bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. Kit
  6. LED Light
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger

Item # TLL56RK
Our Price: $79.83
Trailer Lights
Shipping Weight: 3 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector. Great Prices for the best trailer lights from Optronics. LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger part number TLL56RK can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (334)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - TLL56RK

  • Tail Lights
  • Rectangle
  • Kit
  • LED Light
  • Red
  • 6L x 3-1/2W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Side Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.


Features:

  • Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide
    • Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light
    • Built-in license plate light on driver's side light
  • Waterproof housing and lens unit is submersible
    • Great for marine trailer applications
  • LEDs make great replacements for incandescent lights
    • No bulbs to replace
    • No brittle filaments
  • Corrosion-resistant license plate bracket
  • Durable polycarbonate housing and acrylic lens
  • Red lens over clear LEDs
  • Universal mount
    • Stainless steel mounting hardware included
  • 25' Wiring harness with 4-pole connector
  • DOT approved


Specs:

  • Application: trailers under 80" wide
    • Driver side: STL57RB
    • Passenger side: STL56RB
  • Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep
  • Number of diodes:
    • Driver's side: 23
    • Passenger's side: 18
  • Power draw at 12.8 volts:
    • Stop and turn lights: 0.268 amps
    • Side marker lights: 0.059 amps
  • Lifetime warranty on LEDs


Optronics TLL56RK LED Combination Tail Lights for Trailers Under 80 Inch Wide Diagram

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



TLL56RK Optronics LED Combination Tail Lights for Trailers Under 80" Wide - Submersible - 40 Diodes - Driver and Passenger Side - 25 Ft Harness

Alternate part number: TLL-56RK




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger - TLL56RK

Average Customer Rating:  4.8 out of 5 stars   (333 Customer Reviews)

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

by:

After some light disassembly, these fit perfectly under the OEM lens covers of our vintage 1976 apache ramada. LED everything now!



by:

Bright and works. One issue is right side passenger side blinks different and not as Bright as the left one.



by:

The lights came well packaged. All parts were included in a parts bag. I have some doubts as to the quality of the wiring connectors (3M 801). The white grounding wire is too short. I ran two additional lengths of ground wire directly to the lights and eliminated any trailer body induced grounding problems. The stainless bolts were 1/4" and I thought flat washers should have been included along with the stainless lock washers. I went to the local hardware store and purchased 4 each 1/4" flat washers to complete the installation. There was more than enough wire for my small PWC trailer. Installation was straight forward. The lights look very nice and are bright even in the daylight. Worth the purchase price.

Tom S.

10/27/2017

Thanks for the follow up email. Everything is fine and I am satisfied.



by:

Fit my boat correctly, worked properly, has a lifetime warranty.



by:

Very satisfied. E-trailer had the right fit as I am replacing the tail lights. They were here in a timely fashion.

Thankyou

Gary

6/17/2023

still working as they should thankyou



by:

DURABLE BRIGHT QUALITY. I've taken my trailer and these lights all around North America (California, Yukon, Texas, Key West, Newfoundland) they have never let me down.

Rob

6/21/2022

Bought these lights for my Karavan Double Sea-Doo trailer, excellent lights, better quality than the marina and better quality than the stock ones that came with it. Ver happy with them. All wiring was perfect and durable.



by:

Perfect size for small trailers. Arrived fast and in perfect condition.
Also purchased (and installed) two of the the Wesbar LED Trailer Clearance or Side Marker Light w/ Reflector - 1 Diode - Black Base - Amber Lens - 47-222012. Great products.



by:

Great product. I had to search a lot of different sites to find this size (roughly 6"x3.5") in a LED package because it had to fit my trailer bracket for the lights. As you can see in the picture the bracket protects two sides of the light so I needed the same size as the old ones. Thankfully eTrailer.com had the kit and it shipped within 24 hours. It bolted right on and everything I needed was included in the kit. Very happy with the product and the order process and shipping time from eTrailer. I would recommend this product to anyone.



by:

The trailer these lights are installed on is used only during waterfowl hunting going into blackish water, swamp water, ice and snow and traveling through 3 states I hunt. I'm going into my second season and all the LEDs are lite.



by:

This is an excellent kit which seems to be a very good quality and is quite easy to install on the trailer. This will permit me back my trailer into the water without having to unplug before getting the lights wet. Also I would advise anyone doing a trailer wiring to keep in mind that if problems arise it most likely is due to a poor ground wire connection. The only problems I had with the lighting installation was due to ground wire not having sufficient contact.



by:

Awesome direct replacement for my boat trailer. Much brighter than original that came on trailer

Dennis

6/8/2023

Still working as good as new

Etrailer Expert

Mike L.

