Anti-Rattle Hitch Pin for a 2-1/2 Inch Trailer Hitch Using a Reducer Sleeve

Question

Question:

I have a 2 1/4 set up that you put a sleeve in making it a 2inch receiver. Will the anti rattle work with this set up. ? SHP2061.

asked by: John

0

Expert Reply:

For the 2-1/2 inch trailer hitch using a reducer sleeve you will need an anti-rattle device with a longer pin to compensate for the wider hitch. I recommend the XL device # SHP2040-XL. It functions as anti-rattle devices and locks.

expert reply by: Michael H

0

Answer 1

It looks like the Brophy Hitch Reducer and Extender, part #HR26, could work for your application based on the numbers. However, this isn't something I recommend for you since the addition of an extender not only reduces your towing capacity, it…

view full answer...

Answer 2

The Brophy Hitch Reducer and Extender part #HR26 may work to allow you to travel with the tailgate down however it is enough extension to travel with the tailgate down and tow a trailer without interference. This adapter option also cuts the tongue…

view full answer...

Answer 3

On the Brophy Hitch Adapter #HR26 the distance between the two hitch pin holes is 7-inches, from hole center to hole center. Overall length end to end is 12-inches. Please note that using this extension will reduce your hitch's weight capacity by…

view full answer...

Answer 4

The reason is pretty simple. The Blue Ox #BX88132 is specifically designed for flat towing and has been rigorously tested for that purpose. The Patriot Hitch #PH54FR adjustable drop receiver adapter has NOT been tested for flat towing a vehicle,…

view full answer...

Answer 5

No, its not but I have a better option. Instead of the Anti-Rattle Hitch Pin for 2" Trailer Hitches item #SHP2061, I recommend the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches item #e99007. This can be used with any 2" ball…

view full answer...

Answer 6

This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches #SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that #SHP2061 includes the pin sleeve that helps reduce the…

view full answer...

Answer 7

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 8

You will need to use the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long #126B2. Replacement bolts for the #MR46ZR are not available so this is the only option.

view full answer...

Answer 9

Yes, you can absolutely travel on the highway at highway speeds using the Curt Cargo Carrier #C18113. This is a great option for a cargo carrier because it is aluminum so it is extremely lightweight at just 25 lbs, making it much easier than other…

view full answer...

Answer 10

Sportframe is the brand name Draw-Tite uses for some of its Class 1 trailer hitches. It doesn't denote a special fit or design. For your vehicle we offer both Class II hitches (1-1/4 inch receiver tube) or Class III hitches with a 2 inch receiver…

view full answer...