Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
(2463 reviews)
Price: $49.72
In Stock
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Item # 40202
Retail:$70.34
Our Price: $49.72
You Save: 29%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (2463)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch Ball Mount - 40202
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 4 Inch
- Rise - 3 Inch
- No Ball
- 10000 lbs GTW
- Class IV
- Draw-Tite
- Steel Shank - Gloss Black
- 1-1/4 Inch Ball Hole Diameter
Sturdy steel ball mount with hollow shank measures 11-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction with hollow shank
- Black powder coat finish covers a-coat base for superior rust protection
- Hitch pin and clip or hitch lock sold separately
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 10,000 lbs
- Tongue weight: 1,000 lbs
- Length: 11-1/4" from center of hitch pin hole to center of ball hole
- Rise: 2-3/4" from top of inside of hitch opening
- Drop: 4" from top of inside of hitch opening
- Ball hole diameter: 1-1/4"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
40202 Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10,000 lbs
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
Customer Reviews
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K - 40202
Average Customer Rating: 4.9 out of 5 stars (2463 Customer Reviews)
Sturdy steel ball mount with hollow shank measures 11-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.by: Noah01/13/2024
Did not fit my application been sitting on a shelf
by: Cristian10/29/2017
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant.
Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
by: John 03/28/2024
Outstanding customer service!
by: John09/30/2020
I received my Oder in two days! Wow that was quick!
Sorry I took the picture before tightening the ball and installation
by: Anna05/19/2018
After balking at the cost to have an auto-shop add a trailer to our Toyota Highlander, we found etrailer.com and decided to take a chance. The "how to" videos factored considerably in our decision to buy ... they made it look so easy! And surprise! It really -WAS- that easy. We used standard block-type ramps (the kind you can buy for $40 ) to get the SUV up off the ground high enough to get underneath to do the work. Everything came off as easy as it was showed in the videos. Other than the fact this bar is a heavy so we had our teen daughter help hold it steady while we bolted it into place (i.e., get help for when you go to lift it), it went super smooth. Thanks for saving us $280 over the cost the car dealer quoted us! P.S. - be sure to watch the linked videos so you get the right trailer lighting attachment and ball hitch for your new hitch.
Anna
5/20/2019
We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.
by: Anna05/19/2018
We bought this ball-hitch accessory to go with our new trailer hitch. The linked videos were super-helpful to figure out the proper hitch for our pop-up camper vs. our small utility trailer (height is important).
Anna
5/20/2019
We are very happy with our trailer hitch, and all the accoutrements that we purchased with it. Your videos were enormously helpful, the hitch went on easily with a bit of help from our teenage daughter to lift it up into place, and we recommend your business to friends when they express an interest in getting a camper.
by: Tom O.04/08/2019
The hitch kit components I purchased are serving me well: excellent quality and pricing was lower than other companies I researched. However, the real value for me was etrailer's technical support prior to placing my order. I didn't know exactly what components I needed to adapt my vehicle's existing hitch kit to support a used trailer I purchased and etrailer figured that all out for me.
by: Terry A.10/08/2017
Good quality products packaged very well for shipping. Arrived in great shape.
Would have been a fantastic order except for the following:
Ordered this 10k, 4" drop ballmount as well as a 12k, 2" ball to go with it. Problem is, the 10k ballmount has a 1 1/4" hole and the 12k ball has a 1" shank. Therefore, I need a 1 1/4" x 1" bushing for proper installation. Being a trailer company, you would think that a red flag would appear indicating the discrepancy during ordering, or better yet, just throw a bushing in with the order! A $2 part and to get it from etrailer I would NOW have to pay shipping for it! My total order was for $120 and I got free shipping.
Always room for improvement.
by: Richard S01/03/2014
The ball mount connects my 4x4 Ford Van to my Keystone Zeppelin 271 travel trailer. I needed a mount with a 3" drop and 10,000 lbs capacity, which this unit supports. It works as expected and needed.
by: Susan 11/29/2020
We were very satisfied with the trailer hitch and ball we ordered for our daughter and son-in-law. The correspondence we received from the people at etrailer.com was wonderful and over and above what we have come to expect from vendors. We were in retail for 20 years and enjoyed being treated like we treated our customers, it doesn’t happen much these days. Thank you!
by: John N.11/21/2015
The Draw-Tite ball mount is top quality, but my experience with eTrailer was even better. The product pricing, including shipping, was better than I could get locally. The customer service is absolutely the best. "George" was in touch with me electronically from start to finish and shipped my hitch with a higher priority so that I received it much sooner than I expected.
