Excessive Noise From Weight Distribution System With Sway Control
Question:
Hi, Just installed Pro Series Weight Distribution System w Friction Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW on my 2003 Dodge Ram 2500 Quad Cab 4X4 short bed and 1996 Fleetwood Prowler 23LV. I need about another inch and a half on the hitch bar to level the trailer - which bar would you recommend? When I turn, the friction sway control bar makes a grinding/binding noise. How do I fix this?
asked by: Rich S
Expert Reply:
For your weight distribution system, I would recommend the Curt Weight Distribution Shank, part # 17120. This shank fits 2 inch receivers and allows you to make adjustments from a maximum 5-5/8 inch drop to a maximum 8-7/8 inch rise.
Concerning the noise on your system. You will experience some noise with a friction sway control system. If you feel it is excessive, it could be caused from the sway control being too tight. The handle will only turn the sway control on or off, and should be tightened until it is in a level position. The bolt under the handle allows you to adjust the tension. If there is too much tension, it increases the friction and could cause more noise. You should do a series of road tests. Adjust the tension by 1/4 turn in either direction until the desired degree of sway control is achieved.
Also, the instructions state that the center of the ball on the sway control ball/plate assembly should be 24 inches from the center of the hitch ball when the trailer is connected. If it is positioned at a different length, this could be causing the problem by putting additional stress on the unit. I have linked you to an installation video for sway control.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Draw-Tite
more information >
Continue Researching
- Search Results: ultra~fab
- Q&A: Does Truck Bed Need to be Empty When Setting Up a Weight Distribution System
- Search Results: exterior trailer lights
- Shop: Rubber Bumper for Enclosed Trailer Ramp Door - 2-1/2" Diameter
- Shop: Ultra-Fab Steel Jumbo Roller for Trailers and RVs - Weld On - 2-1/2" Wide x 3" Tall
- Q&A: How Do I Convert My Incandescent Trailer Lights to LED Lights
- Shop: Lippert Underchassis Double Bin Storage Unit for RVs - 99-1/2" Long
- Search Results: 12 x 12 roof vent cover
- Shop: Ceiling Garnish for Ventline Roof Vent - 3-1/8" Leg - 14-1/4" x 14-1/4" - Polar White
- Shop: Ceiling Garnish for Dometic FanTastic Roof Vent - 6" Leg - 14-1/4" x 14-1/4" - White
- Shop: Ceiling Garnish for Ventline Roof Vent - 2-1/8" Leg - 14-1/4" x 14-1/4" - Polar White
- Shop: Ceiling Garnish for Ventline Roof Vent - 5-1/8" Leg - 14-1/4" x 14-1/4" - Birch White
- Search Results: m337fr
- Search Results: skid roller
- Q&A: Are Brophy Trailer D-Ring Tie Downs # RR05 Suitable for Use on a Car Trailer
- Search Results: sway control
- Search Results: curt sway control
- Video: Review of CURT Trailer Hitch Ball Mount - Shock Absorbing Towing Kit - C57DR
- Shop: Floor Mats
- Video: Camco RV Exterior - Gutter Parts - CAM42323 Review
- Video: Camco RV Rain Gutter Spouts with Built-In Extensions Review
- Video: Review of MORryde RV TV Mount - Full Motion TV Wall Mount Bracket - MR93ZR
- Shop: Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Ram Trailer Tow Prep Package
- Q&A: Will Gen-Y 5th Pin Boxes Void The Lippert Frame Warranty
- Shop: Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Video: Curt Fifth Wheel Kit Installation - 2020 Ram 2500
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box