Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sturdy steel ball mount with a solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Polyurethane interior acts as a shock absorber to reduce vibration. Powder coat finish protects against rust.
Features:
Specs:
Convert-A-Ball ball mounts are designed with a polyurethane interior that helps to absorb road shock to limit bouncing and vibration while you tow over rough terrain. It also reduces the slamming and banging that occurs during stops and starts. This helps to protect your vehicle's driveline, your hitch assembly, and your trailer's contents while you're towing.
This Convert-A-Ball ball mount meets or exceeds THMAV-5 ratings in all categories and meets SAE standard J-684.
Average Customer Rating: 4.9 out of 5 stars (1224 Customer Reviews)
Sturdy steel ball mount with a solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Polyurethane interior acts as a shock absorber to reduce vibration. Powder coat finish protects against rust.Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack.
But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon.
Thanks etrailer for a great experience !
Does take some of the shock out of pulling my wagon I use to mice corn!
Already own one of these ball mounts and it is excellent. Got a new vehicle and needed a drop hitch/ball mount to tow a trailer correctly.
We used this on our 2012 Sienna AWD to pull the largest single axle closed top U-Haul trailer to move furniture and bikes 400 miles through the mountains of PA, WV, and VA with no trouble. I noticed less jerking from the hitch being transferred to our van than the last time I towed a trailer like this (though that was with a large sedan). Easy to install and seemed to have decent tolerances in regards to fit and finish. Definitely increased my confidence in towing with a light duty vehicle.
Everything arrived and was in good shape. The cushioned hitch worked really well as I use it to pull a parade wagon with a bunch of musicians on it. The previous hitch bounced enough that they complained about it. This hitch does a good job of dampening the start and stops. Everyone's happy and the music goes on!
Robert
6/23/2019
Still works well and the music continues.
Nice product, would definitely recommend if you do a lot of towing.
purchase to tow motorcycle on vac. this ball mount is built very well. it stopped the bounce on section lines in the road. also works well with brake controller. does not affect backing. stopped metal bang at startup.the only concern about the reciever stem doesn't seem to go as deep into the reciever. its still secure just sticks out further
These cushioned ball mounts are awesolutely awesome. I don't even know my trailer is behind the truck unless I look. They eliminate all the slamming and jerking of your tow vehicle you get with a regular hitch. I sold all my regular hitches and only run with cushioned ball mount hitches. I have the 2" and 4" drop mounts. I won't hesitate to buy a 6" or 8" drop cushioned ball mount should I ever need one. Do your tow vehicle a big favor and get one of these. You'll be glad you did too......
This is my second bar with shock absorber I've purchased from etrailer - I really like how they function especially when stopping and starting .
Chaz S.
8/25/2018
Still working well. No issues. I do need to unload my older one that is to much of a for the f150. Thinking Craigs list or something.
Will never buy another hitch without the cushion. It saves wear on the transmission jarring, and greatly smooth's out the ride. I actually will be ordering more for pulling wagons on the farm, as this one it ordered is set-up for the trailers with 2-5/16" ball.
Definitely would recommend to anyone who pulls a trailer.
I am using the convert-a-ball with a 2 5/16 ball to pull a tilt bed car trailer. The 4 in. drop levels the trailer to perfect. There are no sharp jolts loaded or empty because of the cushioning effect. Great product.
Would not tow without one. I have overloaded on private property numerous times, and it still has not deteriorated the cushion. Makes regular towing much smoother. This unit, rated at 10k, with about 7500 lbs behind it, made my trailer feel a lot nicer then it is. If you spend big money on a trailer, no reason to use anything but these cushioned mounts.
Great product and a Huge fan of the Cushioned Ball Mount System. Fast and simple. Excellent customer service received from E-Trailer! Package ordered shipped within the 3 days I selected. I would and have recommended E-trailer for their products. Thank you
I have several of the convert-a-ball cushioned hitches!!! They are very strong and provide a cushion when starting and stopping. This lessens the shock to your vehicles drive train and makes your vehicle ride a little more smoothly and you feel less vibration from your trailer or whatever you are towing. I have visted their plant and seen their quality control. They test their products to the extreme!!!!!!!!!!! MADE IN THE USA !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have used this product in the past. My new truck needed more drop. So I went from a 2inch drop to a 4 inch drop. I pull a 9500 pound boat. When I haul I have confidence when using this product. I like the idea of a cushioned hitch. I also use the convert a ball on the stinger.
I already had one of these cushioned ball mounts and bought a second so I can keep one with each of my trucks. Excellent product, noticeably quieter and smoother towing, and a high tow and tongue load rating. You get what you pay for.
E-trailer shipping time and customer followup are tops. I have bought a lot of items from them and never yet been disappointed.
This is these second time ordering a cushioned ball mount from etrailer. It's the best mount out there because when you're attached to a trailer, it feels as if it's not attached. No more bouncing around. Fast shipment and excellent packaging.
Very well built & seems to dampen the push n pull effect that my trailer has while hauling tractor & bush hog. Another great product from convert a ball..
I am very happy with my purchase. Shipping on my items was very fast & packaged well. This hitch isn't the only item I purchased. I like all the items I received from you. Everything I purchased was made of very good qaulity material. And competative prices.
I would recommend buying from you to others !
eTrailer is the best! Fast ship and no problems
I'll be using the heavy duty hitch to haul my 5,500 lb boat and trailer from Texas to Michigan this spring.
The cushion feature in the hitch is great. For a heavy boat trailering it is a pleasant experience.
Works great. Very happy with this hitch.
Great product! It may be a little strong for my smaller trailers (3000#) but it still gives a little to provide a smoother ride.
Great product. Simple compact design. Dampens movement between tow vehicle and trailer. Makes for a smoother towing experience.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Doug
9/21/2016
I love the product. I already had or own an ball mount and the convert a ball setup. That is the reason I purchase another one but with the four inch . I have and will to continue to recommend the product.