by: CINDY01/28/2016
This is exactly what we needed. We needed a long shaft to use with the mud flaps. The quality is very good. I am very impressed with etrailer as I place my order in the afternoon thinking it wouldn't be processed until the next day. They processed my order that evening and I got my hitch within 2 days.
by: Noah04/18/2018
I have bought a higher truck so it hasn't been used in the last three months, but when it was in use it performed as it should and was of good quality. The paint was of high quality and didn't chip. It was a snug fit so it didn't flop or rattle in the receiver.
by: Dave07/12/2016
Extra long hitch fits snug in the receiver. Much less rattle than the short hitches. Great selection. Delivered ahead of schedule. Another great experience from the team at eTrailer.
by: Dan06/30/2022
Very good, heavy duty, works well with my tow guard/protector.
by: Gary04/14/2018
I was in need of a special length ball mount for my new 350 Ford to keep my tailgate from hitting every time I lowered it. After talking with Erica she was able to find just what I needed. I will use etrailer for all my truck and trailer needs.
by: JamesT.09/22/2014
A nice heavy duty ball mount. The finish is good quality and should last for years.
by: Guy02/20/2018
etrailer was the only place I could find one with correct rise for what I needed and it's attached to my truck all the time busting shins and occasionally pulling my trailer.
by: Ed N09/10/2014
The reciever was what I ordered, it was shipped very quickly.
by: Warren08/24/2020
This looks like the product I was expecting to receive. Heavy duty. Have not used it yet but I look forward to towing it behind my super C rv.
by: Erich 07/31/2021
Great prices and selection. Customer service had excellent communication who were fast and helpful.
by: Stephen02/14/2015
Missed the fact that you have to order pin separately, seems silly not to package them together, have to have a pin. 5/8" btw.
by: Mb04/12/2019
High quality product and seller
by: Randy08/28/2018
Always great products and service. Lots of options to choose from.
by: Ernie09/07/2016
Great product at a great price and delivered in a few days.
Thank You
25
2454
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount
- Parts Needed to Tow 30-Foot/6500-lb Trailer with 2010 Ford F-150First you'll want to check your Ford owner's manual to confirm your particular truck, with its specific mix of cab style, engine, transmission and suspension components, has the required towing capacity for your 6500-lb trailer. If you cannot verify this in the manual your local dealership can look up the truck's VIN to confirm its tow rating. I checked the online manual for the 2010 F-150 and on pages 256-258 the towing capacities of the different configurations are listed. Trailer weight...
view full answer... - Trailer Hitch, Ball Mount, Ball, Wiring, and Brake Controller for a 2012 Nissan NVThe Draw-Tite trailer hitch # 75715, does not come with any additional accessories. To complete the towing set up, you will need a ball mount, a ball, a pin and clip, and trailer wiring. To activate electric brakes on a trailer you would need to add a brake controller and 7-Way trailer connector. If the trailer has surge brakes then the brakes will activate when the vehicle brakes with no additional parts needed. For a ball mount, you can use # 40202, and for a pin and clip use # PC3....
view full answer... - How to Choose the Correct Ball Mount for a 2006 Lincoln Navigator with Factory Trailer HitchIt looks like the 2006 Lincoln navigator came with a factory 2 inch trailer hitch receiver. This means that you can use any ball mount for a Class III hitch that has the correct rise or drop to tow the trailer level. You will need to take some measurements to determine what rise or drop you will need. I have included a link to our FAQ that explains how to measure. Having about 4 inches of a ball mount that is 8 inches long inside the actual receiver of the hitch is not a problem provided...
view full answer... - Excessive Noise From Weight Distribution System With Sway ControlFor your weight distribution system, I would recommend the Curt Weight Distribution Shank, part # 17120. This shank fits 2 inch receivers and allows you to make adjustments from a maximum 5-5/8 inch drop to a maximum 8-7/8 inch rise. Concerning the noise on your system. You will experience some noise with a friction sway control system. If you feel it is excessive, it could be caused from the sway control being too tight. The handle will only turn the sway control on or off, and should...
view full answer... - Recommended Ball Mount with 4 Inch Drop and 10,000 Pound Towing Capacity The Curt Class III Ball Mount with 2-5/16 Inch Ball # C45042 referenced in your question has a maximum towing capacity of 7,500 pounds. For a ball mount that will provide the same 4 inch drop and give you a 10,000 pound capacity, I recommend the Draw-Tite # 40202. This sturdy steel ball mount is compatible with 2 inch hitch receivers and also features a tongue weight of 1,000 pounds. You will just need to add a compatible 2-5/16 inch hitch ball like # 19286. I have attached a short...
