Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this hitch immobilizer to keep your ball mount or hitch-mounted accessory from rattling and shifting in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.
Features:
Specs:
Nearly every hitch setup suffers from a bit of slip. This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Quiet Hitch to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.
Just slip the Quiet Hitch over your tow bar, hitch adapter, ball mount, or other accessory. When you slide the accessory into the hitch receiver, position the U-bolt around the collar on the bottom of your hitch receiver. Then place the bar on top of the accessory shank and tighten the nuts onto the U-bolt. As you tighten the Quiet Hitch, the shank of your accessory will be pulled down towards the bottom of the receiver opening, thus securing it in place within the tube.
Benefits for a Tow Bar
Using an anti-rattle device, such as the Quiet Hitch, is recommended when flat towing a vehicle. Besides reducing wear and tear on your tires, hitch receiver, and tow bar, using an anti-rattle device can help prevent more serious problems. A small amount of free play at your hitch may not seem like much, but this sway is magnified the farther back you go. A little movement at the hitch translates to a lot of movement at the rear of your towed vehicle. By using the Quiet Hitch, you eliminate this sway at the source.
Note: If you have a towing setup that includes a drop receiver or a high-low adapter, use 2 immobilizers to make your system as secure and rattle-free as possible. Use 1 Quiet Hitch at the connection point between the adapter and your hitch, and use the other where your tow bar slides into the adapter.
Average Customer Rating: 4.8 out of 5 stars (1112 Customer Reviews)
Use this hitch immobilizer to keep your ball mount or hitch-mounted accessory from rattling and shifting in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.Seems to work. 3k miles in rain and snow and no noticable corrosion yet. I like the design since allows to be installed up or down orientation, which helps when having a dual hitch extender and needing to dodge interferences.
Great to secure the trailer ball tongue to the hitch receiver. No more clanking and noises.
This adapter is only for round pins. If the 7-pin connector on your vehicle has flat blades instead of round pins, this adapter will not work.
I'll give it five stars because I expect it works fine, I just didn't realize I needed to check the pins. No fault of the part.
This is exactly what I was looking for and required less than two minutes to install. The cylindrical profile allows it to accommodate both common geometries found on ball mounts - I.e. flat surface and 90-degree angles. It does cost more than other devices you can find, but IMHO it’s worth it!
I just bought a new bike rack for my E-bike, and in order to be able to put the tailgate down with the e-bike on the rack, I had to install a 7" extender on to the 2" hitch. The bike rack already had a anti-rattle device built in, but the 7" extension moved around a lot, making my e-bike sway real bad while on the road. A simple and excellent fix was installing the Quiet Hitch, an Anti-rattle Ring. After I installed it, the bike rack was solid as a rock. Installed in just a few minutes, and very well made. (Of course, it's made in the good old USA.). Made by Roadmaster. Good Job!
Good addition to add extra support 2” E-bike receiver hitch. The Swagman bike carrier is a great hitch but I wanted the extra security being on the back of our trailer.
James
7/26/2023
Excellent result in eliminating the excess hitch clearance that leads to additional movement of the e-bike rack. Rock solid piece of mind when going down the road.
After searching and bought other anti-rattle brackets only to find out that these did not fit, this one has been the only one I found that fits the width of my hitch extension. I am satisfied with this product. It is easy to put on and off between trips.
After a long review of available products to reduce rattle on my low-tongue-weight job trailer, I settled on this unit as my only hope. I had to install it upside-down (nuts down) because the safety chain anchor rings on my Jeep Renegade block access to the lower lip on the receiver. Even so, it eliminated the greatest part of the awful rattle, bringing the problem down to a truly acceptable level.
Grand B.
9/30/2017
After a year, the hitch rattles slightly more than it did when I first installed it yes, the torque is still proper but still nowhere near as bad as it did before I purchased it.
We have a small pop up camper on our 4WD truck, We fabricated a top step using a plate(step tread) welded on a draw bar. The step moved slightly because the draw bar was not secure. The Roadmaster "Quiet Hitch" removed all the "wiggle" in the step and has removed the extra movement out of our tow hitch ( we tow a Suzucki Samurai).
Jim M.
12/27/2017
Thanks for for following up . Quiet Hitch QH is continuing to work out great.
I order the roadmaster quiet hitch from E-trailer and it seems to be working OK, it's taken out about half of the wobble on my hitch Accessory. I give E-trailer of 5 star for shipping it out, it only took about a week. And I give the product about 4 stars because it is built sturdy and seems to be working OK.
Matt J.
7/25/2019
Ive had to replace both nuts on both sides due to the fact they just did not seem to tighten down and stay tight. I went ahead and bought hardened nuts instead and they seem to be working out. It still only keeps the rattle down to about 50 or 70 but its better than nothing
The product is effective beyond my hopes. All the rattling of my 6" drop hitch has stopped when under load or just driving without the trailer. I couldn't be happier.
