2040-XL which would go into the shank of your 3 inch hitch an can be used with a sleeve adapter as well.
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Chris R
Installed by:
Andrew K
Installed by:
Matthew K
Installed by:
Cole B
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Brian B
Updated by:
Wilson B
Updated by:
Matthew S
Video by:
Andrew L
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ronald
8/13/2022
Still works great and looks new.