view full answer... - Does the Curt Trailer Hitch #C14002 Allow the Spare Tire to Function on 2011 Ford F-150After confirming with Curt, their Class IV 2 inch trailer receiver # C14002 does not interfere with the accessibility of the spare tire. However, they do recommend removing the spare tire for the installation process, and then replacing once installation is complete. Please note that this hitch does not include a ball mount, trailer ball, pin and clip, or wiring. Depending on your exact towing needs I would suggest the following parts that are compatible with your 2011 Ford F-150: ...
view full answer... - Ball Mount Recommendations for a 2012 Ford Expedition Towing a Pontoon Boat or Seadoo TrailerYou have a couple of options. First, you can buy two ball mounts, one with the correct rise for the pontoon boat and one for the Seadoo trailer. Or, you can get one ball mount that use a 2-1/2 inch rise, # AMSC2HD, and that would be fine for both trailers. If you wanted to go with separate ball mounts, for a 3 inch, use # 40331. You do not have to use that extra sway control bracket welded to it. Another option is to use an adjustable ball mount like # TK5007. It has a max rise of 9 inches...
view full answer... - Trailer Hitch Recommendation for 2013 Nissan NV 3500 VanI'd recommend the Draw-Tite Class IV hitch, part # 75715. The hitch has a 7500 lb towing/1125 lb tongue weight capacity. If you're looking for a higher capacity Class IV hitch, go with the Curt Class IV hitch, # C14000. This hitch has a 10,000 lb towing/1000 lb tongue weight capacity, although you'll be limited by the towing capacity of the van if it's lower than the capacity of the hitch. You might also need the following to complete your towing system: Trailer wiring harness, part #...
view full answer... - Best Way to Carry 2 Dirt Bikes That Weigh 400LBS With a 2013 Chrysler Town and CountryI have another recommendation as our etrailer Trailer Hitch Receiver # e98854 is only rated for up to 400lbs of tongue weight when equipped with a carrier like the Black Widow that you are considering. Currently there are no other receivers available with a higher capacity for a carrier. I recommend using a Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. This trailer has a bed that is 88" long and 52" wide which will be able to haul your two bikes that weigh 400lbs. Since the...
view full answer... - Trailer Hitch, Wiring, and a Brake Controller for a 2016 Nissan NV 3500 Passenger VanDraw-Tite trailer hitch # 75715 fits all models of the 2016 Nissan NV 3500 passenger or cargo vans so I recommend it. I have included a link to the installation instructions and a link to a video showing an example installation for you. The trailer wiring harness # 118553 also fits all models. I have linked a video showing an example installation of the wiring harness as well. It will need to be installed first to add a 7-Way using # ETBC7. I have included some links that show and explain...
view full answer... - Ball Mount or Weight Distribution Hitch Recommendation for a 2008 Toyota Tundra and 5K TrailerFor a 2008 Toyota Tundra, the recommended ball mount is the Curt Ball Mount, # D-4 and Hitch Pin and Clip, # PC3. However, you will probably want to go with something with a higher capacity given the weight of your trailer. I have included a link to our ball mount FAQ article that has some tips on choosing the correct ball mount. Since you were using a weight distribution hitch, I recommend replacing it with a different type of weight distribution. For a trailer weighing 5,500 pounds gross...
view full answer... - How to Determine Correct Ball Mount for Tow Vehicle and Trailer. In order to choose the correct ball mount for your tow vehicle and trailer, you will first need to take a couple of measurements. With your tow vehicle parked on level ground, take a measurement from the ground to the top of the trailer hitch receiver. Then with your trailer on level ground, measure from the ground to the bottom of the coupler. If the hitch height on your vehicle is greater, you will want to find a ball mount with a drop. If the coupler height is greater, you will want...
view full answer... - Options for Towing a Boat Trailer and Carrying a Bike RackI may have a solution for you, however, our ball mount manufacturers do not currently offer a dual hitch receiver with a 4 inch drop. One possible solution would be to use a longer ball mount with a 4 inch drop like the Curt Extra Long Ball Mount, # D-26, and use a towing bike rack like the Swagman XP Towing Bike Rack, # S64955. This bike rack wraps around the shank of the ball mount and can carry up to 3 bikes. The tongue weight capacity of the Hidden Hitch ball mount is 600 lbs, so...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Brandon M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Mike S
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
1/13/2024
I wanted to ask in what way did the ball mount not work for you. Did you need a greater rise or drop?