Doug O.
4/19/2020
Still works great with no rattles. Still looks new after repeated dips at the boat ramp.
Easy to install, only took a couple minutes and solved my noise and tolerance problem between trailer hitch and receptacle.
Perry A.
7/29/2018
Still working great, a solid extension of my truck!
A year later and this anti-rattle hitch product still works great with a variety of bicycle and motorcycle hitch carriers I have been using. Great product.
The quiet hitch has proven to be an excellent purchase. Not only does it reduce the noise of the luggage rack rattling while driving, but it also keeps the luggage rack from shaking and therefore, keeps the luggage more secure. I highly recommend purchasing this item if you are going to be attaching a luggage rack to your hitch. I have not hauled anything with the tow hitch, and therefore don't have any experience to rate in that area.
Thank you for the fast reply and shipment you are ALWAYS there when needed
I just fitted the Blue Ox towbar, for 6 inch, drop/rise, receivers. Also, the, Roadmaster quiet hitch lock, for 2 inch hitches. Both are excellent products, strong and very well made. There is no movement, with my new hitch lock in place. Two pictures included, showing both, attached to my Subaru Ascent, the drop hitch now sits at 15 1/2 inches above the ground. I will send more pictures of the lights, also purchased from etrailer.com when my mobility scooter carrier is completed.
This product has been flawless. I have a hitch extension with a riser, attached to a hitch swing out mount and then attach a 3 bike rack to that. The point is my set up puts a huge amount of stress on this anti wobble device and it has handled it perfectly. Did I mention I’ve driven this set up hundreds of miles off road? Washboard roads and plenty of off road in Baja Mexico. I originally tried one of the flat steel plate anti wobble devices, it ended up bending. I can not recommend this round anti wobble device enough!
I ended up using a 7-1/2 inch Roadmaster extender along with a Roadmaster 4" Hi-Lo adapter to tow our Jeep with our motorhome. I used 3 of the quiet hitch brackets to stabilize the extensions and tow bar. We towed for the first time this weekend for about a 170 mile round trip. The Jeep tracked perfectly behind the motorhome. I had to make several hard stops due to lights changing and cars pulling into traffic unexpectedly. There was absolutely no noise or hitch bounce. They are easily installed. I highly recommend this product.
This invention is exactly what I needed. I pull several trailers and also a camper. It takes all the clunk and rattle out of the hitch. Its the real deal!
Donald
5/9/2019
It still works great and I would not pull one of my trailers without it!
Having a Jeep with a hatch you get a lot of trailer noise inside of the vehicle. I bought this product hoping to reduce that sound and it works flawlessly. It eliminates the clunk of the hitch moving around especially with a light load. Plus it also adds a little extra security with the hitch when parked somewhere with your load. Great product!
The Roadmaster Quiet is one Great item, in fact I have both the 2' And the 1'1/4 for my JEEP my boat trailer my bike rack and my basket rack that goes from a 1"1/4 to a 2" the Quiet Hitch keeps all my receivers very stable and quiet, as before I had wobble and noise, just a GREAT item !
Simple and functional.
I use it with a dual reviewer hitch to carry my bike (one up USA) while I pull my camper. No clanking or rattle, and the bike doesn't flop around.
Jcs
5/22/2017
1 Year, many trips, still working great.
THIS SIMPLE, INEXPENSIVE DEVICE WORKS EXACTLY AS INTENDED. IT STOPS THE MOVEMENT OF THE HITCH IN THE RECEIVER WHICH PREVENTS DAMAGE/ELONGATION OF THE HITCH PIN HOLE. I WIPED OUT THE RECEIVER ON MY LAST TRUCK BUT AFTER 2 YEARS WITH THIS DEVICE, MY NEW ONE IS STILL LIKE NEW. IT ALSO HELPS A LITTLE AS AN ANTI THEFT DEVICE.
Recent purchase of a Pro Series Cargo Carrier 63153. Assembly of the carrier was very straight forward but when installed into the 2" receiver, there was too much play at the receiver for my liking. Jonathan at etrailer recommended the RM-061 Quiet Hitch and got it to me while away on a trip. Installation was easy and it completely eliminated all the play. Now the cargo carrier acts like it is part of the truck, not and add on, a perfect solution!!
Good product, simple and does as it says. We full time rv and I installed one of these on our hitch that pulls our car behind our rv. 14,000 miles and still going strong. No rattles, no slop.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
9/30/2020
The quiet hitch is still working as good as the first day I put it on. Its been a slow year, with the flu and all, but I expect it to be a great tool for years to come.