How to Choose the Correct Ball Mount for a 2006 Lincoln Navigator with Factory Trailer Hitch
Question:
What is the recommended mount? The hole for the pin on the receiver only allows about 4inch of an 8inch ball mount to sit inside the receiver. Is this a problem? It looks like the ball mount sticks out too far!
asked by: Bill W
Expert Reply:
It looks like the 2006 Lincoln navigator came with a factory 2 inch trailer hitch receiver. This means that you can use any ball mount for a Class III hitch that has the correct rise or drop to tow the trailer level. You will need to take some measurements to determine what rise or drop you will need. I have included a link to our FAQ that explains how to measure.
Having about 4 inches of a ball mount that is 8 inches long inside the actual receiver of the hitch is not a problem provided that the ball mount being used is designed to fit a 2 inch receiver and that it has the correct rise or drop and capacity.
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Draw-Tite
more information >
Continue Researching
- Video: Review of etrailer Trailer Leaf Spring Suspension - 3 Leaf Double Eye Spring 4000 lbs Axle - e57SR
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure for Trailer Hitch Drop
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: 25-1/4 Inch or 26 Inch 4,000 lb Double-Eye Spring For Trailer With 25-1/2 Inch Eye Spacing
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: 40 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Q&A: How to Determine Correct Replacement Axle For 2003 Ranger Boat Trailer
- Q&A: Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
- Search Results: morryde suspension upgrade kit
- Search Results: e57sr
- Search Results: axle to spring mounts
- Search Results: 25 1 4 leaf spring
- Search Results: equalizer
- Search Results: axle mounts
- Search Results: equalizer upgrade kit
- Q&A: Can Taller Trailer Suspension Equalizer Increase Trailer's Ride Height
- Q&A: Why Would Trailer Axle Shackles Flip Wrong Direction When Trailer is Unloaded
- Q&A: Is the Suspensino on My Tandem 3,500 lb Axle Trailer Messed Up
- Q&A: How to Measure Shackle Straps for an 18 Foot Tandem Axle Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: BOLT brand vehicle and hitch locks