7/7/2023

@Dennis We're glad to hear that the # TLL56RK taillight kit is still working well for you!


by:

Finally found led replacements that fits perfectly on my 1985 ez loader trailer!!! They were exactly what I was looking for. They are bright and look awesome!!!!!



by:

Exactly as described. Nice kit.



by:

Lights are great quality I love the LED, the only downside is I had to buy my own hardware an connectors because the one you guys send are not good for water, if the connectors were water resistant it would be great an better hardware.



by:

Product worked perfectly. More important; I experienced the best Customer Service
in many years. It seems no Company cares about the customer. Jessica B.
was outstanding. From information, shipping to meet my needs to the follow-up
for delivery. I work for a Fortune 100 company for 32 years our customer service
had not matched this in over 15 years. Thanks for your product knowledge and
making a difference in customer satisfaction. Refreshing !! I will definetly be a returning customer and refer etrailer to my friends.



by:

Worked out great, this was an exact fit and easy install



by:

They work great and hopefully last a long time



by:

Great lights. Easy to install. Very bright and have performed brilliantly for many a mile.



by:

These are the best quality lights ever made and have used them for the last 20 years on several boats without fail because they really are waterproof. But the wiring harness and hardware is not but that's OK, just use your own stainless steel hardware and a more robust harness and your golden. FYI Over the years I've used every heat shrink wrap and other alleged waterproof products for connectors that have always failed. Hint, strip wires and twist the leads, fold them over and trim, then use electrical tape. If tightly wrapped with an ample amount of tape it will never fail and this includes below deck. fittings, ain't pretty but for me it's always been bullet proof.



by:

Couldn’t be happier! Installation (removal of old bulb-type tail lights) and installed these in under 30 minutes. These lights are SO MUCH BRIGHTER!! Will definitely purchase again. Highly recommend these lights to whoever needs new trailer tail lights.

James

8/22/2022

One year later and these lights have not disappointed. They’re working as well as when installed. Great product, price, shipping and an easy install. What’s not to like?



by:

Great trailer lights.



by:

Submerged over 40 times still work great

James

8/19/2023

Still working great



by:

Very slight modification to make fit but was easy enough. Work well after one year of use. Worth the money.



by:

Easy install. Everything I needed



by:

LED lights on tail light kit is more than generous. It was easy to rewire into trailer. The only difficulty and perhaps my error is to wire it together with the old set for serious turning and stop signals. I drive mostly highways, curvy, etc and want my trailer to be noticed before a costly accident.
The light set came quickly and as depicted in advertisement. Thanks for a good purchasing choice.


