Buyers Products Class 4 Service Body Long Hitch Receiver - Accepts All 2" Hitch Accessories
(10 reviews)
Price: $449.58
In Stock
Buyers Products Class 4 Service Body Long Hitch Receiver - Accepts All 2" Hitch Accessories
Item # 3371801055
Retail:$649.99
Our Price: $449.58
You Save: $200.41
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (10)
- Q & A (0)
- Videos (1)
- Photos
Buyers Products Heavy Duty Receiver Hitch - 3371801055
- 2 Inch Hitch
- 10000 lbs GTW
- Bolt-On
- Class IV
- Buyers Products
- 1000 lbs TW
- No Drop
The heavy duty Class 4 Service Body Hitch Receiver from Buyers Products is designed for service truck bodies and rated up to 10,000 lb. It accepts a 2" hitch and accessories. The long hitch receiver features a black powder coated finish for corrosi on resistance.
Features:
- Specially designed for service trucks
- Accepts 2" hitches and accessories
- Corrosion-resistant powder coated finish
- Long Hitch Receiver design
- Carbon steel construction
- Powder coat finish
Specs:
- Maximum gross trailer weight: 10,000 lbs
- Maximum tongue weight: 1,000 lbs
- Overall Width: 44"
1801055 Buyers Products Class 4 Service Body Long Hitch Receiver - Accepts All 2 Inch Hitch Accessories
Tech Tip
Welding required
Video of Buyers Products Class 4 Service Body Long Hitch Receiver - Accepts All 2" Hitch Accessories
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Buyers Products Heavy Duty Truck Hitch - Weld-On Hitch - 3371801055 Review
Speaker 1: Today we're going to take a look at the Class Four two inch by two inch service body long hitch receiver. Now this heavy duty Class Four service body hitch receiver is designed for service truck bodies rated up to 10,000 pounds. This long hitch receiver is specifically designed for the service trucks. When they say long, it's measuring the length of the hitch tube. So from the front to the very back of the hitch tube, if you put a ruler on that, it's going to be right at 12 inches long.It is an open hitch tube, I can raise it up so you can see it, it does go all the way through. It is designed to accept two inch ball mounts and accessories.
This hitch has a nice corrosion resistant, powder coat finish to it. It is a carbon steel construction. Again, the maximum gross trailer weight capacity is 10,000 pounds. Maximum ton weight capacity is 1,000 pounds. And it does come with the included Grade A installation hardware to install this to your vehicle.But that should do it for the review on the Class Four two inch by two inch service body long hitch receiver..
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Buyers Products Class 4 Service Body Long Hitch Receiver - Accepts All 2" Hitch Accessories - 3371801055
Average Customer Rating: 4.8 out of 5 stars (10 Customer Reviews)
The heavy duty Class 4 Service Body Hitch Receiver from Buyers Products is designed for service truck bodies and rated up to 10,000 lb. It accepts a 2" hitch and accessories. The long hitch receiver features a black powder coated finish for corrosi on resistance.by: Shipping02/27/2023
by: David 09/30/2023
Should work great. Going to mount it on Box truck on top of 44" crossmember. Will send a pic when it is finished.
by: Mark01/05/2023
Hitch fit as advertised, tech support was helpful with dimensions, etc. 4-star review is due to half the hardware missing upon delivery. May consider double-boxing hardware for shipping.
by: Evgenii05/30/2023
very good and high quality product, installed on ford e350 (ambulance)
by: Pete 04/12/2023
Fast shipping, as described, A+++++++
by: Ricky 09/29/2022
Great product, great turnaround on ship ment!
by: Danny 04/24/2021
Very strong product built very well great service. Not to impressed with UPS delivery.
by: Nicholas 02/17/2024
by: David 12/07/2021
by: John 11/02/2021
10
10
See what our Experts say about this Buyers Products Heavy Duty Receiver Hitch
- Overall Width of Buyers Products Class 4 Service Body Long Hitch Receiver # 3371801055The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver # 3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.
view full answer...
- Can the Buyer's Products Class 4 Service Body Hitch Be Bolted On or Welded?Both! I checked with Buyer's Products and their Class 4 Service Body Long Hitch item # 3371801055 can either be welded on or bolted on with the included hardware. This is a universal hitch so you'll need to drill into your trucks frame if you go the bolt on route.
view full answer... - Universal Trailer Hitch to Mount to Bottom of Frame on 1995 International 4700The best option we have available for your International 4700 is the Buyers Products Class 4 Hitch Receiver # 3371801055. This can be either bolted or welded to the bottom of the frame rails on your truck and it features a long receiver design to help clear the flat bed for easier access. It has a towing capacity of 10,000 pounds and a tongue weight limit of 1,000 pounds. I have attached a short video review that you can check out as well.
view full answer... - Higher Capacity Hitch that Fits 2007 Winnebago Sightseer 29RWe have a universal style weld-on hitch that fits your 2007 Winnebago Sightseer 29R with the Curt Class V hitch part # 15902 but the hitch you mentioned does not fit.
view full answer... - Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 SeriesThe Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs.
view full answer... - Recommended Trailer Hitch for 2012 Ford E-350 with Service Body Since your 2012 Ford E-350 has a service body your best option for a hitch is with a weld-on unit like the Buyers Products Class 5 # 3371801050L. This particular unit includes the necessary mounting plates and has more than enough capacity for whatever the E-350 itself can handle. Because of the modifications at the rear that a service body design requires, a standard custom (bolt-on) hitch won't be compatible. Another good option, depending on how long the service body extends rearward,...
view full answer... - Recommended Trailer Hitch for 1995 GMC P3500I do have a great option for you, however the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41121 isn't going to fit your 1995 GMC P3500. This particular hitch is designed for certain model years of the Chevy and GMC full size van and it's not going to line up to the frame rails of your P3500. There isn't a similar custom hitch available for your vehicle so your best option is to go with a universal weld-on unit like the Draw-Tite # 41990 paired with the 7" # 4907 or 16" # 4916 Weld-On...
view full answer... - Recommended Trailer Hitch Receiver and Weight Distribution System for 2007 HS M30SFS and TrailerFor your 2007 HS ADMIRAL SVE, your Hidden Hitch receiver sounds like it is capable of towing your trailer. The rated 5,000 lb capacity is without weight distribution, but from my research it is rated for 6,000 lbs with weight distribution just like the Curt # C13701. If you are needing a weight distribution system for this hitch receiver you likely will need a system rated for 15% of your total trailer weight. That puts you around 540 lbs roughly. You want a system that falls in the...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.