Instructions for Class V Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube

Question

Question:

When I click on instructions for 41990 it goes to something else

asked by: Fred

0

Expert Reply:

I'm not sure why you aren't able to pull up the instructions for the Draw-Tite Trailer Hitch # 41990 because the link is working okay for me but regardless I cut and linked the instructions to photos and attached them to the page for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I have attached a photo showing what the distance is between the bolt holes and the dimensions of the mounting brackets for the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-16 that you can reference. The installation instructions…

view full answer...

Answer 5

I do have an option for you but there aren't any custom fit trailer hitch options for a 2006 Thomas School Bus. That said, we do still have universal options which can be installed either via welding or cutting/drilling. For this, I recommend the…

view full answer...

Answer 6

To flat tow a 2024 Chevy Silverado 1500 you will need the following parts: Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 and item #RM-674 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item #RM86MR…

view full answer...

Answer 7

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 8

You were on the right track already with the #41990 for your 2010 Mitsubishi Fuso FE145. There are no custom fit hitches so a universal weld-on is the only option. We have the #41990-07 that comes with 7" brackets, the #41990-16 with 16"…

view full answer...

Answer 9

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

view full answer...

Answer 10

It sounds like you're asking about the deflection of the 2K Timbren Axle-Less Trailer Suspension #ASR2KHDS04, which Timbren has listed as 1-5/8" in the attached diagram - see the (r) label. If you are talking about something else please let…

view full answer...

Answer 11

I have a recommendation for you as the Bulldog Winch Hitch Mount Storage Bracket #BDW20154 is only designed to hold a winch when not in use. It does not have the structure required to operate a winch. For a 12,000LB Winch #BDW10040 you will need a…

view full answer...

Answer 12

The two highest rated trailer hitch receivers we have for RV's are both Class III hitches rated for 5,000 pounds gross trailer weight and 500 pounds of tongue weight. Curt hitches #C13702 and #C13701 are adjustable and will fit RV frames from 18…

view full answer...