25
333
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Troubleshooting Tail Lights and License Plate Light on the LED Trailer Light Kit # TLL56RK
    There are a few things that you can do to troubleshoot your wiring situation and hopefully get you back out there to fish. You will want to start off by checking the connector on both your trailer and your 2005 Chevy Trailblazer as well as the connectors on your adapter. Make sure they are clean and free of any dirt or debris. If that looks good then you will want to check all of your grounds to make sure they are connected to a clean, bare-metal surface. If the adapter that you are using...
    view full answer...
    Image 1 for
  • Replacement LED Submersible Light Kit, Bar Light and Clearance Lights for a Boat Trailer
    For a light bar to go along with the Optronics Light Kit part # TLL56RK you could use the Optronics Light Bar part # MCL93RB, this light bar is LED and submersible. For clearance lights you could go with the part # 47-99-005 for red and part # 47-99-006 for amber.
    view full answer...
  • Driver Side Trailer Taillight to Match # STL65RB
    The matching driver side to the LED Tail Light # STL56RB is the part # STL57RB. We also have these two as a kit with wiring and a license plate bracket with part # TLL56RK.
    view full answer...
  • How Does Wiring of Trailer Lighting Kit # TLL56RK Usually Route on Trailer
    The harness that comes with the # TLL56RK is 25 feet in length. Depending on how your trailer is set up you could easily run wires to either side or down the middle and then split off. For more info on this I attached an install video for this for you to check out as well.
    view full answer...
  • Adding LED Lights Running off Battery and Switch in Enclosed Trailers
    Are you looking for internal or external lights? We can help you with both. For internal lights a good option is part # ILL22CHB because of how bright it is. It's an 830 lumens light which is brighter than most for sure. It's a 2 wire install so connecting it to the switch won't be an issue. For the wire you can use part # 10-2-1 which is sold by the foot so you want to select 60 feet when ordering. then two of part # DW05705-1 fits the 10 gauge wire and should fit your battery. The rings...
    view full answer...
  • What is Needed to Convert Trailer Wiring to LED
    To convert a trailer to LED taillights is just a matter of swapping the fixtures with LED models or replacing the bulbs of the fixtures with the LED version. Unlike vehicles you don't have to swap in any special harnesses or resistors. Since you mentioned wanting a kit with wiring though we do have options like the # TLL56RK that include that as well as a pair of LED taillights. I also attached a link to a page that has all of the LED taillights we offer as well. If you see a light...
    view full answer...
  • Does LED Tail Light Kit TLL56RK Have Side Marker Lights
    The description of the LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK does specify that the lights have a side marker function (in the second line under "Features"). I have added a link to a help article which details trailer lighting requirements, which are different not only for different trailer widths, but also lengths and weights. I have also added a link to a video installation I recommend taking a look at which details the side marker function of the LED...
    view full answer...
  • Replacement Tail Light for 1990 Douglas Boat Trailer
    All of our Wesbar Tail lights that are incandescent bulbs use a 1157. To get your replacement bulb, you will need to remove the other bulb and read the number on it. Since you seem concerned about breaking your lights, it may be a good time to consider upgrading your tail lights. I recommend the following LED options: Waterproof, Over 80" LED Trailer Light Kit # TLL160RK Miro-Flex LED Trailer Tail Lights # STL28RB & # STL29RB Waterproof, Under 80" LED Trailer Light Kit with 25' Wiring...
    view full answer...
  • Availability of Just the Light Assemblies of Under 80" LED Trailer Light Kit # TLL56RK
    Yes, for just the light assemblies you would want the # STL56RB and # STL57RB which is what the part # TLL56RK comes with.
    view full answer...
  • Recommended Trailer Light Kit for 4x8 Kayak Trailer
    The trailer light kit I recommend for your 4x8 trailer is the Optronics Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness # TL5RK. This is an incandescent light kit. If you prefer LED lights then the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger # TLL56RK is the route to go. Even though you don't plan on submerging the trailer in water, the option is there and the sealed light housings are more durable.
    view full answer...
  • Replacement Tail Lights for Boat Trailer
    A 2015 Mako Pro Skiff 17 is a nice fishing boat but I assume you need taillights for the boat's trailer. While we do not have any specifics on a trailer for that boat, we definitely have taillights that will work. I highly recommend the LED Combination Tail Light Kit because they are bright, long-lasting with a lifetime warranty on the LEDs, and have waterproof housing to ensure they work perfectly with your boat trailer. To get the right kit you only need to know how wide the trailer...
    view full answer...
    Image 1 for
  • Upgrading Pop-Up Camper Taillights to LED
    Although they are a bit smaller than the lamps you are replacing, the Optronics # TTL56RK light kit would work great for you. The lamps would provide the same tail light, turn signal and brake light functions as the lamps you are replacing. The drivers side lamp will also provide illumination for the license plate. The only spot where you might have an issue would be in how the lamp attaches to the camper. The TLL56RK lamps are bolt mounted, with the head of the bolts fitting into slots...
    view full answer...
  • Mount Stud Dimensions for Waterproof, Under 80" LED Trailer Light Kit # TLL56RK
