Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so your trailer can be stored in even the smallest garage. Weld-on mounting creates a clean look, and the unique offset design guarantees superior performance.
Features:
Specs:
Use the table below to determine your maximum pivot length based on your trailer capacity. Pivot length is the measurement from the center line of the coupler ball to the farthest pivot hole.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (901 Customer Reviews)
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so your trailer can be stored in even the smallest garage. Weld-on mounting creates a clean look, and the unique offset design guarantees superior performance.The hitch is great, for its purpose. Can now fit boat in my garage. What I dislike about it is the front portion,ends up on a downwards angle (Not Level) when folded back against the trailer,Unlike my Bass Tracker trailer swing hitch which stayed straight and kevel when folded back. All I can guess is it has to much play, which allows it to hang lower than the main trailer body when folded back..Tracker trailers folding tongue,have 0 sag when folded and are level with the trailer..Not sure what kind of fold away they use. This coupler Was installed correctly. Also,the front portion has a very noticeable incline going up to the hitch when hooked to the truck while the rear portion and the rest of the trailer are level as should be..All a result of too much play in between the 2 parts..Main bolt is tightened all the way up..Who knows, maybe the incline is because there were No Bushing Provided in my shipment that are meant to be used for a buffer in between the 2 halves. Guess I'll have to spend another $xx on top of the high cost of this thing I already bought, just to get a complete unit..
Works great and allows trailer to fit in the garage. Doubles as extra security by locking hitch back against tongue. Would give 5 stars but fit was loose. Not too big of a deal but if you don’t brace across it while welding you’ll end up with a crooked, sagging tongue. Overall, good purchase and will definitely outlive the trailer.
its a gamechanger to have this installed on my boat trailer. no longer need to step over trailer tougue in garage.
As Expected.
etrailers videos on products are very informative and helpful.
I selected the weld on application for its clean appearance. The added expense of using a certified welder for the installation was well worth it, I'm very satisfied with the product and it looks as if it was factory installed. Always a pleasure dealing with etrailer and your prompt service.
Mark W.
11/1/2017
Very satisfied as it saves room in my garage, great product.
Outstanding product. Has worked perfectly once installed. Definitely a space saver, boat wouldn’t fit in garage without the hinge.
I have used two of these now on my two boat trailers. They work great! Just weld in place which is easy if you have the equipment and knowledge. Worst part is painting and redoing the wire harness. Has the added benefit of making the tongue a couple inches longer too which is a good thing for me. Makes a huge difference on storage requirements of boats on trailers!! I did use one on a 2.5" tube trailer, just cut a piece of 3" square tube 1/4" wall thickness and welded in-between. Worked great. I will use again for sure when I get a new boat!
One year ago I had a friend weld the fold away coupler onto my ShoreLand'r trailer because my boat would not fit in the garage. Now I can put the boat in a secured place and leave all of my gear in it without fear of anything walking off and the convenience of not having to move things in and out all of the time. I have pulled the boat many miles since then without any issues , thanks etrailer this has been a well worth purchase.
Ken B.
Wonder Lake, IL
The product worked very well for what I needed. I needed to lengthen the tongue of my trailer to get the boat deeper into the water when launching it but didn't want that to interfere with storing it in the garage. It was nice to have a chart that came along with it that gave length of tongue vs weight of boat so that you can more easily decide what length will work for your application.
Works as advertised. Good P solid on a trailer. Had an issue with the shipping. They immediately corrected it attention to detail. Customer service was excellent. That’s why I will keep coming back
Mr Bob Snellville Ga. This item is great , fit like factory . I welded it , painted and now the garage storage door closes. With the riding lawn mower . Thank you . But the birds , cats , possum, wasp and other critters can not live in my boat . I highly recommend this add on .
Was exactly what I needed, welded it up the day it showed up in the mail, now I can fit the boat trailer in the garage.
Great product, solved my issue of trying to fit the boat in the garage. Simple to install. Transaction with etrailer was excellent and the product arrived quickly. I will purchase from etrailer again.
Great fit,was just what I ordered.Gave me 34” off trailer for garage storage .
product looks good. Came without any directions or tips. Had to look up videos on installation. Have not installed it yet. Should be perfect when I get everything done. Thanks.
I purchased this Fold- Away Coupler Hinge for my Kayak trailer project I'm getting ready to do. The quality of this is piece is very good and I received it faster than advertised. This product will allow me to extend the tongue on my trailer and it will fold out of the way when parked.
D M.
3/21/2015
Fantastic, does exactly what I needed it to do.
Quality product, easy to install. Recommend a quality welder handle the mounting. Trailer pulls true with no movement from this swivel.
Sean P.
8/22/2018
They still serve me well. High quality that lasts
When you have a 19 foot trailer and a 17 foot garage, this is the answer to your problem! It took less than an hour for the pros to cut the tongue and weld the fold away into place. You do have to be careful not to toast the wiring and be prepared to cut and splice it. My jon boat now sits straight in the garage with a golf cart parked next to it and room to walk around both of them. Perfect!
this is a quality product with quality steel and hardware. This swing away feature
will allow the boat/trailer to fit in my garage
Karl I.
2/6/2018
no problems at all
I've had the folding tongue for a year now and appreciate it more every time I need to get into my limited storage space. I got the weld on unit and it was my first significant mig welder task. I had no trouble at all. It pivots smoothly into position when needed, then tucks back out of the way when I'm done. The only issue I had with it was figuring out the proper length of safety chain ) since it has to go behind the folding portion, and how best to attach the chain so it doesn't drag. A bit of trial and error solved that, though I wish this unit came with points of attachment for the chains
The trailer tongue hinge was as advertised and welded onto my boat trailer very easily. It has provided a means to have more space in my garage. I would highly recommend the great quality for anyone looking for a hinge on their trailer.
I was missing a small part from the manufacturer and etrailer was on it right away. Excellent customer service and additionally follow up.
I purchased folding tongue hinge a year ago. Needed it so i could close door on garage. Took to a weld shop it went on and welded togather with fram easily. I have pulled my boat many times and no problems. Make sure you install the rubber stops to limit play. Only complaint is it rust up if not painted.
EVERYTHING YOU SAID ABOUT THE ORDERING, SHIPMENT, FOLLOW UP THROUGH DELIVERY, ARRIVAL OF PRODUCT, WERE ALL RIGHT ON THE MARK. DOING BUSINESS THIS WAY IS A PLEASURE. IF ALL INTERNET SELLERS WERE LIKE YOU THERE WOULD BE MORE INTERNET SALES. THANK YOU FOR THE EXCELLENT SERVICE. (Luke)
Matt
5/25/2013
Very well written and I totally agree, Sir!
Luke C.
1/29/2014
I had the hinge welded on my trailer by a professional welder. I have had the boat and trailer out several times since, and the hinge performed beautifully. I am still very happy to have bought from you. Thank you.
Exact fit got it when o needed it payed for 2 day shipping got it the very next day, great quality and well made works perfect
Do you have a question about this Folding Trailer Tongue?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
7/13/2023
I am sorry to hear this. In order for me to better assist you, I would need some pictures of where it is sagging.