    Yes, the mounting hole distance on the lights of the # TLL56RK that you referenced are 2 inches apart on center. These will fit in the space you have that's 6 by 3-1/2 inches as well.
    view full answer...
  • Replacement Tail Lights for Boat Trailer Carrying 2018 Tracker Pro Team 175 TXW
    Rocks are definitely a menace to boat trailers but we can get you back out and fishing in no time on you 2018 Tracker Pro Team 175 TXW. Although we don't have specifics about the specific trailer you have, we absolutely have submersible LED trailer lights that will work for you. I highly recommend the LED Combination Tail Light Kit because both kits are bright, are extremely durable (the LEDs have a lifetime warranty), and have waterproof housing so they are submersible. To get the...
    view full answer...
    Image 1 for
  • How to Determine Correct Tail Lights for Boat Trailer
    There is a way for you to pretty easily find out the tail lights you need, although the SAE numbers just means it has been approved by the Society of Engineers and aren't a part number, and we don't have any way of knowing specific lights for any trailer. So you will simply need to measure your current tail lights and find the one that most closely matches your measurement, and also know if your lights are surface mounted or recessed mounted. For example, the Optronics LED Combination...
    view full answer...
  • Trailer Taillight Kit for 2002 Ranger Boat Trailer to Replace Wraparound Taillights
    While the wraparound taillights are no longer available we do have the LED taillight kit part # TLL56RK which will give you a somewhat similar setup that also includes the wiring harness and 4-way.
    view full answer...
  • How to Determine if Wiring Harness Included With TLL56RK Trailer Wiring Kit is Long Enough
    When I rewired my PWC trailer, I used a length of string to run from the trailer coupler back to each lamp then measured the string. I then added about 5 feet to that length for good measure to account for the length needed to reach the connector on the vehicle. The # TLL56RK kit includes a wishbone-style harness that is 25 feet in length, which I'd consider a great choice for a trailer up to 20 feet in length. If you click the provided link, you can see video showing the # TLL56RK kit...
    view full answer...
  • Replacement Taillights for Boat Trailer
    The best option we can give you are replacement taillights, which are a good idea as well because you can upgrade to LED lights. These draw much less power and are guaranteed to last for life. If your trailer is over 80 inches wide I recommend the Optronics LED Combination Trailer Tail Lights # TLL160RK. If it is less than 80 inches wide the correct kit is the LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK. I have added links to video reviews as well.
    view full answer...
    Image 1 for
  • Replacement LED Tail Lights for 2017 Karavan LB-2200-70-17-SF-ST2-CR Boat Trailer
    For LED tail lights for your 2017 Karavan boat trailer I recommend the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger # TLL56RK. These lights are virtually identical to the lights that came with the trailer so they will make a perfect replacement. They are 6-1/16" wide x 3-5/8" tall x 2-1/4" deep and come with a 25' wiring harness with a 4-way connection. These lights are waterproof and the built in license plate bracket is corrosion resistant....
    view full answer...
  • What Are The 3 Blue Quick Splice Wire Connectors Used For In The LED Tail Light Kit # TLL56RK?
    The 3 Quick Splices # SWC502905-1 that are included with the LED Combination Tail Light Kit # TLL56RK can be used to tie into any additional side marker lights or clearance lights that may also be on the trailer. Personally I recommend only using Heat Shrink Butt Connectors # DW05744-5 for all the wiring connections. These will keep out moisture from the connection and protect against corrosion that leads to lights not working properly.
    view full answer...
  • Is Conspicuity Tape Required for Use on Trailers Less Than 80 Inches Wide
    According to the regulations (see the link I provided) conspicuity treatments are NOT required for trailers that are under 80 inches wide. This being said, it's never a bad idea to make yourself more visible to traffic but it's not a requirement.
    view full answer...
  • Trailer Light Kit With Tail Lights & 4-Flat Connector
    We absolutely have a tail light kit you can use with two tail lights as well as a 4-flat connector, which is the following: - LED Combination Tail Light Kit for Trailers under 80" Wide # TLL56RK This comes with driver and passenger side tail lights, hardware, and 4-flat wiring harness, and will work with any type of vehicle that has a 4-flat. It also comes with a license plate bracket standard which you can use if need be but don't have to. I have added a link below to a video install...
    view full answer...
  • LED Replacement Lights for Peterson M444
    We do have a couple of really good options for you to replace your Peterson # # PM444L and # PM444, but you do have a keen eye because the Tail Light Kit # TLL16RK will not work with the 2-1/4" spacing you have. One of the lights would interfere because it is too long overall and the back of the light cannot be rotated. Instead, for a couple of similar options that have 2" on center spacing and the needed space for you to mount them I recommend checking out the LED Combination Tail Light...
    view full answer...
  • Mounting Bolt Pattern of Optronics Trailer Light Kit TLL56RK
    The distance between the mounting holes of the Optronics trailer light kit part # TLL56RK is 2 inches like you mentioned needing. The distance from the mounting holes to the top of the light is 1.825 inches.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Tyler C
Written by:
Tyler C
Employee Joshua S
Video Edited:
Joshua S
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.